Bootlogs¶
Note: At the time of writing (2021-06), we have enabled debug-logging for the ARM Trusted Firmware BL2 and BL3 by default to assist in the troubleshooting of any RAM related issues. We may reduce the verbosity in the future.
Firmware v0.8.5 + OpenWrt 21.02 Snapshot (Kernel 5.10)¶
INFO: RCW BOOT SRC is QSPI
INFO: RCW BOOT SRC is QSPI
WARNING: Using I2C3 for DDR SPD
INFO: platform clock 700000000
INFO: DDR PLL 2100000000
INFO: time base 11 ms
INFO: Parse DIMM SPD(s)
INFO: Controller 0
INFO: DIMM 0
INFO: addr 0x51
WARNING: Using I2C3 for DDR SPD
WARNING: tx_byte nodev 85
WARNING: Using I2C3 for DDR SPD
WARNING: Using I2C3 for DDR SPD
WARNING: tx_byte nodev 85
WARNING: Using I2C3 for DDR SPD
INFO: checksum 0x6cc5df74
INFO: n_ranks 2
INFO: rank_density 0x200000000
INFO: capacity 0x400000000
INFO: die density 0x5
INFO: primary_sdram_width 64
INFO: ec_sdram_width 0
INFO: device_width 8
INFO: package_3ds 0
INFO: rc 0x21 (Raw card B1)
INFO: B1 SPD DQ mapping error fixed
INFO: rdimm 0
INFO: mirrored_dimm 1
INFO: n_row_addr 16
INFO: n_col_addr 10
INFO: bank_addr_bits 0
INFO: bank_group_bits 2
INFO: edc_config 0
INFO: burst_lengths_bitmask 0xc
INFO: tckmin_x_ps 833
INFO: tckmax_ps 1600
INFO: caslat_x 0x3ffc00
INFO: taa_ps 13750
INFO: trcd_ps 13750
INFO: trp_ps 13750
INFO: tras_ps 32000
INFO: trc_ps 45750
INFO: trfc1_ps 350000
INFO: trfc2_ps 260000
INFO: trfc4_ps 160000
INFO: tfaw_ps 21000
INFO: trrds_ps 3300
INFO: trrdl_ps 4901
INFO: tccdl_ps 5000
INFO: trfc_slr_ps 0
INFO: twr_ps 15000
INFO: refresh_rate_ps 7800000
INFO: dq_mapping 0x2b
INFO: dq_mapping 0x16
INFO: dq_mapping 0x2c
INFO: dq_mapping 0xb
INFO: dq_mapping 0x2c
INFO: dq_mapping 0x16
INFO: dq_mapping 0x2c
INFO: dq_mapping 0xc
INFO: dq_mapping 0x0
INFO: dq_mapping 0x0
INFO: dq_mapping 0x2c
INFO: dq_mapping 0xc
INFO: dq_mapping 0x15
INFO: dq_mapping 0x36
INFO: dq_mapping 0x2b
INFO: dq_mapping 0x15
INFO: dq_mapping 0xb
INFO: dq_mapping 0x36
INFO: dq_mapping_ors 1
INFO: DIMM 1
INFO: done with controller 0
INFO: cal cs
INFO: cs_in_use = 3
INFO: cs_on_dimm[0] = 3
NOTICE: UDIMM CT16G4SFD824A.C16F
INFO: Time after parsing SPD 568 ms
INFO: Synthesize configurations
INFO: cs 0
INFO: odt_rd_cfg 0x0
INFO: odt_wr_cfg 0x5
INFO: odt_rtt_norm 0x3
INFO: odt_rtt_wr 0x0
INFO: auto_precharge 0
INFO: cs 1
INFO: odt_rd_cfg 0x0
INFO: odt_wr_cfg 0x0
INFO: odt_rtt_norm 0x0
INFO: odt_rtt_wr 0x0
INFO: auto_precharge 0
INFO: cs 2
INFO: odt_rd_cfg 0x0
INFO: odt_wr_cfg 0x0
INFO: odt_rtt_norm 0x0
INFO: odt_rtt_wr 0x0
INFO: auto_precharge 0
INFO: cs 3
INFO: odt_rd_cfg 0x0
INFO: odt_wr_cfg 0x0
INFO: odt_rtt_norm 0x0
INFO: odt_rtt_wr 0x0
INFO: auto_precharge 0
INFO: ctlr_init_ecc 0
INFO: x4_en 0
INFO: ap_en 0
INFO: ctlr_intlv 0
INFO: ctlr_intlv_mode 0
INFO: ba_intlv 0x40
INFO: data_bus_used 0
INFO: otf_burst_chop_en 1
INFO: burst_length 0x6
INFO: dbw_cap_shift 0
INFO: Assign binding addresses
INFO: ctlr_intlv 0
INFO: rank density 0x200000000
INFO: CS 0
INFO: base_addr 0x0
INFO: size 0x400000000
INFO: CS 1
INFO: base_addr 0x0
INFO: size 0x400000000
INFO: base 0x0
INFO: Total mem by assignment is 0x400000000
INFO: Calculate controller registers
INFO: Skip CL mask for this speed 0x4000
INFO: Skip caslat 0x4000
INFO: cs_in_use = 0x3
INFO: cs0
INFO: _config = 0x80050422
INFO: cs[0].bnds = 0x3ff
INFO: cs_in_use = 0x3
INFO: cs1
INFO: _config = 0x80000422
INFO: cs[1].bnds = 0x3ff
INFO: sdram_cfg[0] = 0xc5004000
INFO: sdram_cfg[1] = 0x401141
INFO: sdram_cfg[2] = 0x0
INFO: timing_cfg[0] = 0xd1770018
INFO: timing_cfg[1] = 0xf2fc8245
INFO: timing_cfg[2] = 0x594197
INFO: timing_cfg[3] = 0x2161100
INFO: timing_cfg[4] = 0x220002
INFO: timing_cfg[5] = 0x5401400
INFO: timing_cfg[6] = 0x0
INFO: timing_cfg[7] = 0x26600000
INFO: timing_cfg[8] = 0x5446a00
INFO: timing_cfg[9] = 0x0
INFO: dq_map[0] = 0xad6b0bb0
INFO: dq_map[1] = 0x5ac32c30
INFO: dq_map[2] = 0x576ad52c
INFO: dq_map[3] = 0xd8000001
INFO: sdram_mode[0] = 0x3010631
INFO: sdram_mode[1] = 0x100200
INFO: sdram_mode[9] = 0x8400000
INFO: sdram_mode[8] = 0x500
INFO: sdram_mode[2] = 0x10631
INFO: sdram_mode[3] = 0x100200
INFO: sdram_mode[10] = 0x400
INFO: sdram_mode[11] = 0x8400000
INFO: sdram_mode[4] = 0x10631
INFO: sdram_mode[5] = 0x100200
INFO: sdram_mode[12] = 0x400
INFO: sdram_mode[13] = 0x8400000
INFO: sdram_mode[6] = 0x10631
INFO: sdram_mode[7] = 0x100200
INFO: sdram_mode[14] = 0x400
INFO: sdram_mode[15] = 0x8400000
INFO: eor = 0x40000000
INFO: interval = 0x1ffe07ff
INFO: zq_cntl = 0x8a090705
INFO: ddr_sr_cntr = 0x0
INFO: clk_cntl = 0x2400000
INFO: cdr[0] = 0x80080000
INFO: cdr[1] = 0xc0
INFO: wrlvl_cntl[0] = 0x8675f605
INFO: wrlvl_cntl[1] = 0x8040a0c
INFO: wrlvl_cntl[2] = 0x130f1014
INFO: debug[28] = 0x7b
INFO: Time before programming controller 836 ms
INFO: Program controller registers
INFO: Reading debug[9] as 0x2d003200
INFO: Reading debug[10] as 0x29003500
INFO: Reading debug[11] as 0x3a004800
INFO: Reading debug[12] as 0x3f004300
INFO: cpo_min 0x29
INFO: cpo_max 0x48
INFO: debug[28] 0x6a007b
WARNING: Warning: A009942 requires setting cpo_sample to 0x5f
INFO: *0x1080000 = 0x3ff
INFO: *0x1080008 = 0x3ff
INFO: *0x1080080 = 0x80050422
INFO: *0x1080084 = 0x80000422
INFO: *0x1080100 = 0x2161100
INFO: *0x1080104 = 0xd1770018
INFO: *0x1080108 = 0xf2fc8245
INFO: *0x108010c = 0x594197
INFO: *0x1080110 = 0xc5004000
INFO: *0x1080114 = 0x401141
INFO: *0x1080118 = 0x3010631
INFO: *0x108011c = 0x100200
INFO: *0x1080120 = 0x1600086b
INFO: *0x1080124 = 0x1ffe07ff
INFO: *0x1080128 = 0xdeadbeef
INFO: *0x1080130 = 0x2400000
INFO: *0x1080160 = 0x220002
INFO: *0x1080164 = 0x5401400
INFO: *0x108016c = 0x26600000
INFO: *0x1080170 = 0x8a090705
INFO: *0x1080174 = 0xc675f605
INFO: *0x1080190 = 0x8040a0c
INFO: *0x1080194 = 0x130f1014
INFO: *0x1080200 = 0x10631
INFO: *0x1080204 = 0x100200
INFO: *0x1080208 = 0x10631
INFO: *0x108020c = 0x100200
INFO: *0x1080210 = 0x10631
INFO: *0x1080214 = 0x100200
INFO: *0x1080220 = 0x500
INFO: *0x1080224 = 0x8400000
INFO: *0x1080228 = 0x400
INFO: *0x108022c = 0x8400000
INFO: *0x1080230 = 0x400
INFO: *0x1080234 = 0x8400000
INFO: *0x1080238 = 0x400
INFO: *0x108023c = 0x8400000
INFO: *0x1080250 = 0x5446a00
INFO: *0x1080270 = 0xffff
INFO: *0x1080280 = 0xdeedeeee
INFO: *0x1080284 = 0xeededd21
INFO: *0x1080288 = 0x21121111
INFO: *0x108028c = 0x112122de
INFO: *0x1080290 = 0x1
INFO: *0x1080400 = 0xad6b0bb0
INFO: *0x1080404 = 0x5ac32c30
INFO: *0x1080408 = 0x576ad52c
INFO: *0x108040c = 0xd8000001
INFO: *0x1080b20 = 0x8080
INFO: *0x1080b24 = 0x80000000
INFO: *0x1080b28 = 0x80080000
INFO: *0x1080b2c = 0xc0
INFO: *0x1080bf8 = 0x20502
INFO: *0x1080bfc = 0x100
INFO: *0x1080c00 = 0x40000000
INFO: *0x1080f04 = 0x2
INFO: *0x1080f08 = 0x9
INFO: *0x1080f0c = 0x14000c20
INFO: *0x1080f24 = 0x2d003200
INFO: *0x1080f28 = 0x29003500
INFO: *0x1080f2c = 0x3a004800
INFO: *0x1080f30 = 0x3f004300
INFO: *0x1080f34 = 0x7000
INFO: *0x1080f48 = 0x1
INFO: *0x1080f4c = 0x94000000
INFO: *0x1080f50 = 0xc001100
INFO: *0x1080f54 = 0xa001500
INFO: *0x1080f58 = 0x1a002700
INFO: *0x1080f5c = 0x1f002200
INFO: *0x1080f60 = 0x28000000
INFO: *0x1080f64 = 0x9000
INFO: *0x1080f68 = 0x20
INFO: *0x1080f70 = 0x6a007b
INFO: *0x1080f94 = 0x80000000
INFO: *0x1080f9c = 0x2c002a00
INFO: *0x1080fa0 = 0x2c002a00
INFO: *0x1080fa4 = 0x2b002800
INFO: *0x1080fa8 = 0x2b002900
INFO: *0x1080fb0 = 0x3
INFO: *0x1080fb4 = 0x1f1d1d1f
INFO: *0x1080fb8 = 0x1d1e1e1d
INFO: *0x1080fbc = 0x1e1c1b1e
INFO: *0x1080fc0 = 0x1c1d1d1c
INFO: *0x1080fc4 = 0x1e1e1b20
INFO: *0x1080fc8 = 0x1e201f1f
INFO: *0x1080fcc = 0x1e1c1c1e
INFO: *0x1080fd0 = 0x1d1c1d1c
INFO: *0x1080fd4 = 0x1e1e1c1e
INFO: *0x1080fd8 = 0x1e1f1f1d
INFO: *0x1080fdc = 0x1e1b1a1c
INFO: *0x1080fe0 = 0x1c1c1c19
INFO: *0x1080fe4 = 0x1e1e1c1e
INFO: *0x1080fe8 = 0x1d1f1d1c
INFO: *0x1080fec = 0x1e1d1b1d
INFO: *0x1080ff0 = 0x1b1d1d1c
INFO: *0x1080ff4 = 0x1f1f1f1f
INFO: *0x1080ff8 = 0x1f1f1f1f
INFO: *0x1080ffc = 0x1f000000
NOTICE: 16 GB DDR4, 64-bit, CL=15, ECC off, CS0+CS1
INFO: Time used by DDR driver 1159 ms
NOTICE: BL2: v1.5(debug):8bf4598
NOTICE: BL2: Built : 04:11:44, Jun 22 2021
INFO: Configuring TrustZone Controller
INFO: Value of region base = ffe00000
INFO: Value of region base = 1ffe00000
INFO: Value of region base = fbe00000
INFO: Value of region base = 8480000000
INFO: BL2: Doing platform setup
INFO: BL2: Loading image id 3
INFO: Loading image id=3 at address 0xfbe00000
INFO: Image id=3 loaded: 0xfbe00000 - 0xfbe0c16c
INFO: BL2: Loading image id 5
INFO: Loading image id=5 at address 0x82000000
INFO: Image id=5 loaded: 0x82000000 - 0x8210b046
NOTICE: BL2: Booting BL31
INFO: Entry point address = 0xfbe00000
NOTICE: BL31: v1.5(debug):8bf4598
NOTICE: BL31: Built : 04:11:44, Jun 22 2021
NOTICE: Welcome to LS1088 BL31 Phase
INFO: GICv3 without legacy support detected. ARM GICV3 driver initialized in EL3
INFO: BL31: Initializing runtime services
WARNING: BL31: cortex_a53: CPU workaround for 835769 was missing!
WARNING: BL31: cortex_a53: CPU workaround for 843419 was missing!
INFO: BL31: cortex_a53: CPU workaround for 855873 was applied
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x82000000
INFO: SPSR = 0x3c9
U-Boot 2020.07-rc1-gb47b96d4 (Jun 22 2021 - 04:09:02 +0000)
SoC: LS1088AE Rev1.0 (0x87030010)
Clock Configuration:
CPU0(A53):1600 MHz CPU1(A53):1600 MHz CPU2(A53):1600 MHz
CPU3(A53):1600 MHz CPU4(A53):1600 MHz CPU5(A53):1600 MHz
CPU6(A53):1600 MHz CPU7(A53):1600 MHz
Bus: 700 MHz DDR: 2100 MT/s
Reset Configuration Word (RCW):
00000000: 4000541c 00000040 00000000 00000000
00000010: 00000000 000a0000 00300000 00000000
00000020: 010011a0 00002580 00000000 00000000
00000030: 013fe60b 00000000 00002c03 00000000
00000040: 00000000 00000000 00000000 00000000
00000050: 00000000 00000000 00000000 00000000
00000060: 00000000 00000000 00000089 000009e7
00000070: 44110000 0d007755
DRAM: 15.9 GiB
DDR 15.9 GiB (DDR4, 64-bit, CL=15, ECC off)
DDR Chip-Select Interleaving Mode: CS0+CS1
15.4 GiB available for userspace
Using SERDES1 Protocol: 29 (0x1d)
Using SERDES2 Protocol: 20 (0x14)
PCIe0: pcie@3400000 Root Complex: no link
PCIe1: pcie@3500000 Root Complex: x1 gen2
PCIe2: pcie@3600000 Root Complex: x2 gen3
Retimer: (retimer on, resetting...) DS110DF410 found
OK
USB Hub: No PCI card found in Key B
OK
Fan controller: OK
MMC: FSL_SDHC: 0
Loading Environment from SPI Flash... SF: Detected en25s64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB
OK
uC: MACADDR: 00:0A:FA:24:2D:95
DPMAC7: 00:0A:FA:24:2D:95
DPMAC8: 00:0A:FA:24:2D:96
DPMAC9: 00:0A:FA:24:2D:97
DPMAC10: 00:0A:FA:24:2D:98
DPMAC3: 00:0A:FA:24:2D:99
DPMAC4: 00:0A:FA:24:2D:9A
DPMAC5: 00:0A:FA:24:2D:9B
DPMAC6: 00:0A:FA:24:2D:9C
DPMAC1: 00:0A:FA:24:2D:9D
DPMAC2: 00:0A:FA:24:2D:9E
In: serial
Out: serial
Err: serial
Model: Traverse Ten64
Board: 1064-0201C, boot from QSPI
Net: eth0: DPMAC1@xgmii, eth1: DPMAC2@xgmii, eth2: DPMAC3@qsgmii, eth3: DPMAC4@qsgmii, eth4: DPMAC5@qsgmii, eth5: DPMAC6@qsgmii, eth6: DPMAC7@qsgmii [PRIME], eth7: DPMAC8@qsgmii, eth8: DPMAC9@qsgmii, eth9: DPMAC10@qsgmii
SF: Detected en25s64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB
device 0 offset 0x300000, size 0x200000
SF: 2097152 bytes @ 0x300000 Read: OK
device 0 offset 0x5c0000, size 0x40000
SF: 262144 bytes @ 0x5c0000 Read: OK
crc32+
fsl-mc: Booting Management Complex ... SUCCESS
fsl-mc: Management Complex booted (version: 10.20.4, boot status: 0x1)
Hit any key to stop autoboot: 0
*** U-Boot Boot Menu ***
Normal boot
Built-in recovery
Boot from NVMe
Boot from USB
Boot from SD
Boot OpenWrt from NAND
Boot from network
Boot from SATA
U-Boot console
Press UP/DOWN to move, ENTER to select
Device 0: Vendor: 0x144d Rev: GXA7301Q Prod: S674NE0NC02476
Type: Hard Disk
Capacity: 244198.3 MB = 238.4 GB (500118192 x 512)
... is now current device
Scanning nvme 0:1...
** Unable to read file / **
Found EFI removable media binary efi/boot/bootaa64.efi
device 0 offset 0x580000, size 0x40000
SF: 262144 bytes @ 0x580000 Read: OK
device 0 offset 0x600000, size 0x40000
SF: 262144 bytes @ 0x600000 Read: OK
TEN64 ft_board_setup start, blob 0000000090000000
INFO: RNG Desc SUCCESS with status 0
INFO: result 87f423ffa1aeec08
TEN64 ft_board_setup end
Card did not respond to voltage select!
mmc_init: -95, time 19
Scanning disk esdhc@2140000.blk...
Disk esdhc@2140000.blk not ready
Scanning disk nvme#0.blk#0...
Found 3 disks
TEN64 ft_board_setup start, blob 0000000087f00000
TEN64 ft_board_setup already run, not doing anything
BootOrder not defined
EFI boot manager: Cannot load any image
675840 bytes read in 2 ms (322.3 MiB/s)
TEN64 ft_board_setup start, blob 0000000087ee7000
TEN64 ft_board_setup already run, not doing anything
Welcome to GRUB!
DPMAC7@qsgmii Waiting for PHY auto negotiation to complete......... TIMEOUT !
DPMAC7@qsgmii: Could not initialize
DPMAC8@qsgmii Waiting for PHY auto negotiation to complete......... TIMEOUT !
DPMAC8@qsgmii: Could not initialize
DPMAC9@qsgmii Waiting for PHY auto negotiation to complete......... TIMEOUT !
DPMAC9@qsgmii: Could not initialize
DPMAC10@qsgmii Waiting for PHY auto negotiation to complete......... TIMEOUT !
DPMAC10@qsgmii: Could not initialize
error: serial port `com0' isn't found.
error: terminal `serial' isn't found.
error: terminal `serial' isn't found.
GNU GRUB version 2.04
┌────────────────────────────────────────────────────────────────────────────┐
│*OpenWrt │
│ OpenWrt (failsafe) │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
└────────────────────────────────────────────────────────────────────────────┘
Use the ▲ and ▼ keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands
before booting or `c' for a command-line. ESC to return previous
menu.
The highlighted entry will be executed automatically in 0s.
Booting `OpenWrt'
EFI stub: Booting Linux Kernel...
EFI stub: ERROR: Could not determine UEFI Secure Boot status.
EFI stub: Using DTB from configuration table
EFI stub: Exiting boot services and installing virtual address map...
fsl-mc: Deploying data path layout ... SUCCESS
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.10.43 (build@runner-isgbxbcc-project-15763379-concurrent-0) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 8.4.0 r0-ab0210e) 8.4.0, GNU ld (GNU Binutils) 2.34) #0 SMP Thu Jun 17 07:42:32 2021
[ 0.000000] Machine model: Traverse Ten64
[ 0.000000] efi: EFI v2.80 by Das U-Boot
[ 0.000000] efi: RTPROP=0x83dfff8040 SMBIOS=0xf69c6000 MEMRESERVE=0x837a6b4040
[ 0.000000] earlycon: ns16550a0 at MMIO 0x00000000021c0500 (options '115200n8')
[ 0.000000] printk: bootconsole [ns16550a0] enabled
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000083dfffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x83de0e3100-0x83de0e4fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000083dfffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x00000000f69c5fff]
[ 0.000000] node 0: [mem 0x00000000f69c6000-0x00000000f69c6fff]
[ 0.000000] node 0: [mem 0x00000000f69c7000-0x00000000fbcbffff]
[ 0.000000] node 0: [mem 0x00000000fbcc0000-0x00000000fbccffff]
[ 0.000000] node 0: [mem 0x00000000fbcd0000-0x00000000fbdfffff]
[ 0.000000] node 0: [mem 0x0000008080000000-0x00000083dff42fff]
[ 0.000000] node 0: [mem 0x00000083dff43000-0x00000083dff44fff]
[ 0.000000] node 0: [mem 0x00000083dff45000-0x00000083dffebfff]
[ 0.000000] node 0: [mem 0x00000083dffec000-0x00000083dfff0fff]
[ 0.000000] node 0: [mem 0x00000083dfff1000-0x00000083dfff3fff]
[ 0.000000] node 0: [mem 0x00000083dfff4000-0x00000083dfff4fff]
[ 0.000000] node 0: [mem 0x00000083dfff5000-0x00000083dfff7fff]
[ 0.000000] node 0: [mem 0x00000083dfff8000-0x00000083dfffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000083dfffffff]
[ 0.000000] DMA zone: 512 pages in unavailable ranges
[ 0.000000] cma: Reserved 16 MiB at 0x00000000fac00000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 21 pages/cpu s45528 r8192 d32296 u86016
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3982848
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinux root=PARTUUID=28621705-ff1f-2e8b-8410-a3e504886302 rootwait earlycon noinitrd
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x00000000f6c00000-0x00000000fac00000] (64MB)
[ 0.000000] Memory: 15770924K/16185344K available (8192K kernel code, 968K rwdata, 2212K rodata, 896K init, 362K bss, 398036K reserved, 16384K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 256 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000006100000
[ 0.000000] ITS [mem 0x06020000-0x0603ffff]
[ 0.000000] ITS@0x0000000006020000: allocated 65536 Devices @8080080000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x0000008080050000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000008080060000
[ 0.000000] random: get_random_bytes called from start_kernel+0x350/0x54c with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c409fb33, max_idle_ns: 440795203156 ns
[ 0.000002] sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 4398046511103ns
[ 0.008251] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000)
[ 0.018668] pid_max: default: 32768 minimum: 301
[ 0.023409] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.031062] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.039915] rcu: Hierarchical SRCU implementation.
[ 0.044816] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[ 0.052539] Platform MSI: gic-its@6020000 domain created
[ 0.057924] PCI/MSI: /interrupt-controller@6000000/gic-its@6020000 domain created
[ 0.065491] fsl-mc MSI: gic-its@6020000 domain created
[ 0.070687] Remapping and enabling EFI services.
[ 0.075511] smp: Bringing up secondary CPUs ...
[ 0.080296] Detected VIPT I-cache on CPU1
[ 0.080315] GICv3: CPU1: found redistributor 1 region 0:0x0000000006120000
[ 0.080337] GICv3: CPU1: using allocated LPI pending table @0x0000008080070000
[ 0.080360] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.080614] Detected VIPT I-cache on CPU2
[ 0.080627] GICv3: CPU2: found redistributor 2 region 0:0x0000000006140000
[ 0.080648] GICv3: CPU2: using allocated LPI pending table @0x0000008080100000
[ 0.080666] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.080914] Detected VIPT I-cache on CPU3
[ 0.080926] GICv3: CPU3: found redistributor 3 region 0:0x0000000006160000
[ 0.080946] GICv3: CPU3: using allocated LPI pending table @0x0000008080110000
[ 0.080964] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.081217] Detected VIPT I-cache on CPU4
[ 0.081237] GICv3: CPU4: found redistributor 100 region 0:0x0000000006180000
[ 0.081267] GICv3: CPU4: using allocated LPI pending table @0x0000008080120000
[ 0.081296] CPU4: Booted secondary processor 0x0000000100 [0x410fd034]
[ 0.081580] Detected VIPT I-cache on CPU5
[ 0.081595] GICv3: CPU5: found redistributor 101 region 0:0x00000000061a0000
[ 0.081616] GICv3: CPU5: using allocated LPI pending table @0x0000008080130000
[ 0.081634] CPU5: Booted secondary processor 0x0000000101 [0x410fd034]
[ 0.081896] Detected VIPT I-cache on CPU6
[ 0.081911] GICv3: CPU6: found redistributor 102 region 0:0x00000000061c0000
[ 0.081930] GICv3: CPU6: using allocated LPI pending table @0x0000008080140000
[ 0.081949] CPU6: Booted secondary processor 0x0000000102 [0x410fd034]
[ 0.082206] Detected VIPT I-cache on CPU7
[ 0.082221] GICv3: CPU7: found redistributor 103 region 0:0x00000000061e0000
[ 0.082244] GICv3: CPU7: using allocated LPI pending table @0x0000008080150000
[ 0.082263] CPU7: Booted secondary processor 0x0000000103 [0x410fd034]
[ 0.082312] smp: Brought up 1 node, 8 CPUs
[ 0.260455] SMP: Total of 8 processors activated.
[ 0.265184] CPU features: detected: 32-bit EL0 Support
[ 0.270349] CPU features: detected: CRC32 instructions
[ 0.275514] CPU features: detected: 32-bit EL1 Support
[ 0.280716] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.289119] CPU: All CPU(s) started at EL2
[ 0.293253] alternatives: patching kernel code
[ 0.300647] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.310457] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.317916] pinctrl core: initialized pinctrl subsystem
[ 0.323343] SMBIOS 3.0 present.
[ 0.326502] DMI: traverse ten64/ten64, BIOS 2020.07-rc1-gb47b96d4 06/22/2021
[ 0.333707] NET: Registered protocol family 16
[ 0.339086] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.346706] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.355201] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.363759] thermal_sys: Registered thermal governor 'step_wise'
[ 0.364022] cpuidle: using governor ladder
[ 0.374253] ASID allocator initialised with 65536 entries
[ 0.379744] Serial: AMBA PL011 UART driver
[ 0.390945] Machine: Traverse Ten64
[ 0.394459] SoC family: QorIQ LS1088A
[ 0.398135] SoC ID: svr:0x87030010, Revision: 1.0
[ 0.404261] fsl_mc_bus 80c000000.fsl-mc: MC firmware version: 10.20.4
[ 0.413297] fsl_mc_dprc dprc.1: DMA mask not set
[ 0.422728] cryptd: max_cpu_qlen set to 1000
[ 0.427320] ACPI: Interpreter disabled.
[ 0.431222] iommu: Default domain type: Passthrough
[ 0.436350] SCSI subsystem initialized
[ 0.440334] usbcore: registered new interface driver usbfs
[ 0.445880] usbcore: registered new interface driver hub
[ 0.451242] usbcore: registered new device driver usb
[ 0.456482] imx-i2c 2000000.i2c: can't get pinctrl, bus recovery not supported
[ 0.464688] i2c i2c-0: IMX I2C adapter registered
[ 0.469520] imx-i2c 2020000.i2c: can't get pinctrl, bus recovery not supported
[ 0.476872] i2c i2c-1: IMX I2C adapter registered
[ 0.481676] imx-i2c 2030000.i2c: can't get pinctrl, bus recovery not supported
[ 0.489041] i2c i2c-2: IMX I2C adapter registered
[ 0.494421] clocksource: Switched to clocksource arch_sys_counter
[ 0.500692] pnp: PnP ACPI: disabled
[ 0.504506] NET: Registered protocol family 2
[ 0.509206] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.520682] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.529460] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.538194] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.546211] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.552932] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.559963] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.567524] NET: Registered protocol family 1
[ 0.571918] PCI: CLS 0 bytes, default 64
[ 0.576226] kvm [1]: IPA Size Limit: 40 bits
[ 0.580842] kvm [1]: vgic-v2@c0e0000
[ 0.584434] kvm [1]: GIC system register CPU interface enabled
[ 0.590393] kvm [1]: vgic interrupt IRQ9
[ 0.594474] kvm [1]: Hyp mode initialized successfully
[ 0.601322] workingset: timestamp_bits=44 max_order=22 bucket_order=0
[ 0.610319] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.616188] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.626994] layerscape-pcie 3400000.pcie: host bridge /soc/pcie@3400000 ranges:
[ 0.634364] layerscape-pcie 3400000.pcie: IO 0x2000010000..0x200001ffff -> 0x0000000000
[ 0.642953] layerscape-pcie 3400000.pcie: MEM 0x2040000000..0x207fffffff -> 0x0040000000
[ 0.651625] layerscape-pcie 3400000.pcie: PCI host bridge to bus 0000:00
[ 0.658371] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.663889] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.670107] pci_bus 0000:00: root bus resource [mem 0x2040000000-0x207fffffff] (bus address [0x40000000-0x7fffffff])
[ 0.680713] pci 0000:00:00.0: [1957:80c0] type 01 class 0x060400
[ 0.686800] pci 0000:00:00.0: supports D1 D2
[ 0.691092] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.698830] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.704098] pci 0000:00:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256
[ 0.712728] layerscape-pcie 3500000.pcie: host bridge /soc/pcie@3500000 ranges:
[ 0.720094] layerscape-pcie 3500000.pcie: IO 0x2800010000..0x280001ffff -> 0x0000000000
[ 0.728679] layerscape-pcie 3500000.pcie: MEM 0x2840000000..0x287fffffff -> 0x0040000000
[ 0.737334] layerscape-pcie 3500000.pcie: PCI host bridge to bus 0001:00
[ 0.744080] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.749600] pci_bus 0001:00: root bus resource [io 0x10000-0x1ffff] (bus address [0x0000-0xffff])
[ 0.758617] pci_bus 0001:00: root bus resource [mem 0x2840000000-0x287fffffff] (bus address [0x40000000-0x7fffffff])
[ 0.769217] pci 0001:00:00.0: [1957:80c0] type 01 class 0x060400
[ 0.775292] pci 0001:00:00.0: supports D1 D2
[ 0.779587] pci 0001:00:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.786587] pci 0001:01:00.0: [12d8:b304] type 01 class 0x060400
[ 0.792999] pci 0001:01:00.0: supports D1 D2
[ 0.797293] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.804037] pci 0001:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0001:00:00.0 (capable of 8.000 Gb/s with 5.0 GT/s PCIe x2 link)
[ 0.831425] pci 0001:02:01.0: [12d8:b304] type 01 class 0x060400
[ 0.837847] pci 0001:02:01.0: supports D1 D2
[ 0.842141] pci 0001:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.849044] pci 0001:02:02.0: [12d8:b304] type 01 class 0x060400
[ 0.855463] pci 0001:02:02.0: supports D1 D2
[ 0.859757] pci 0001:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.869194] pci 0001:02:01.0: PCI bridge to [bus 03]
[ 0.874218] pci 0001:02:02.0: PCI bridge to [bus 04]
[ 0.879240] pci 0001:01:00.0: PCI bridge to [bus 02-04]
[ 0.884523] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 0.889784] pci 0001:00:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256
[ 0.898310] pci 0001:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 128
[ 0.906836] pci 0001:02:01.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 128
[ 0.915362] pci 0001:02:02.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 128
[ 0.924044] layerscape-pcie 3600000.pcie: host bridge /soc/pcie@3600000 ranges:
[ 0.931410] layerscape-pcie 3600000.pcie: IO 0x3000010000..0x300001ffff -> 0x0000000000
[ 0.939996] layerscape-pcie 3600000.pcie: MEM 0x3040000000..0x307fffffff -> 0x0040000000
[ 0.948648] layerscape-pcie 3600000.pcie: PCI host bridge to bus 0002:00
[ 0.955393] pci_bus 0002:00: root bus resource [bus 00-ff]
[ 0.960911] pci_bus 0002:00: root bus resource [io 0x20000-0x2ffff] (bus address [0x0000-0xffff])
[ 0.969930] pci_bus 0002:00: root bus resource [mem 0x3040000000-0x307fffffff] (bus address [0x40000000-0x7fffffff])
[ 0.980527] pci 0002:00:00.0: [1957:80c0] type 01 class 0x060400
[ 0.986600] pci 0002:00:00.0: supports D1 D2
[ 0.990893] pci 0002:00:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.997878] pci 0002:01:00.0: [144d:a80a] type 00 class 0x010802
[ 1.003976] pci 0002:01:00.0: reg 0x10: [mem 0x3040000000-0x3040003fff 64bit]
[ 1.011577] pci 0002:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0002:00:00.0 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link)
[ 1.027665] pci 0002:00:00.0: BAR 8: assigned [mem 0x3040000000-0x30400fffff]
[ 1.034847] pci 0002:01:00.0: BAR 0: assigned [mem 0x3040000000-0x3040003fff 64bit]
[ 1.042574] pci 0002:00:00.0: PCI bridge to [bus 01-ff]
[ 1.047829] pci 0002:00:00.0: bridge window [mem 0x3040000000-0x30400fffff]
[ 1.055014] pci 0002:00:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256
[ 1.063538] pci 0002:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256
[ 1.073028] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.079763] printk: console [ttyS0] disabled
[ 1.084091] 21c0500.serial: ttyS0 at MMIO 0x21c0500 (irq = 16, base_baud = 21875000) is a 16550A
[ 1.092948] printk: console [ttyS0] enabled
[ 1.092948] printk: console [ttyS0] enabled
[ 1.101336] printk: bootconsole [ns16550a0] disabled
[ 1.101336] printk: bootconsole [ns16550a0] disabled
[ 1.111461] 21c0600.serial: ttyS1 at MMIO 0x21c0600 (irq = 16, base_baud = 21875000) is a 16550A
[ 1.120801] arm-smmu 5000000.iommu: probing hardware configuration...
[ 1.127241] arm-smmu 5000000.iommu: SMMUv2 with:
[ 1.131856] arm-smmu 5000000.iommu: stage 1 translation
[ 1.137164] arm-smmu 5000000.iommu: stage 2 translation
[ 1.142473] arm-smmu 5000000.iommu: nested translation
[ 1.147695] arm-smmu 5000000.iommu: stream matching with 128 register groups
[ 1.154831] arm-smmu 5000000.iommu: 64 context banks (0 stage-2 only)
[ 1.161359] arm-smmu 5000000.iommu: Supported page sizes: 0x61311000
[ 1.167798] arm-smmu 5000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA
[ 1.174236] arm-smmu 5000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA
[ 1.181221] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 1.187802] nvme 0002:01:00.0: Adding to iommu group 0
[ 1.193065] nvme nvme0: pci function 0002:01:00.0
[ 1.198595] libphy: Fixed MDIO Bus: probed
[ 1.203352] libphy: Freescale XGMAC MDIO Bus: probed
[ 1.210543] libphy: Freescale XGMAC MDIO Bus: probed
[ 1.210678] nvme nvme0: Shutdown timeout set to 10 seconds
[ 1.215892] libphy: Freescale XGMAC MDIO Bus: probed
[ 1.224624] nvme nvme0: 8/0/0 default/read/poll queues
[ 1.226344] libphy: Freescale XGMAC MDIO Bus: probed
[ 1.233447] Alternate GPT is invalid, using primary GPT.
[ 1.237015] libphy: Freescale XGMAC MDIO Bus: probed
[ 1.241424] nvme0n1: p1 p2 p128
[ 1.248046] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 1.255084] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 1.262826] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
[ 1.272245] xhci-hcd xhci-hcd.0.auto: irq 22, io mem 0x03100000
[ 1.278498] hub 1-0:1.0: USB hub found
[ 1.282254] hub 1-0:1.0: 1 port detected
[ 1.286331] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 1.291821] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 1.299479] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 1.306035] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.314338] hub 2-0:1.0: USB hub found
[ 1.318097] hub 2-0:1.0: 1 port detected
[ 1.322220] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1.327715] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 1.335444] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
[ 1.344858] xhci-hcd xhci-hcd.1.auto: irq 23, io mem 0x03110000
[ 1.351040] hub 3-0:1.0: USB hub found
[ 1.354805] hub 3-0:1.0: 1 port detected
[ 1.358865] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1.364355] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 1.372014] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 1.378565] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.386863] hub 4-0:1.0: USB hub found
[ 1.390622] hub 4-0:1.0: 1 port detected
[ 1.394775] usbcore: registered new interface driver usb-storage
[ 1.400830] i2c /dev entries driver
[ 1.410641] sp805-wdt c000000.wdt: registration successful
[ 1.416207] sp805-wdt c010000.wdt: registration successful
[ 1.421777] sp805-wdt c020000.wdt: registration successful
[ 1.427341] sp805-wdt c030000.wdt: registration successful
[ 1.432907] sp805-wdt c100000.wdt: registration successful
[ 1.438472] sp805-wdt c110000.wdt: registration successful
[ 1.444035] sp805-wdt c120000.wdt: registration successful
[ 1.449602] sp805-wdt c130000.wdt: registration successful
[ 1.455219] sdhci: Secure Digital Host Controller Interface driver
[ 1.461396] sdhci: Copyright(c) Pierre Ossman
[ 1.465748] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.471879] NET: Registered protocol family 10
[ 1.476709] Segment Routing with IPv6
[ 1.480400] NET: Registered protocol family 17
[ 1.484856] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.494428] mmc0: SDHCI controller on 2140000.esdhc [2140000.esdhc] using ADMA 64-bit
[ 1.497811] 8021q: 802.1Q VLAN Support v1.8
[ 1.509926] registered taskstats version 1
[ 1.515667] fsl_mc_dprc dprc.1: Adding to iommu group 1
[ 1.601980] fsl_mc_allocator dpbp.9: Adding to iommu group 1
[ 1.607745] fsl_mc_allocator dpbp.8: Adding to iommu group 1
[ 1.613504] fsl_mc_allocator dpbp.7: Adding to iommu group 1
[ 1.619258] fsl_mc_allocator dpbp.6: Adding to iommu group 1
[ 1.625016] fsl_mc_allocator dpbp.5: Adding to iommu group 1
[ 1.626424] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 1.630770] fsl_mc_allocator dpbp.4: Adding to iommu group 1
[ 1.642960] fsl_mc_allocator dpbp.3: Adding to iommu group 1
[ 1.648716] fsl_mc_allocator dpbp.2: Adding to iommu group 1
[ 1.654476] fsl_mc_allocator dpbp.1: Adding to iommu group 1
[ 1.660241] fsl_mc_allocator dpbp.0: Adding to iommu group 1
[ 1.667007] fsl_mc_allocator dpmcp.34: Adding to iommu group 1
[ 1.673441] fsl_mc_allocator dpmcp.33: Adding to iommu group 1
[ 1.679872] fsl_mc_allocator dpmcp.32: Adding to iommu group 1
[ 1.686304] fsl_mc_allocator dpmcp.31: Adding to iommu group 1
[ 1.692734] fsl_mc_allocator dpmcp.30: Adding to iommu group 1
[ 1.699169] fsl_mc_allocator dpmcp.29: Adding to iommu group 1
[ 1.705604] fsl_mc_allocator dpmcp.28: Adding to iommu group 1
[ 1.712034] fsl_mc_allocator dpmcp.27: Adding to iommu group 1
[ 1.718471] fsl_mc_allocator dpmcp.26: Adding to iommu group 1
[ 1.724903] fsl_mc_allocator dpmcp.25: Adding to iommu group 1
[ 1.731337] fsl_mc_allocator dpmcp.24: Adding to iommu group 1
[ 1.737781] fsl_mc_allocator dpmcp.23: Adding to iommu group 1
[ 1.744219] fsl_mc_allocator dpmcp.22: Adding to iommu group 1
[ 1.750657] fsl_mc_allocator dpmcp.21: Adding to iommu group 1
[ 1.757088] fsl_mc_allocator dpmcp.20: Adding to iommu group 1
[ 1.763522] fsl_mc_allocator dpmcp.19: Adding to iommu group 1
[ 1.769957] fsl_mc_allocator dpmcp.18: Adding to iommu group 1
[ 1.776391] fsl_mc_allocator dpmcp.17: Adding to iommu group 1
[ 1.782828] fsl_mc_allocator dpmcp.16: Adding to iommu group 1
[ 1.789265] fsl_mc_allocator dpmcp.15: Adding to iommu group 1
[ 1.795702] fsl_mc_allocator dpmcp.14: Adding to iommu group 1
[ 1.802137] fsl_mc_allocator dpmcp.13: Adding to iommu group 1
[ 1.808577] fsl_mc_allocator dpmcp.12: Adding to iommu group 1
[ 1.815015] fsl_mc_allocator dpmcp.11: Adding to iommu group 1
[ 1.821452] fsl_mc_allocator dpmcp.10: Adding to iommu group 1
[ 1.826640] hub 3-1:1.0: USB hub found
[ 1.827886] fsl_mc_allocator dpmcp.9: Adding to iommu group 1
[ 1.831057] hub 3-1:1.0: 4 ports detected
[ 1.837371] fsl_mc_allocator dpmcp.8: Adding to iommu group 1
[ 1.847117] fsl_mc_allocator dpmcp.7: Adding to iommu group 1
[ 1.853465] fsl_mc_allocator dpmcp.6: Adding to iommu group 1
[ 1.859814] fsl_mc_allocator dpmcp.5: Adding to iommu group 1
[ 1.866162] fsl_mc_allocator dpmcp.4: Adding to iommu group 1
[ 1.872514] fsl_mc_allocator dpmcp.3: Adding to iommu group 1
[ 1.878867] fsl_mc_allocator dpmcp.2: Adding to iommu group 1
[ 1.885219] fsl_mc_allocator dpmcp.1: Adding to iommu group 1
[ 1.891086] fsl_mc_allocator dpcon.72: Adding to iommu group 1
[ 1.897027] fsl_mc_allocator dpcon.71: Adding to iommu group 1
[ 1.902969] fsl_mc_allocator dpcon.70: Adding to iommu group 1
[ 1.908904] fsl_mc_allocator dpcon.69: Adding to iommu group 1
[ 1.914854] fsl_mc_allocator dpcon.68: Adding to iommu group 1
[ 1.918449] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 1.920790] fsl_mc_allocator dpcon.67: Adding to iommu group 1
[ 1.933661] fsl_mc_allocator dpcon.66: Adding to iommu group 1
[ 1.939599] fsl_mc_allocator dpcon.65: Adding to iommu group 1
[ 1.945539] fsl_mc_allocator dpcon.64: Adding to iommu group 1
[ 1.951482] fsl_mc_allocator dpcon.63: Adding to iommu group 1
[ 1.957421] fsl_mc_allocator dpcon.62: Adding to iommu group 1
[ 1.963358] fsl_mc_allocator dpcon.61: Adding to iommu group 1
[ 1.969295] fsl_mc_allocator dpcon.60: Adding to iommu group 1
[ 1.970635] hub 4-1:1.0: USB hub found
[ 1.975233] fsl_mc_allocator dpcon.59: Adding to iommu group 1
[ 1.978898] hub 4-1:1.0: 4 ports detected
[ 1.984805] fsl_mc_allocator dpcon.58: Adding to iommu group 1
[ 1.994641] fsl_mc_allocator dpcon.57: Adding to iommu group 1
[ 2.000582] fsl_mc_allocator dpcon.56: Adding to iommu group 1
[ 2.006524] fsl_mc_allocator dpcon.55: Adding to iommu group 1
[ 2.012464] fsl_mc_allocator dpcon.54: Adding to iommu group 1
[ 2.018403] fsl_mc_allocator dpcon.53: Adding to iommu group 1
[ 2.024348] fsl_mc_allocator dpcon.52: Adding to iommu group 1
[ 2.030286] fsl_mc_allocator dpcon.51: Adding to iommu group 1
[ 2.036226] fsl_mc_allocator dpcon.50: Adding to iommu group 1
[ 2.042166] fsl_mc_allocator dpcon.49: Adding to iommu group 1
[ 2.048106] fsl_mc_allocator dpcon.48: Adding to iommu group 1
[ 2.054049] fsl_mc_allocator dpcon.47: Adding to iommu group 1
[ 2.059988] fsl_mc_allocator dpcon.46: Adding to iommu group 1
[ 2.065929] fsl_mc_allocator dpcon.45: Adding to iommu group 1
[ 2.071868] fsl_mc_allocator dpcon.44: Adding to iommu group 1
[ 2.077810] fsl_mc_allocator dpcon.43: Adding to iommu group 1
[ 2.083751] fsl_mc_allocator dpcon.42: Adding to iommu group 1
[ 2.089695] fsl_mc_allocator dpcon.41: Adding to iommu group 1
[ 2.095634] fsl_mc_allocator dpcon.40: Adding to iommu group 1
[ 2.101576] fsl_mc_allocator dpcon.39: Adding to iommu group 1
[ 2.107517] fsl_mc_allocator dpcon.38: Adding to iommu group 1
[ 2.113467] fsl_mc_allocator dpcon.37: Adding to iommu group 1
[ 2.119411] fsl_mc_allocator dpcon.36: Adding to iommu group 1
[ 2.125352] fsl_mc_allocator dpcon.35: Adding to iommu group 1
[ 2.131297] fsl_mc_allocator dpcon.34: Adding to iommu group 1
[ 2.137238] fsl_mc_allocator dpcon.33: Adding to iommu group 1
[ 2.143182] fsl_mc_allocator dpcon.32: Adding to iommu group 1
[ 2.149127] fsl_mc_allocator dpcon.31: Adding to iommu group 1
[ 2.155075] fsl_mc_allocator dpcon.30: Adding to iommu group 1
[ 2.161015] fsl_mc_allocator dpcon.29: Adding to iommu group 1
[ 2.166964] fsl_mc_allocator dpcon.28: Adding to iommu group 1
[ 2.172908] fsl_mc_allocator dpcon.27: Adding to iommu group 1
[ 2.178858] fsl_mc_allocator dpcon.26: Adding to iommu group 1
[ 2.184804] fsl_mc_allocator dpcon.25: Adding to iommu group 1
[ 2.190747] fsl_mc_allocator dpcon.24: Adding to iommu group 1
[ 2.196694] fsl_mc_allocator dpcon.23: Adding to iommu group 1
[ 2.202638] fsl_mc_allocator dpcon.22: Adding to iommu group 1
[ 2.208583] fsl_mc_allocator dpcon.21: Adding to iommu group 1
[ 2.214533] fsl_mc_allocator dpcon.20: Adding to iommu group 1
[ 2.220479] fsl_mc_allocator dpcon.19: Adding to iommu group 1
[ 2.226431] fsl_mc_allocator dpcon.18: Adding to iommu group 1
[ 2.232374] fsl_mc_allocator dpcon.17: Adding to iommu group 1
[ 2.238320] fsl_mc_allocator dpcon.16: Adding to iommu group 1
[ 2.244266] fsl_mc_allocator dpcon.15: Adding to iommu group 1
[ 2.250215] fsl_mc_allocator dpcon.14: Adding to iommu group 1
[ 2.256157] fsl_mc_allocator dpcon.13: Adding to iommu group 1
[ 2.262103] fsl_mc_allocator dpcon.12: Adding to iommu group 1
[ 2.268047] fsl_mc_allocator dpcon.11: Adding to iommu group 1
[ 2.273995] fsl_mc_allocator dpcon.10: Adding to iommu group 1
[ 2.279946] fsl_mc_allocator dpcon.9: Adding to iommu group 1
[ 2.285804] fsl_mc_allocator dpcon.8: Adding to iommu group 1
[ 2.291665] fsl_mc_allocator dpcon.7: Adding to iommu group 1
[ 2.297522] fsl_mc_allocator dpcon.6: Adding to iommu group 1
[ 2.303385] fsl_mc_allocator dpcon.5: Adding to iommu group 1
[ 2.309245] fsl_mc_allocator dpcon.4: Adding to iommu group 1
[ 2.315107] fsl_mc_allocator dpcon.3: Adding to iommu group 1
[ 2.320968] fsl_mc_allocator dpcon.2: Adding to iommu group 1
[ 2.326830] fsl_mc_allocator dpcon.1: Adding to iommu group 1
[ 2.332695] fsl_mc_allocator dpcon.0: Adding to iommu group 1
[ 2.338563] fsl_dpaa2_eth dpni.9: Adding to iommu group 1
[ 2.383371] fsl_dpaa2_eth dpni.8: Adding to iommu group 1
[ 2.428137] fsl_dpaa2_eth dpni.7: Adding to iommu group 1
[ 2.472895] fsl_dpaa2_eth dpni.6: Adding to iommu group 1
[ 2.517647] fsl_dpaa2_eth dpni.5: Adding to iommu group 1
[ 2.562386] fsl_dpaa2_eth dpni.4: Adding to iommu group 1
[ 2.607137] fsl_dpaa2_eth dpni.3: Adding to iommu group 1
[ 2.651899] fsl_dpaa2_eth dpni.2: Adding to iommu group 1
[ 2.696673] fsl_dpaa2_eth dpni.1: Adding to iommu group 1
[ 2.741424] fsl_dpaa2_eth dpni.0: Adding to iommu group 1
[ 2.787700] fsl_mc_dpio dpio.8: Adding to iommu group 1
[ 2.796503] fsl_mc_dpio dpio.8: probed
[ 2.801910] fsl_mc_dpio dpio.7: Adding to iommu group 1
[ 2.810753] fsl_mc_dpio dpio.7: probed
[ 2.816138] fsl_mc_dpio dpio.6: Adding to iommu group 1
[ 2.824973] fsl_mc_dpio dpio.6: probed
[ 2.830353] fsl_mc_dpio dpio.5: Adding to iommu group 1
[ 2.838950] fsl_mc_dpio dpio.5: probed
[ 2.844331] fsl_mc_dpio dpio.4: Adding to iommu group 1
[ 2.852968] fsl_mc_dpio dpio.4: probed
[ 2.858347] fsl_mc_dpio dpio.3: Adding to iommu group 1
[ 2.866951] fsl_mc_dpio dpio.3: probed
[ 2.872330] fsl_mc_dpio dpio.2: Adding to iommu group 1
[ 2.880967] fsl_mc_dpio dpio.2: probed
[ 2.886347] fsl_mc_dpio dpio.1: Adding to iommu group 1
[ 2.894952] fsl_mc_dpio dpio.1: probed
[ 2.902308] fsl_mc_dprc dprc.1: DPRC device bound to driver
[ 2.907986] pcieport 0000:00:00.0: Adding to iommu group 2
[ 2.913597] pcieport 0000:00:00.0: PME: Signaling with IRQ 371
[ 2.919596] pcieport 0001:00:00.0: Adding to iommu group 3
[ 2.925170] pcieport 0001:00:00.0: PME: Signaling with IRQ 372
[ 2.931144] pcieport 0001:01:00.0: Adding to iommu group 3
[ 2.936991] pcieport 0001:02:01.0: Adding to iommu group 3
[ 2.943176] pcieport 0001:02:02.0: Adding to iommu group 3
[ 2.949360] pcieport 0002:00:00.0: Adding to iommu group 4
[ 2.954916] pcieport 0002:00:00.0: PME: Signaling with IRQ 105
[ 3.001572] fsl_dpaa2_eth dpni.9 (unnamed net_device) (uninitialized): PHY [0x0000000008b96000:1c] driver [Generic PHY] (irq=POLL)
[ 3.013769] fsl_dpaa2_eth dpni.9: Probed interface eth0
[ 3.059715] fsl_dpaa2_eth dpni.8 (unnamed net_device) (uninitialized): PHY [0x0000000008b96000:1d] driver [Generic PHY] (irq=POLL)
[ 3.071848] fsl_dpaa2_eth dpni.8: Probed interface eth1
[ 3.118262] fsl_dpaa2_eth dpni.7 (unnamed net_device) (uninitialized): PHY [0x0000000008b96000:1e] driver [Generic PHY] (irq=POLL)
[ 3.130373] fsl_dpaa2_eth dpni.7: Probed interface eth2
[ 3.176529] fsl_dpaa2_eth dpni.6 (unnamed net_device) (uninitialized): PHY [0x0000000008b96000:1f] driver [Generic PHY] (irq=POLL)
[ 3.188651] fsl_dpaa2_eth dpni.6: Probed interface eth3
[ 3.234567] fsl_dpaa2_eth dpni.5 (unnamed net_device) (uninitialized): PHY [0x0000000008b96000:0c] driver [Generic PHY] (irq=POLL)
[ 3.246686] fsl_dpaa2_eth dpni.5: Probed interface eth4
[ 3.292603] fsl_dpaa2_eth dpni.4 (unnamed net_device) (uninitialized): PHY [0x0000000008b96000:0d] driver [Generic PHY] (irq=POLL)
[ 3.304717] fsl_dpaa2_eth dpni.4: Probed interface eth5
[ 3.350646] fsl_dpaa2_eth dpni.3 (unnamed net_device) (uninitialized): PHY [0x0000000008b96000:0e] driver [Generic PHY] (irq=POLL)
[ 3.362766] fsl_dpaa2_eth dpni.3: Probed interface eth6
[ 3.408672] fsl_dpaa2_eth dpni.2 (unnamed net_device) (uninitialized): PHY [0x0000000008b96000:0f] driver [Generic PHY] (irq=POLL)
[ 3.420797] fsl_dpaa2_eth dpni.2: Probed interface eth7
[ 3.466897] fsl_dpaa2_eth dpni.1: Probed interface eth8
[ 3.512981] fsl_dpaa2_eth dpni.0: Probed interface eth9
[ 3.526673] EXT4-fs (nvme0n1p2): mounted filesystem without journal. Opts: (null)
[ 3.534174] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
[ 3.541146] Freeing unused kernel memory: 896K
[ 3.590463] Run /sbin/init as init process
[ 3.600421] init: Console is alive
[ 3.603885] init: - watchdog -
[ 3.621396] random: fast init done
[ 3.632381] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.644473] Button Hotplug driver version 0.4.1
[ 3.660516] tpm tpm0: starting up the TPM manually
[ 3.750288] rtc-rx8025 1-0032: Type RX-8035
[ 3.756968] rtc-rx8025 1-0032: registered as rtc0
[ 3.763441] rtc-rx8025 1-0032: setting system clock to 2021-06-22T06:49:13 UTC (1624344553)
[ 3.773385] input: buttons as /devices/platform/buttons/input/input0
[ 3.780564] usbcore: registered new interface driver uas
[ 3.785954] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 3.798266] init: - preinit -
[ 3.847146] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.857015] random: jshn: uninitialized urandom read (4 bytes read)
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 6.890207] mount_root: mounting /dev/root
[ 6.898975] EXT4-fs (nvme0n1p2): re-mounted. Opts: (null)
[ 6.904428] mount_root: loading kmods from internal overlay
[ 6.919257] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 6.926791] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 6.944674] block: attempting to load /etc/config/fstab
[ 6.950218] block: extroot: not configured
[ 6.979679] random: procd: uninitialized urandom read (4 bytes read)
[ 7.001875] urandom-seed: Seeding with /etc/urandom.seed
[ 7.011452] procd: - early -
[ 7.014350] procd: - watchdog -
[ 7.533370] procd: - watchdog -
[ 7.536634] procd: - ubus -
[ 7.542452] random: ubusd: uninitialized urandom read (4 bytes read)
[ 7.589396] random: ubusd: uninitialized urandom read (4 bytes read)
[ 7.596617] procd: - init -
Please press Enter to activate this console.
[ 7.664039] urngd: v1.0.2 started.
[ 7.669289] kmodloader: loading kernel modules from /etc/modules.d/*
[ 7.679538] caam 8000000.crypto: device ID = 0x0a13030000000000 (Era 8)
[ 7.686165] caam 8000000.crypto: job rings = 3, qi = 1
[ 7.686779] random: crng init done
[ 7.694708] random: 5 urandom warning(s) missed due to ratelimiting
[ 7.707902] caam algorithms registered in /proc/crypto
[ 7.713863] caam 8000000.crypto: caam pkc algorithms registered in /proc/crypto
[ 7.721174] caam 8000000.crypto: registering rng-caam
[ 7.729174] dpaa2_caam dpseci.0: Adding to iommu group 1
[ 7.736151] dpaa2_caam dpseci.0: dpseci v5.3
[ 7.752945] fsl_mc_dprc dprc.1 (unnamed net_device) (uninitialized): netif_napi_add() called with weight 512
[ 7.771599] dpaa2_caam dpseci.0: algorithms registered in /proc/crypto
[ 7.778894] dpaa2_caam dpseci.0: hash algorithms registered in /proc/crypto
[ 7.820506] tun: Universal TUN/TAP device driver, 1.6
[ 7.833604] i2c i2c-2: Added multiplexed i2c bus 3
[ 7.838586] i2c i2c-2: Added multiplexed i2c bus 4
[ 7.843388] pca954x 2-0070: registered 2 multiplexed busses for I2C mux pca9540
[ 7.851582] pca953x 0-0076: using no AI
[ 7.858196] gpio-381 (admin_led_lower): hogged as output/low
[ 7.868657] emc2301 0-002f: EMC2301 detected
[ 7.872938] emc2301 0-002f: Have 1 fans configured in DT
[ 7.878251] emc2301 0-002f: Fan 0 Cooling step is 312 RPM, minimum 3000, max 5500 RPM
[ 7.888134] emc2301 0-002f: registering a cooling device
[ 7.896777] GACT probability on
[ 7.900222] Mirror/redirect action on
[ 7.905940] u32 classifier
[ 7.908649] input device check on
[ 7.912307] Actions configured
[ 7.921954] usbcore: registered new interface driver cdc_wdm
[ 7.928008] Loading modules backported from Linux version v5.10.42-0-g65859eca4dff
[ 7.935578] Backport generated by backports.git v5.10.42-1-0-gbee5c545
[ 7.947935] libphy: SFP I2C Bus: probed
[ 7.953272] sfp dpmac2_sfp: Host maximum power 2.0W
[ 7.961142] libphy: SFP I2C Bus: probed
[ 7.966445] sfp dpmac1_sfp: Host maximum power 2.0W
[ 7.975666] usbcore: registered new device driver usbip-host
[ 7.983656] usbcore: registered new interface driver usbserial_generic
[ 7.990216] usbserial: USB Serial support registered for generic
[ 7.996898] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller
[ 8.002823] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 5
[ 8.010061] vhci_hcd: created sysfs vhci_hcd.0
[ 8.014753] hub 5-0:1.0: USB hub found
[ 8.018519] hub 5-0:1.0: 8 ports detected
[ 8.022941] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller
[ 8.028877] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 6
[ 8.036168] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 8.044557] hub 6-0:1.0: USB hub found
[ 8.048336] hub 6-0:1.0: 8 ports detected
[ 8.057283] xt_time: kernel timezone is -0000
[ 8.062552] usbcore: registered new interface driver asix
[ 8.068716] usbcore: registered new interface driver cdc_ether
[ 8.075630] usbcore: registered new interface driver cdc_ncm
[ 8.089606] usbcore: registered new interface driver ftdi_sio
[ 8.095389] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 8.107454] Intel(R) Wireless WiFi driver for Linux
[ 8.133842] PPP generic driver version 2.4.2
[ 8.138682] NET: Registered protocol family 24
[ 8.143764] usbcore: registered new interface driver qmi_wwan
[ 8.150168] usbcore: registered new interface driver rndis_host
[ 8.157931] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 8.165771] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 8.192200] usbcore: registered new interface driver cdc_mbim
[ 8.205951] usbcore: registered new interface driver option
[ 8.211571] usbserial: USB Serial support registered for GSM modem (1-port)
[ 8.220091] usbcore: registered new interface driver qcserial
[ 8.225868] usbserial: USB Serial support registered for Qualcomm USB modem
[ 8.236633] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 10.277520] fsl_dpaa2_eth dpni.9 eth0: configuring for inband/qsgmii link mode
[ 10.296185] br-lan: port 1(eth0) entered blocking state
[ 10.301442] br-lan: port 1(eth0) entered disabled state
[ 10.308855] device eth0 entered promiscuous mode
[ 10.319603] fsl_dpaa2_eth dpni.8 eth1: configuring for inband/qsgmii link mode
BusyBox v1.33.1 (2021-06-17 07:42:32 UTC) built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt 21.02-SNAPSHOT, r0-ab0210e
-----------------------------------------------------
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
root@OpenWrt:/#
Fimware v0.8.5 + Debian-sid (debian kernel)¶
*** U-Boot Boot Menu ***
Normal boot
Built-in recovery
Boot from NVMe
Boot from USB
Boot from SD
Boot OpenWrt from NAND
Boot from network
Boot from SATA
U-Boot console
Press UP/DOWN to move, ENTER to select
Device 0: Vendor: 0x144d Rev: GXA7301Q Prod: S674NE0NC02476
Type: Hard Disk
Capacity: 244198.3 MB = 238.4 GB (500118192 x 512)
... is now current device
Scanning nvme 0:f...
** Unable to read file / **
Found EFI removable media binary efi/boot/bootaa64.efi
device 0 offset 0x580000, size 0x40000
SF: 262144 bytes @ 0x580000 Read: OK
device 0 offset 0x600000, size 0x40000
SF: 262144 bytes @ 0x600000 Read: OK
TEN64 ft_board_setup start, blob 0000000090000000
INFO: RNG Desc SUCCESS with status 0
INFO: result ccbc63a647e08f72
TEN64 ft_board_setup end
Card did not respond to voltage select!
mmc_init: -95, time 19
Scanning disk esdhc@2140000.blk...
Disk esdhc@2140000.blk not ready
Scanning disk nvme#0.blk#0...
** Unrecognized filesystem type **
Found 4 disks
TEN64 ft_board_setup start, blob 0000000087f00000
TEN64 ft_board_setup already run, not doing anything
BootOrder not defined
EFI boot manager: Cannot load any image
147456 bytes read in 1 ms (140.6 MiB/s)
TEN64 ft_board_setup start, blob 0000000087ee7000
TEN64 ft_board_setup already run, not doing anything
Welcome to GRUB!
error: no suitable video mode found.
GNU GRUB version 2.04-18
┌────────────────────────────────────────────────────────────────────────────┐
│*Debian GNU/Linux │
│ Advanced options for Debian GNU/Linux │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
└────────────────────────────────────────────────────────────────────────────┘
Use the ▲ and ▼ keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands
before booting or `c' for a command-line.
The highlighted entry will be executed automatically in 0s.
Booting `Debian GNU/Linux'
Loading Linux 5.10.0-7-arm64 ...
Loading initial ramdisk ...
EFI stub: Booting Linux Kernel...
EFI stub: EFI_RNG_PROTOCOL unavailable, KASLR will be disabled
EFI stub: ERROR: Could not determine UEFI Secure Boot status.
EFI stub: Using DTB from configuration table
EFI stub: Exiting boot services and installing virtual address map...
EFI stub: ERROR: Could not determine UEFI Secure Boot status.
fsl-mc: Deploying data path layout ... SUCCESS
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.10.0-7-arm64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.40-1 (2021-05-28)
[ 0.000000] Machine model: Traverse Ten64
[ 0.000000] efi: EFI v2.80 by Das U-Boot
[ 0.000000] efi: RTPROP=0x83dfff7040 SMBIOS=0xf69c6000 MEMRESERVE=0x8378ad4040
[ 0.000000] secureboot: Secure boot could not be determined (mode 1)
[ 0.000000] earlycon: ns16550a0 at MMIO 0x00000000021c0500 (options '115200n8')
[ 0.000000] printk: bootconsole [ns16550a0] enabled
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000083dfffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x83de0e3b00-0x83de0e5fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000083dfffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x00000000f69c5fff]
[ 0.000000] node 0: [mem 0x00000000f69c6000-0x00000000f69c6fff]
[ 0.000000] node 0: [mem 0x00000000f69c7000-0x00000000fbcbffff]
[ 0.000000] node 0: [mem 0x00000000fbcc0000-0x00000000fbccffff]
[ 0.000000] node 0: [mem 0x00000000fbcd0000-0x00000000fbdfffff]
[ 0.000000] node 0: [mem 0x0000008080000000-0x00000083dffc1fff]
[ 0.000000] node 0: [mem 0x00000083dffc2000-0x00000083dffc3fff]
[ 0.000000] node 0: [mem 0x00000083dffc4000-0x00000083dffeafff]
[ 0.000000] node 0: [mem 0x00000083dffeb000-0x00000083dffeffff]
[ 0.000000] node 0: [mem 0x00000083dfff0000-0x00000083dfff2fff]
[ 0.000000] node 0: [mem 0x00000083dfff3000-0x00000083dfff3fff]
[ 0.000000] node 0: [mem 0x00000083dfff4000-0x00000083dfff6fff]
[ 0.000000] node 0: [mem 0x00000083dfff7000-0x00000083dfffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000083dfffffff]
[ 0.000000] cma: Reserved 64 MiB at 0x00000000f7c00000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 33 pages/cpu s95192 r8192 d31784 u135168
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3982848
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-7-arm64 root=/dev/nvme0n1p1 ro console=ttyS0,115200 earlycon arm-smmu.disable_bypass=0 net.ifnames=0
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x00000000f0f3c000-0x00000000f4f3c000] (64MB)
[ 0.000000] Memory: 2919828K/16185344K available (11776K kernel code, 2436K rwdata, 7008K rodata, 5440K init, 598K bss, 440248K reserved, 65536K cma-reserved)
[ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x560 with crng_init=0
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] ftrace: allocating 38529 entries in 151 pages
[ 0.000000] ftrace: allocated 151 pages with 5 groups
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 256 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000006100000
[ 0.000000] ITS [mem 0x06020000-0x0603ffff]
[ 0.000000] ITS@0x0000000006020000: allocated 65536 Devices @8080200000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x0000008080190000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000080801a0000
[ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c409fb33, max_idle_ns: 440795203156 ns
[ 0.000002] sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 4398046511103ns
[ 0.008329] Console: colour dummy device 80x25
[ 0.012861] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000)
[ 0.023282] pid_max: default: 32768 minimum: 301
[ 0.028012] LSM: Security Framework initializing
[ 0.032671] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.039383] AppArmor: AppArmor initialized
[ 0.043504] TOMOYO Linux initialized
[ 0.047167] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.054820] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.064065] rcu: Hierarchical SRCU implementation.
[ 0.069450] Platform MSI: gic-its@6020000 domain created
[ 0.074863] PCI/MSI: /interrupt-controller@6000000/gic-its@6020000 domain created
[ 0.082436] fsl-mc MSI: gic-its@6020000 domain created
[ 0.088003] Remapping and enabling EFI services.
[ 0.092985] smp: Bringing up secondary CPUs ...
[ 0.097896] Detected VIPT I-cache on CPU1
[ 0.097917] GICv3: CPU1: found redistributor 1 region 0:0x0000000006120000
[ 0.097947] GICv3: CPU1: using allocated LPI pending table @0x00000080801b0000
[ 0.097980] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.098374] Detected VIPT I-cache on CPU2
[ 0.098387] GICv3: CPU2: found redistributor 2 region 0:0x0000000006140000
[ 0.098414] GICv3: CPU2: using allocated LPI pending table @0x00000080801c0000
[ 0.098436] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.098817] Detected VIPT I-cache on CPU3
[ 0.098830] GICv3: CPU3: found redistributor 3 region 0:0x0000000006160000
[ 0.098858] GICv3: CPU3: using allocated LPI pending table @0x00000080801d0000
[ 0.098877] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.099256] Detected VIPT I-cache on CPU4
[ 0.099276] GICv3: CPU4: found redistributor 100 region 0:0x0000000006180000
[ 0.099315] GICv3: CPU4: using allocated LPI pending table @0x00000080801e0000
[ 0.099347] CPU4: Booted secondary processor 0x0000000100 [0x410fd034]
[ 0.099774] Detected VIPT I-cache on CPU5
[ 0.099788] GICv3: CPU5: found redistributor 101 region 0:0x00000000061a0000
[ 0.099819] GICv3: CPU5: using allocated LPI pending table @0x00000080801f0000
[ 0.099839] CPU5: Booted secondary processor 0x0000000101 [0x410fd034]
[ 0.100232] Detected VIPT I-cache on CPU6
[ 0.100247] GICv3: CPU6: found redistributor 102 region 0:0x00000000061c0000
[ 0.100276] GICv3: CPU6: using allocated LPI pending table @0x0000008080280000
[ 0.100296] CPU6: Booted secondary processor 0x0000000102 [0x410fd034]
[ 0.100699] Detected VIPT I-cache on CPU7
[ 0.100714] GICv3: CPU7: found redistributor 103 region 0:0x00000000061e0000
[ 0.100744] GICv3: CPU7: using allocated LPI pending table @0x0000008080290000
[ 0.100764] CPU7: Booted secondary processor 0x0000000103 [0x410fd034]
[ 0.100831] smp: Brought up 1 node, 8 CPUs
[ 0.279058] SMP: Total of 8 processors activated.
[ 0.283789] CPU features: detected: 32-bit EL0 Support
[ 0.288959] CPU features: detected: CRC32 instructions
[ 0.294127] CPU features: detected: 32-bit EL1 Support
[ 0.307565] CPU: All CPU(s) started at EL2
[ 0.311723] alternatives: patching kernel code
[ 0.890698] node 0 deferred pages initialised in 572ms
[ 0.896660] devtmpfs: initialized
[ 0.903710] Registered cp15_barrier emulation handler
[ 0.908802] Registered setend emulation handler
[ 0.913362] KASLR enabled
[ 0.916110] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.925940] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.934705] pinctrl core: initialized pinctrl subsystem
[ 0.940428] SMBIOS 3.0 present.
[ 0.943590] DMI: traverse ten64/ten64, BIOS 2020.07-rc1-gb47b96d4 06/22/2021
[ 0.951043] NET: Registered protocol family 16
[ 0.956667] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.964295] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.972908] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.980982] audit: initializing netlink subsys (disabled)
[ 0.986762] audit: type=2000 audit(0.832:1): state=initialized audit_enabled=0 res=1
[ 0.987365] thermal_sys: Registered thermal governor 'fair_share'
[ 0.994561] thermal_sys: Registered thermal governor 'bang_bang'
[ 1.000693] thermal_sys: Registered thermal governor 'step_wise'
[ 1.006736] thermal_sys: Registered thermal governor 'user_space'
[ 1.012779] thermal_sys: Registered thermal governor 'power_allocator'
[ 1.019115] cpuidle: using governor ladder
[ 1.029812] cpuidle: using governor menu
[ 1.033864] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 1.040812] ASID allocator initialised with 32768 entries
[ 1.046484] Serial: AMBA PL011 UART driver
[ 1.058882] Machine: Traverse Ten64
[ 1.062385] SoC family: QorIQ LS1088A
[ 1.066069] SoC ID: svr:0x87030010, Revision: 1.0
[ 1.072826] fsl_mc_bus 80c000000.fsl-mc: MC firmware version: 10.20.4
[ 1.081876] fsl_mc_dprc dprc.1: DMA mask not set
[ 1.090569] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 1.097322] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 1.104066] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 1.110810] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 1.537875] ACPI: Interpreter disabled.
[ 1.541880] iommu: Default domain type: Translated
[ 1.546896] vgaarb: loaded
[ 1.549834] EDAC MC: Ver: 3.0.0
[ 1.553786] NetLabel: Initializing
[ 1.557220] NetLabel: domain hash size = 128
[ 1.561600] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 1.567335] NetLabel: unlabeled traffic allowed by default
[ 1.573137] clocksource: Switched to clocksource arch_sys_counter
[ 1.622936] VFS: Disk quotas dquot_6.6.0
[ 1.626924] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.634299] AppArmor: AppArmor Filesystem Enabled
[ 1.639155] pnp: PnP ACPI: disabled
[ 1.647216] NET: Registered protocol family 2
[ 1.651919] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 1.663820] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 1.672767] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 1.681636] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 1.689659] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.696449] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 1.703523] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 1.711103] NET: Registered protocol family 1
[ 1.715503] NET: Registered protocol family 44
[ 1.719977] PCI: CLS 0 bytes, default 64
[ 1.724064] Trying to unpack rootfs image as initramfs...
[ 2.618876] Freeing initrd memory: 27172K
[ 2.623600] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 2.631587] kvm [1]: IPA Size Limit: 40 bits
[ 2.636786] kvm [1]: vgic-v2@c0e0000
[ 2.640392] kvm [1]: GIC system register CPU interface enabled
[ 2.646385] kvm [1]: vgic interrupt IRQ9
[ 2.650488] kvm [1]: Hyp mode initialized successfully
[ 2.656747] Initialise system trusted keyrings
[ 2.661245] Key type blacklist registered
[ 2.665400] workingset: timestamp_bits=42 max_order=22 bucket_order=0
[ 2.675541] zbud: loaded
[ 2.678518] integrity: Platform Keyring initialized
[ 2.683431] Key type asymmetric registered
[ 2.687554] Asymmetric key parser 'x509' registered
[ 2.692478] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 2.700018] io scheduler mq-deadline registered
[ 2.706824] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.713934] layerscape-pcie 3400000.pcie: host bridge /soc/pcie@3400000 ranges:
[ 2.721307] layerscape-pcie 3400000.pcie: IO 0x2000010000..0x200001ffff -> 0x0000000000
[ 2.729897] layerscape-pcie 3400000.pcie: MEM 0x2040000000..0x207fffffff -> 0x0040000000
[ 2.738596] layerscape-pcie 3400000.pcie: PCI host bridge to bus 0000:00
[ 2.745345] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.750867] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 2.757088] pci_bus 0000:00: root bus resource [mem 0x2040000000-0x207fffffff] (bus address [0x40000000-0x7fffffff])
[ 2.767699] pci 0000:00:00.0: [1957:80c0] type 01 class 0x060400
[ 2.773795] pci 0000:00:00.0: supports D1 D2
[ 2.778091] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
[ 2.785832] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 2.791264] layerscape-pcie 3500000.pcie: host bridge /soc/pcie@3500000 ranges:
[ 2.798660] layerscape-pcie 3500000.pcie: IO 0x2800010000..0x280001ffff -> 0x0000000000
[ 2.807264] layerscape-pcie 3500000.pcie: MEM 0x2840000000..0x287fffffff -> 0x0040000000
[ 2.815943] layerscape-pcie 3500000.pcie: PCI host bridge to bus 0001:00
[ 2.822691] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 2.828214] pci_bus 0001:00: root bus resource [io 0x10000-0x1ffff] (bus address [0x0000-0xffff])
[ 2.837236] pci_bus 0001:00: root bus resource [mem 0x2840000000-0x287fffffff] (bus address [0x40000000-0x7fffffff])
[ 2.847843] pci 0001:00:00.0: [1957:80c0] type 01 class 0x060400
[ 2.853924] pci 0001:00:00.0: supports D1 D2
[ 2.858222] pci 0001:00:00.0: PME# supported from D0 D1 D2 D3hot
[ 2.865230] pci 0001:01:00.0: [12d8:b304] type 01 class 0x060400
[ 2.871654] pci 0001:01:00.0: supports D1 D2
[ 2.875950] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.882787] pci 0001:01:00.0: PTM enabled (root), unknown granularity
[ 2.889329] pci 0001:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0001:00:00.0 (capable of 8.000 Gb/s with 5.0 GT/s PCIe x2 link)
[ 2.914128] pci 0001:02:01.0: [12d8:b304] type 01 class 0x060400
[ 2.920560] pci 0001:02:01.0: supports D1 D2
[ 2.924858] pci 0001:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.931913] pci 0001:02:02.0: [12d8:b304] type 01 class 0x060400
[ 2.938344] pci 0001:02:02.0: supports D1 D2
[ 2.942641] pci 0001:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.952140] pci 0001:02:01.0: PCI bridge to [bus 03]
[ 2.957169] pci 0001:02:02.0: PCI bridge to [bus 04]
[ 2.962195] pci 0001:01:00.0: PCI bridge to [bus 02-04]
[ 2.967482] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 2.973019] layerscape-pcie 3600000.pcie: host bridge /soc/pcie@3600000 ranges:
[ 2.980405] layerscape-pcie 3600000.pcie: IO 0x3000010000..0x300001ffff -> 0x0000000000
[ 2.989007] layerscape-pcie 3600000.pcie: MEM 0x3040000000..0x307fffffff -> 0x0040000000
[ 2.997684] layerscape-pcie 3600000.pcie: PCI host bridge to bus 0002:00
[ 3.004433] pci_bus 0002:00: root bus resource [bus 00-ff]
[ 3.009954] pci_bus 0002:00: root bus resource [io 0x20000-0x2ffff] (bus address [0x0000-0xffff])
[ 3.018990] pci_bus 0002:00: root bus resource [mem 0x3040000000-0x307fffffff] (bus address [0x40000000-0x7fffffff])
[ 3.029597] pci 0002:00:00.0: [1957:80c0] type 01 class 0x060400
[ 3.035676] pci 0002:00:00.0: supports D1 D2
[ 3.039973] pci 0002:00:00.0: PME# supported from D0 D1 D2 D3hot
[ 3.046968] pci 0002:01:00.0: [144d:a80a] type 00 class 0x010802
[ 3.053070] pci 0002:01:00.0: reg 0x10: [mem 0x3040000000-0x3040003fff 64bit]
[ 3.060827] pci 0002:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0002:00:00.0 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link)
[ 3.076897] pci 0002:00:00.0: BAR 14: assigned [mem 0x3040000000-0x30400fffff]
[ 3.084172] pci 0002:01:00.0: BAR 0: assigned [mem 0x3040000000-0x3040003fff 64bit]
[ 3.091904] pci 0002:00:00.0: PCI bridge to [bus 01-ff]
[ 3.097164] pci 0002:00:00.0: bridge window [mem 0x3040000000-0x30400fffff]
[ 3.107533] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.114992] printk: console [ttyS0] disabled
[ 3.119335] 21c0500.serial: ttyS0 at MMIO 0x21c0500 (irq = 16, base_baud = 21875000) is a 16550A
[ 3.128216] printk: console [ttyS0] enabled
[ 3.128216] printk: console [ttyS0] enabled
[ 3.136611] printk: bootconsole [ns16550a0] disabled
[ 3.136611] printk: bootconsole [ns16550a0] disabled
[ 3.147052] 21c0600.serial: ttyS1 at MMIO 0x21c0600 (irq = 16, base_baud = 21875000) is a 16550A
[ 3.156118] Serial: AMBA driver
[ 3.159494] msm_serial: driver initialized
[ 3.164314] arm-smmu 5000000.iommu: probing hardware configuration...
[ 3.170757] arm-smmu 5000000.iommu: SMMUv2 with:
[ 3.175372] arm-smmu 5000000.iommu: stage 1 translation
[ 3.180682] arm-smmu 5000000.iommu: stage 2 translation
[ 3.185991] arm-smmu 5000000.iommu: nested translation
[ 3.191217] arm-smmu 5000000.iommu: stream matching with 128 register groups
[ 3.198354] arm-smmu 5000000.iommu: 64 context banks (0 stage-2 only)
[ 3.204882] arm-smmu 5000000.iommu: Supported page sizes: 0x61311000
[ 3.211322] arm-smmu 5000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA
[ 3.217761] arm-smmu 5000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA
[ 3.224814] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 3.231305] mousedev: PS/2 mouse device common for all mice
[ 3.237804] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.244806] NET: Registered protocol family 10
[ 3.270786] Segment Routing with IPv6
[ 3.274530] mip6: Mobile IPv6
[ 3.277504] NET: Registered protocol family 17
[ 3.282025] mpls_gso: MPLS GSO support
[ 3.286069] registered taskstats version 1
[ 3.290183] Loading compiled-in X.509 certificates
[ 3.390198] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 3.398933] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c'
[ 3.409207] zswap: loaded using pool lzo/zbud
[ 3.413829] Key type ._fscrypt registered
[ 3.417839] Key type .fscrypt registered
[ 3.421760] Key type fscrypt-provisioning registered
[ 3.426824] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.434796] fsl_mc_dprc dprc.1: Adding to iommu group 0
[ 3.520612] fsl_mc_allocator dpbp.9: Adding to iommu group 0
[ 3.526393] fsl_mc_allocator dpbp.8: Adding to iommu group 0
[ 3.532171] fsl_mc_allocator dpbp.7: Adding to iommu group 0
[ 3.537942] fsl_mc_allocator dpbp.6: Adding to iommu group 0
[ 3.543718] fsl_mc_allocator dpbp.5: Adding to iommu group 0
[ 3.549494] fsl_mc_allocator dpbp.4: Adding to iommu group 0
[ 3.555284] fsl_mc_allocator dpbp.3: Adding to iommu group 0
[ 3.561054] fsl_mc_allocator dpbp.2: Adding to iommu group 0
[ 3.566830] fsl_mc_allocator dpbp.1: Adding to iommu group 0
[ 3.572602] fsl_mc_allocator dpbp.0: Adding to iommu group 0
[ 3.579385] fsl_mc_allocator dpmcp.34: Adding to iommu group 0
[ 3.585834] fsl_mc_allocator dpmcp.33: Adding to iommu group 0
[ 3.592291] fsl_mc_allocator dpmcp.32: Adding to iommu group 0
[ 3.598741] fsl_mc_allocator dpmcp.31: Adding to iommu group 0
[ 3.605197] fsl_mc_allocator dpmcp.30: Adding to iommu group 0
[ 3.611656] fsl_mc_allocator dpmcp.29: Adding to iommu group 0
[ 3.618106] fsl_mc_allocator dpmcp.28: Adding to iommu group 0
[ 3.624557] fsl_mc_allocator dpmcp.27: Adding to iommu group 0
[ 3.631012] fsl_mc_allocator dpmcp.26: Adding to iommu group 0
[ 3.637471] fsl_mc_allocator dpmcp.25: Adding to iommu group 0
[ 3.643923] fsl_mc_allocator dpmcp.24: Adding to iommu group 0
[ 3.650372] fsl_mc_allocator dpmcp.23: Adding to iommu group 0
[ 3.656825] fsl_mc_allocator dpmcp.22: Adding to iommu group 0
[ 3.663286] fsl_mc_allocator dpmcp.21: Adding to iommu group 0
[ 3.669747] fsl_mc_allocator dpmcp.20: Adding to iommu group 0
[ 3.676198] fsl_mc_allocator dpmcp.19: Adding to iommu group 0
[ 3.682650] fsl_mc_allocator dpmcp.18: Adding to iommu group 0
[ 3.689098] fsl_mc_allocator dpmcp.17: Adding to iommu group 0
[ 3.695550] fsl_mc_allocator dpmcp.16: Adding to iommu group 0
[ 3.702002] fsl_mc_allocator dpmcp.15: Adding to iommu group 0
[ 3.708451] fsl_mc_allocator dpmcp.14: Adding to iommu group 0
[ 3.714916] fsl_mc_allocator dpmcp.13: Adding to iommu group 0
[ 3.721371] fsl_mc_allocator dpmcp.12: Adding to iommu group 0
[ 3.727824] fsl_mc_allocator dpmcp.11: Adding to iommu group 0
[ 3.734279] fsl_mc_allocator dpmcp.10: Adding to iommu group 0
[ 3.740732] fsl_mc_allocator dpmcp.9: Adding to iommu group 0
[ 3.747100] fsl_mc_allocator dpmcp.8: Adding to iommu group 0
[ 3.753469] fsl_mc_allocator dpmcp.7: Adding to iommu group 0
[ 3.759836] fsl_mc_allocator dpmcp.6: Adding to iommu group 0
[ 3.766200] fsl_mc_allocator dpmcp.5: Adding to iommu group 0
[ 3.772577] fsl_mc_allocator dpmcp.4: Adding to iommu group 0
[ 3.778941] fsl_mc_allocator dpmcp.3: Adding to iommu group 0
[ 3.785329] fsl_mc_allocator dpmcp.2: Adding to iommu group 0
[ 3.791694] fsl_mc_allocator dpmcp.1: Adding to iommu group 0
[ 3.797568] fsl_mc_allocator dpcon.72: Adding to iommu group 0
[ 3.803522] fsl_mc_allocator dpcon.71: Adding to iommu group 0
[ 3.809472] fsl_mc_allocator dpcon.70: Adding to iommu group 0
[ 3.815433] fsl_mc_allocator dpcon.69: Adding to iommu group 0
[ 3.821385] fsl_mc_allocator dpcon.68: Adding to iommu group 0
[ 3.827340] fsl_mc_allocator dpcon.67: Adding to iommu group 0
[ 3.833293] fsl_mc_allocator dpcon.66: Adding to iommu group 0
[ 3.839248] fsl_mc_allocator dpcon.65: Adding to iommu group 0
[ 3.845206] fsl_mc_allocator dpcon.64: Adding to iommu group 0
[ 3.851161] fsl_mc_allocator dpcon.63: Adding to iommu group 0
[ 3.857112] fsl_mc_allocator dpcon.62: Adding to iommu group 0
[ 3.863072] fsl_mc_allocator dpcon.61: Adding to iommu group 0
[ 3.869027] fsl_mc_allocator dpcon.60: Adding to iommu group 0
[ 3.874995] fsl_mc_allocator dpcon.59: Adding to iommu group 0
[ 3.880947] fsl_mc_allocator dpcon.58: Adding to iommu group 0
[ 3.886910] fsl_mc_allocator dpcon.57: Adding to iommu group 0
[ 3.892861] fsl_mc_allocator dpcon.56: Adding to iommu group 0
[ 3.898819] fsl_mc_allocator dpcon.55: Adding to iommu group 0
[ 3.904773] fsl_mc_allocator dpcon.54: Adding to iommu group 0
[ 3.910736] fsl_mc_allocator dpcon.53: Adding to iommu group 0
[ 3.916692] fsl_mc_allocator dpcon.52: Adding to iommu group 0
[ 3.922646] fsl_mc_allocator dpcon.51: Adding to iommu group 0
[ 3.928607] fsl_mc_allocator dpcon.50: Adding to iommu group 0
[ 3.934561] fsl_mc_allocator dpcon.49: Adding to iommu group 0
[ 3.940519] fsl_mc_allocator dpcon.48: Adding to iommu group 0
[ 3.946474] fsl_mc_allocator dpcon.47: Adding to iommu group 0
[ 3.952431] fsl_mc_allocator dpcon.46: Adding to iommu group 0
[ 3.958384] fsl_mc_allocator dpcon.45: Adding to iommu group 0
[ 3.964345] fsl_mc_allocator dpcon.44: Adding to iommu group 0
[ 3.970298] fsl_mc_allocator dpcon.43: Adding to iommu group 0
[ 3.976256] fsl_mc_allocator dpcon.42: Adding to iommu group 0
[ 3.982213] fsl_mc_allocator dpcon.41: Adding to iommu group 0
[ 3.988177] fsl_mc_allocator dpcon.40: Adding to iommu group 0
[ 3.994136] fsl_mc_allocator dpcon.39: Adding to iommu group 0
[ 4.000090] fsl_mc_allocator dpcon.38: Adding to iommu group 0
[ 4.006057] fsl_mc_allocator dpcon.37: Adding to iommu group 0
[ 4.012012] fsl_mc_allocator dpcon.36: Adding to iommu group 0
[ 4.017979] fsl_mc_allocator dpcon.35: Adding to iommu group 0
[ 4.023935] fsl_mc_allocator dpcon.34: Adding to iommu group 0
[ 4.029896] fsl_mc_allocator dpcon.33: Adding to iommu group 0
[ 4.035851] fsl_mc_allocator dpcon.32: Adding to iommu group 0
[ 4.041813] fsl_mc_allocator dpcon.31: Adding to iommu group 0
[ 4.047770] fsl_mc_allocator dpcon.30: Adding to iommu group 0
[ 4.053735] fsl_mc_allocator dpcon.29: Adding to iommu group 0
[ 4.059694] fsl_mc_allocator dpcon.28: Adding to iommu group 0
[ 4.065655] fsl_mc_allocator dpcon.27: Adding to iommu group 0
[ 4.071612] fsl_mc_allocator dpcon.26: Adding to iommu group 0
[ 4.077573] fsl_mc_allocator dpcon.25: Adding to iommu group 0
[ 4.083531] fsl_mc_allocator dpcon.24: Adding to iommu group 0
[ 4.089491] fsl_mc_allocator dpcon.23: Adding to iommu group 0
[ 4.095453] fsl_mc_allocator dpcon.22: Adding to iommu group 0
[ 4.101417] fsl_mc_allocator dpcon.21: Adding to iommu group 0
[ 4.107377] fsl_mc_allocator dpcon.20: Adding to iommu group 0
[ 4.113334] fsl_mc_allocator dpcon.19: Adding to iommu group 0
[ 4.119298] fsl_mc_allocator dpcon.18: Adding to iommu group 0
[ 4.125256] fsl_mc_allocator dpcon.17: Adding to iommu group 0
[ 4.131217] fsl_mc_allocator dpcon.16: Adding to iommu group 0
[ 4.137188] fsl_mc_allocator dpcon.15: Adding to iommu group 0
[ 4.143150] fsl_mc_allocator dpcon.14: Adding to iommu group 0
[ 4.149109] fsl_mc_allocator dpcon.13: Adding to iommu group 0
[ 4.155074] fsl_mc_allocator dpcon.12: Adding to iommu group 0
[ 4.161033] fsl_mc_allocator dpcon.11: Adding to iommu group 0
[ 4.166995] fsl_mc_allocator dpcon.10: Adding to iommu group 0
[ 4.172955] fsl_mc_allocator dpcon.9: Adding to iommu group 0
[ 4.178839] fsl_mc_allocator dpcon.8: Adding to iommu group 0
[ 4.184714] fsl_mc_allocator dpcon.7: Adding to iommu group 0
[ 4.190599] fsl_mc_allocator dpcon.6: Adding to iommu group 0
[ 4.196485] fsl_mc_allocator dpcon.5: Adding to iommu group 0
[ 4.202358] fsl_mc_allocator dpcon.4: Adding to iommu group 0
[ 4.208236] fsl_mc_allocator dpcon.3: Adding to iommu group 0
[ 4.214109] fsl_mc_allocator dpcon.2: Adding to iommu group 0
[ 4.219986] fsl_mc_allocator dpcon.1: Adding to iommu group 0
[ 4.225860] fsl_mc_allocator dpcon.0: Adding to iommu group 0
[ 4.244320] fsl_mc_dprc dprc.1: DPRC device bound to driver
[ 4.250000] pcieport 0000:00:00.0: Adding to iommu group 1
[ 4.255763] pcieport 0000:00:00.0: PME: Signaling with IRQ 361
[ 4.261750] pcieport 0000:00:00.0: AER: enabled with IRQ 361
[ 4.267588] pcieport 0001:00:00.0: Adding to iommu group 2
[ 4.273311] pcieport 0001:00:00.0: PME: Signaling with IRQ 362
[ 4.279293] pcieport 0001:00:00.0: AER: enabled with IRQ 362
[ 4.285102] pcieport 0001:01:00.0: Adding to iommu group 2
[ 4.291384] pcieport 0001:02:01.0: Adding to iommu group 2
[ 4.297490] pcieport 0001:02:01.0: DPC: enabled with IRQ 365
[ 4.303156] pcieport 0001:02:01.0: DPC: error containment capabilities: Int Msg #1, RPExt- PoisonedTLP- SwTrigger- RP PIO Log 0, DL_ActiveErr-
[ 4.316346] pcieport 0001:02:02.0: Adding to iommu group 2
[ 4.322427] pcieport 0001:02:02.0: DPC: enabled with IRQ 367
[ 4.328098] pcieport 0001:02:02.0: DPC: error containment capabilities: Int Msg #1, RPExt- PoisonedTLP- SwTrigger- RP PIO Log 0, DL_ActiveErr-
[ 4.341301] pcieport 0002:00:00.0: Adding to iommu group 3
[ 4.347013] pcieport 0002:00:00.0: PME: Signaling with IRQ 368
[ 4.353007] pcieport 0002:00:00.0: AER: enabled with IRQ 368
[ 4.362980] Freeing unused kernel memory: 5440K
[ 4.544845] Checked W+X mappings: passed, no W+X pages found
[ 4.550525] Run /init as init process
Loading, please wait...
Starting version 247.3-5
[ 4.783554] input: buttons as /devices/platform/buttons/input/input0
[ 4.790427] imx-i2c 2000000.i2c: can't get pinctrl, bus recovery not supported
[ 4.802275] pca953x 0-0076: supply vcc not found, using dummy regulator
[ 4.809106] pca953x 0-0076: using no AI
[ 4.810572] sdhci: Secure Digital Host Controller Interface driver
[ 4.817035] gpio-381 (admin_led_lower): hogged as output/low
[ 4.819143] sdhci: Copyright(c) Pierre Ossman
[ 4.825802] i2c i2c-0: IMX I2C adapter registered
[ 4.834093] sdhci-pltfm: SDHCI platform and OF driver helper
[ 4.844937] libphy: Fixed MDIO Bus: probed
[ 4.853277] libphy: Freescale XGMAC MDIO Bus: probed
[ 4.864088] fsl_mc_dpio dpio.8: Adding to iommu group 0
[ 4.866359] imx-i2c 2020000.i2c: can't get pinctrl, bus recovery not supported
[ 4.868694] mmc0: SDHCI controller on 2140000.esdhc [2140000.esdhc] using ADMA 64-bit
[ 4.875430] fsl_mc_dpio dpio.8: probed
[ 4.876868] i2c i2c-1: IMX I2C adapter registered
[ 4.885523] fsl_mc_dpio dpio.7: Adding to iommu group 0
[ 4.888385] imx-i2c 2030000.i2c: can't get pinctrl, bus recovery not supported
[ 4.893226] MACsec IEEE 802.1AE
[ 4.898369] i2c i2c-2: IMX I2C adapter registered
[ 4.898394] fsl_mc_dpio dpio.7: probed
[ 4.899081] fsl_mc_dpio dpio.6: Adding to iommu group 0
[ 4.902704] fsl_mc_dpio dpio.6: probed
[ 4.903335] fsl_mc_dpio dpio.5: Adding to iommu group 0
[ 4.905897] nvme 0002:01:00.0: Adding to iommu group 3
[ 4.906716] fsl_mc_dpio dpio.5: probed
[ 4.907361] fsl_mc_dpio dpio.4: Adding to iommu group 0
[ 4.913285] fsl_mc_dpio dpio.4: probed
[ 4.917448] nvme nvme0: pci function 0002:01:00.0
[ 4.923198] fsl_mc_dpio dpio.3: Adding to iommu group 0
[ 4.924766] usbcore: registered new interface driver usbfs
[ 4.924799] usbcore: registered new interface driver hub
[ 4.924838] usbcore: registered new device driver usb
[ 4.933639] i2c i2c-2: Added multiplexed i2c bus 3
[ 4.936637] nvme nvme0: Shutdown timeout set to 10 seconds
[ 4.940057] fsl_mc_dpio dpio.3: probed
[ 4.940187] i2c i2c-2: Added multiplexed i2c bus 4
[ 4.940766] fsl_mc_dpio dpio.2: Adding to iommu group 0
[ 4.944325] fsl_mc_dpio dpio.2: probed
[ 4.945003] fsl_mc_dpio dpio.1: Adding to iommu group 0
[ 4.948648] nvme nvme0: 8/0/0 default/read/poll queues
[ 4.948844] fsl_mc_dpio dpio.1: probed
[ 4.949082] pca954x 2-0070: registered 2 multiplexed busses for I2C mux pca9540
[ 4.959564] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 4.962029] libphy: Freescale XGMAC MDIO Bus: probed
[ 4.966368] fsl_dpaa2_eth dpni.9: Adding to iommu group 0
[ 4.967841] libphy: Freescale XGMAC MDIO Bus: probed
[ 4.969846] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 4.973016] libphy: Freescale XGMAC MDIO Bus: probed
[ 4.977196] nvme0n1: p1 p2 p15
[ 4.979805] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
[ 4.992021] libphy: Freescale XGMAC MDIO Bus: probed
[ 4.993744] xhci-hcd xhci-hcd.0.auto: irq 22, io mem 0x03100000
[ 5.081118] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 5.089398] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.096629] usb usb1: Product: xHCI Host Controller
[ 5.101505] usb usb1: Manufacturer: Linux 5.10.0-7-arm64 xhci-hcd
[ 5.107597] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 5.112884] hub 1-0:1.0: USB hub found
[ 5.116774] hub 1-0:1.0: 1 port detected
[ 5.120958] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 5.126454] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 5.134118] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 5.140684] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 5.148854] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 5.157122] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.164344] usb usb2: Product: xHCI Host Controller
[ 5.169221] usb usb2: Manufacturer: Linux 5.10.0-7-arm64 xhci-hcd
[ 5.175311] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 5.180491] hub 2-0:1.0: USB hub found
[ 5.184264] hub 2-0:1.0: 1 port detected
[ 5.188547] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 5.194046] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 5.201811] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
[ 5.211241] xhci-hcd xhci-hcd.1.auto: irq 23, io mem 0x03110000
[ 5.217356] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 5.225632] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.232856] usb usb3: Product: xHCI Host Controller
[ 5.237738] usb usb3: Manufacturer: Linux 5.10.0-7-arm64 xhci-hcd
[ 5.243836] usb usb3: SerialNumber: xhci-hcd.1.auto
[ 5.249019] hub 3-0:1.0: USB hub found
[ 5.252790] hub 3-0:1.0: 1 port detected
[ 5.256936] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 5.262431] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 5.270093] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 5.276655] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 5.284816] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 5.293080] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.300299] usb usb4: Product: xHCI Host Controller
[ 5.305175] usb usb4: Manufacturer: Linux 5.10.0-7-arm64 xhci-hcd
[ 5.311265] usb usb4: SerialNumber: xhci-hcd.1.auto
[ 5.316421] hub 4-0:1.0: USB hub found
[ 5.320191] hub 4-0:1.0: 1 port detected
[ 5.469839] fsl_dpaa2_eth dpni.9 (unnamed net_device) (uninitialized): PHY [0x0000000008b96000:1c] driver [Microsemi GE VSC8514 SyncE] (irq=POLL)
[ 5.483445] fsl_dpaa2_eth dpni.9: Probed interface eth0
[ 5.488842] fsl_dpaa2_eth dpni.8: Adding to iommu group 0
[ 5.589150] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 5.725827] fsl_dpaa2_eth dpni.8 (unnamed net_device) (uninitialized): PHY [0x0000000008b96000:1d] driver [Microsemi GE VSC8514 SyncE] (irq=POLL)
[ 5.739367] fsl_dpaa2_eth dpni.8: Probed interface eth1
[ 5.741631] usb 3-1: New USB device found, idVendor=0424, idProduct=2744, bcdDevice= 2.08
[ 5.744746] fsl_dpaa2_eth dpni.7: Adding to iommu group 0
[ 5.752765] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.765291] usb 3-1: Product: USB2744
[ 5.768947] usb 3-1: Manufacturer: Microchip Tech
[ 5.820793] hub 3-1:1.0: USB hub found
[ 5.824580] hub 3-1:1.0: 4 ports detected
[ 5.884641] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 5.909514] usb 4-1: New USB device found, idVendor=0424, idProduct=5744, bcdDevice= 2.08
[ 5.917697] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[ 5.924835] usb 4-1: Product: USB5744
[ 5.928495] usb 4-1: Manufacturer: Microchip Tech
[ 5.964783] hub 4-1:1.0: USB hub found
[ 5.968567] hub 4-1:1.0: 4 ports detected
[ 6.005849] fsl_dpaa2_eth dpni.7 (unnamed net_device) (uninitialized): PHY [0x0000000008b96000:1e] driver [Microsemi GE VSC8514 SyncE] (irq=POLL)
[ 6.019465] fsl_dpaa2_eth dpni.7: Probed interface eth2
[ 6.024856] fsl_dpaa2_eth dpni.6: Adding to iommu group 0
[ 6.253834] fsl_dpaa2_eth dpni.6 (unnamed net_device) (uninitialized): PHY [0x0000000008b96000:1f] driver [Microsemi GE VSC8514 SyncE] (irq=POLL)
[ 6.267409] fsl_dpaa2_eth dpni.6: Probed interface eth3
[ 6.272786] fsl_dpaa2_eth dpni.5: Adding to iommu group 0
[ 6.765832] fsl_dpaa2_eth dpni.5 (unnamed net_device) (uninitialized): PHY [0x0000000008b96000:0c] driver [Microsemi GE VSC8514 SyncE] (irq=POLL)
[ 6.779375] fsl_dpaa2_eth dpni.5: Probed interface eth4
[ 6.784745] fsl_dpaa2_eth dpni.4: Adding to iommu group 0
[ 7.037830] fsl_dpaa2_eth dpni.4 (unnamed net_device) (uninitialized): PHY [0x0000000008b96000:0d] driver [Microsemi GE VSC8514 SyncE] (irq=POLL)
[ 7.051375] fsl_dpaa2_eth dpni.4: Probed interface eth5
[ 7.056740] fsl_dpaa2_eth dpni.3: Adding to iommu group 0
[ 7.309831] fsl_dpaa2_eth dpni.3 (unnamed net_device) (uninitialized): PHY [0x0000000008b96000:0e] driver [Microsemi GE VSC8514 SyncE] (irq=POLL)
[ 7.323368] fsl_dpaa2_eth dpni.3: Probed interface eth6
[ 7.328730] fsl_dpaa2_eth dpni.2: Adding to iommu group 0
[ 7.581832] fsl_dpaa2_eth dpni.2 (unnamed net_device) (uninitialized): PHY [0x0000000008b96000:0f] driver [Microsemi GE VSC8514 SyncE] (irq=POLL)
[ 7.595402] fsl_dpaa2_eth dpni.2: Probed interface eth7
[ 7.600763] fsl_dpaa2_eth dpni.1: Adding to iommu group 0
[ 7.646302] fsl_dpaa2_eth dpni.1: Probed interface eth8
[ 7.651671] fsl_dpaa2_eth dpni.0: Adding to iommu group 0
[ 7.697161] fsl_dpaa2_eth dpni.0: Probed interface eth9
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.36.1
[/sbin/fsck.ext4 (1) -- /dev/nvme0n1p1] fsck.ext4 -a -C0 /dev/nvme0n1p1
/dev/nvme0n1p1: clean, 28520/15360000 files, 1174516/61433430 blocks
done.
[ 7.866220] random: fast init done
[ 7.881203] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... GROWROOT: NOCHANGE: partition 1 is size 491467440. it cannot be grown
done.
Begin: Running /scripts/init-bottom ... done.
[ 8.044059] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 8.100840] systemd[1]: System time before build time, advancing clock.
[ 8.118406] systemd[1]: Inserted module 'autofs4'
[ 8.185572] systemd[1]: systemd 247.3-5 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 8.208417] systemd[1]: Detected architecture arm64.
Welcome to Debian GNU/Linux 11 (bullseye)!
[ 8.233861] systemd[1]: Set hostname to <debian>.
[ 8.239571] random: systemd: uninitialized urandom read (16 bytes read)
[ 8.246200] systemd[1]: Initializing machine ID from random generator.
[ 8.252845] systemd[1]: Installed transient /etc/machine-id file.
[ 8.579809] systemd[1]: Queued start job for default target Graphical Interface.
[ 8.588085] random: systemd: uninitialized urandom read (16 bytes read)
[ 8.596397] systemd[1]: Created slice system-getty.slice.
[ OK ] Created slice system-getty.slice.
[ 8.617297] random: systemd: uninitialized urandom read (16 bytes read)
[ 8.624600] systemd[1]: Created slice system-modprobe.slice.
[ OK ] Created slice system-modprobe.slice.
[ 8.646063] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ 8.669818] systemd[1]: Created slice system-systemd\x2dgrowfs.slice.
[ OK ] Created slice system-systemd\x2dgrowfs.slice.
[ 8.693742] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 8.713370] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Started Dispatch Password …ts to Console Directory Watch.
[ 8.737319] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Forward Password R…uests to Wall Directory Watch.
[ 8.761626] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ OK ] Set up automount Arbitrary…s File System Automount Point.
[ 8.789306] systemd[1]: Reached target Local Encrypted Volumes.
[ OK ] Reached target Local Encrypted Volumes.
[ 8.809290] systemd[1]: Reached target Paths.
[ OK ] Reached target Paths.
[ 8.829215] systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
[ 8.849204] systemd[1]: Reached target Slices.
[ OK ] Reached target Slices.
[ 8.869256] systemd[1]: Reached target System Time Set.
[ OK ] Reached target System Time Set.
[ 8.889506] systemd[1]: Listening on Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 8.909427] systemd[1]: Listening on fsck to fsckd communication Socket.
[ OK ] Listening on fsck to fsckd communication Socket.
[ 8.933322] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ 8.957596] systemd[1]: Listening on Journal Audit Socket.
[ OK ] Listening on Journal Audit Socket.
[ 8.977425] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 8.997506] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 9.017552] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 9.037423] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 9.059332] systemd[1]: Mounting Huge Pages File System...
Mounting Huge Pages File System...
[ 9.079194] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 9.103220] systemd[1]: Mounting Kernel Debug File System...
Mounting Kernel Debug File System...
[ 9.123542] systemd[1]: Mounting Kernel Trace File System...
Mounting Kernel Trace File System...
[ 9.147646] systemd[1]: Starting Create list of static device nodes for the current kernel...
Starting Create list of st…odes for the current kernel...
[ 9.175354] systemd[1]: Starting Load Kernel Module configfs...
Starting Load Kernel Module configfs...
[ 9.199376] systemd[1]: Starting Load Kernel Module drm...
Starting Load Kernel Module drm...
[ 9.219387] systemd[1]: Starting Load Kernel Module fuse...
Starting Load Kernel Module fuse...
[ 9.239230] fuse: init (API version 7.32)
[ 9.245378] systemd[1]: Started Nameserver information manager.
[ OK ] Started Nameserver information manager.
[ 9.266057] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 9.275235] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 9.288172] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 9.312271] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 9.339480] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting Remount Root and Kernel File Systems...
[ 9.363067] EXT4-fs (nvme0n1p1): re-mounted. Opts: discard,errors=remount-ro
[ 9.372502] systemd[1]: Starting Coldplug All udev Devices...
Starting Coldplug All udev Devices...
[ 9.398086] systemd[1]: Mounted Huge Pages File System.
[ OK ] Mounted Huge Pages File System.
[ 9.417616] systemd[1]: Mounted POSIX Message Queue File System.
[ OK ] Mounted POSIX Message Queue File System.
[ 9.445601] systemd[1]: Mounted Kernel Debug File System.
[ OK ] Mounted Kernel Debug File System.
[ 9.469676] systemd[1]: Mounted Kernel Trace File System.
[ OK ] Mounted Kernel Trace File System.
[ 9.494305] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ OK ] Finished Create list of st… nodes for the current kernel.
[ 9.526045] systemd[1]: modprobe@configfs.service: Succeeded.
[ 9.532672] systemd[1]: Finished Load Kernel Module configfs.
[ OK ] Finished Load Kernel Module configfs.
[ 9.557528] systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
[ OK ] Finished Load Kernel Module drm.
[ OK ] Finished Load Kernel Module fuse.
[ OK ] Finished Load Kernel Modules.
[ OK ] Finished Remount Root and Kernel File Systems.
Mounting FUSE Control File System...
Mounting Kernel Configuration File System...
Starting Initial cloud-init job (pre-networking)...
Starting Grow File System on /...
[ 9.727215] EXT4-fs (nvme0n1p1): resizing filesystem from 61433430 to 61433430 blocks
Starting Flush Journal to Persistent Storage...
[ 9.750599] systemd-journald[304]: Received client request to flush runtime journal.
Starting Load/Save Random Seed...
Starting Apply Kernel Variables...
Starting Create System Users...
[ OK ] Mounted FUSE Control File System.
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Finished Grow File System on /.
[ OK ] Finished Coldplug All udev Devices.
[ OK ] Finished Flush Journal to Persistent Storage.
[ OK ] Finished Apply Kernel Variables.
[ OK ] Finished Create System Users.
Starting Helper to synchronize boot up for ifupdown...
Starting Create Static Device Nodes in /dev...
[ OK ] Finished Helper to synchronize boot up for ifupdown.
[ OK ] Finished Create Static Device Nodes in /dev.
[ OK ] Reached target Local File Systems (Pre).
Starting Rule-based Manage…for Device Events and Files...
[ OK ] Started Rule-based Manager for Device Events and Files.
[ 10.163911] qoriq-cpufreq qoriq-cpufreq: Freescale QorIQ CPU frequency scaling driver
[ 10.176243] optee: probing for conduit method.
[ 10.180817] optee: api uid mismatch
[ 10.185444] optee: probe of firmware:optee failed with error -22
[ OK ] Found device /dev/ttyS0.
[ 10.229074] caam 8000000.crypto: device ID = 0x0a13030000000000 (Era 8)
[ 10.235734] caam 8000000.crypto: job rings = 3, qi = 1
[ OK ] Found device SAMSUNG MZVL2256HCHQ-00B00 swap.
[ 10.305614] dpaa2_caam dpseci.0: Adding to iommu group 0
[ 10.313179] dpaa2_caam dpseci.0: dpseci v5.3
[ 10.328743] sp805-wdt c000000.wdt: registration successful
[ OK 10.334699] sp805-wdt c010000.wdt: registration successful
0m] Found device[ 10.341964] sp805-wdt c020000.wdt: registration successful
SAMSUN[ 10.348611] fsl_mc_dprc dprc.1 (unnamed net_device) (uninitialized): netif_napi_add() called with weight 512
G MZVL2256HCHQ-0[ 10.348670] sp805-wdt c030000.wdt: registration successful
0B00 UEFI.
[ 10.367667] sp805-wdt c100000.wdt: registration successful
[ 10.373712] sp805-wdt c110000.wdt: registration successful
[ 10.379731] sp805-wdt c120000.wdt: registration successful
[ 10.386277] sp805-wdt c130000.wdt: registration successful
[ 10.404024] cryptd: max_cpu_qlen set to 1000
Activating swap /dev/disk/…2d93-415d-9ba1-35cc79eaa81c...
Mounting /boot/efi...
[ 10.493209] Adding 4194280k swap on /dev/nvme0n1p2. Priority:-2 extents:1 across:4194280k SSFS
[ OK ] Activated swap /dev/disk/b…8-2d93-415d-9ba1-35cc79eaa81c.
[ OK ] Mounted /boot/efi.
[ OK ] Reached target Local File Systems.
[ OK ] Reached target Swap.
[ 10.594498] dpaa2_caam dpseci.0: FD error: 000000a0
[ 10.599448] dpaa2_caam dpseci.0: FD error: 000000a0
Startin[ 10.605121] dpaa2_caam dpseci.0: FD error: 000000a0
g Load [ 10.610922] dpaa2_caam dpseci.0: FD error: 000000a0
AppArmor profile[ 10.617166] dpaa2_caam dpseci.0: FD error: 000000a0
s...
[ 10.623405] dpaa2_caam dpseci.0: FD error: 000000a0
[ 10.629094] alg: No test for authenc(hmac(sha224),ecb(cipher_null)) (authenc-hmac-sha224-ecb-cipher_null-caam)
[ 10.629144] dpaa2_caam dpseci.0: FD error: 000000a0
Startin[ 10.644195] alg: No test for authenc(hmac(sha256),ecb(cipher_null)) (authenc-hmac-sha256-ecb-cipher_null-caam)
g Creat[ 10.650664] alg: No test for authenc(hmac(md5),cbc(aes)) (authenc-hmac-md5-cbc-aes-caam-qi2)
e Volatile Files[ 10.655660] alg: No test for authenc(hmac(sha384),ecb(cipher_null)) (authenc-hmac-sha384-ecb-cipher_null-caam)
and Directories[ 10.665455] alg: No test for echainiv(authenc(hmac(md5),cbc(aes))) (echainiv-authenc-hmac-md5-cbc-aes-caam-qi2)
...
[ 10.688448] alg: No test for authenc(hmac(sha512),ecb(cipher_null)) (authenc-hmac-sha512-ecb-cipher_null-caam)
[ 10.692196] alg: No test for echainiv(authenc(hmac(sha1),cbc(aes))) (echainiv-authenc-hmac-sha1-cbc-aes-caam-qi2)
[ 10.709497] alg: No test for authenc(hmac(md5),cbc(aes)) (authenc-hmac-md5-cbc-aes-caam)
[ 10.717930] alg: No test for authenc(hmac(sha224),cbc(aes)) (authenc-hmac-sha224-cbc-aes-caam-qi2)
[ 10.727327] alg: No test for echainiv(authenc(hmac(md5),cbc(aes))) (echainiv-authenc-hmac-md5-cbc-aes-caam)
[ OK 10.737624] alg: No test for echainiv(authenc(hmac(sha224),cbc(aes))) (echainiv-authenc-hmac-sha224-cbc-aes-caam-qi2)
0m] Finished Create Volatile Files and Directories.[ 10.754530] alg: No test for echainiv(authenc(hmac(sha1),cbc(aes))) (echainiv-authenc-hmac-sha1-cbc-aes-caam)
[ 10.757290] alg: No test for echainiv(authenc(hmac(sha256),cbc(aes))) (echainiv-authenc-hmac-sha256-cbc-aes-caam-qi2)
[ 10.775667] alg: No test for authenc(hmac(sha384),cbc(aes)) (authenc-hmac-sha384-cbc-aes-caam-qi2)
Startin[ 10.786419] alg: No test for echainiv(authenc(hmac(sha384),cbc(aes))) (echainiv-authenc-hmac-sha384-cbc-aes-caam-qi2)
g Update UTMP about System Boot/Shutdow[ 10.801567] alg: No test for authenc(hmac(sha224),cbc(aes)) (authenc-hmac-sha224-cbc-aes-caam)
n...
[ 10.813320] alg: No test for echainiv(authenc(hmac(sha224),cbc(aes))) (echainiv-authenc-hmac-sha224-cbc-aes-caam)
[ 10.829836] alg: No test for echainiv(authenc(hmac(sha256),cbc(aes))) (echainiv-authenc-hmac-sha256-cbc-aes-caam)
[ 10.840406] alg: No test for echainiv(authenc(hmac(sha512),cbc(aes))) (echainiv-authenc-hmac-sha512-cbc-aes-caam-qi2)
[ 10.840642] alg: No test for authenc(hmac(sha384),cbc(aes)) (authenc-hmac-sha384-cbc-aes-caam)
[ 10.856745] audit: type=1400 audit(1618251686.747:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=540 comm="apparmor_parser"
[ 10.860695] alg: No test for authenc(hmac(md5),cbc(des3_ede)) (authenc-hmac-md5-cbc-des3_ede-caam-qi2)
[ 10.875064] audit: type=1400 audit(1618251686.747:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=540 comm="apparmor_parser"
[ 10.875076] audit: type=1400 audit(1618251686.755:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=537 comm="apparmor_parser"
[ 10.884583] alg: No test for echainiv(authenc(hmac(md5),cbc(des3_ede))) (echainiv-authenc-hmac-md5-cbc-des3_ede-caam-qi2)
[ 10.917166] alg: No test for echainiv(authenc(hmac(sha384),cbc(aes))) (echainiv-authenc-hmac-sha384-cbc-aes-caam)
[ 10.927049] alg: No test for echainiv(authenc(hmac(sha1),cbc(des3_ede))) (echainiv-authenc-hmac-sha1-cbc-des3_ede-caam-qi2)
[ 10.939891] alg: No test for echainiv(authenc(hmac(sha512),cbc(aes))) (echainiv-authenc-hmac-sha512-cbc-aes-caam)
[ 10.948693] alg: No test for echainiv(authenc(hmac(sha224),cbc(des3_ede))) (echainiv-authenc-hmac-sha224-cbc-des3_ede-caam-qi2)
[ 10.965218] audit: type=1400 audit(1618251686.859:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=538 comm="apparmor_parser"
[ 10.970489] alg: No test for echainiv(authenc(hmac(sha256),cbc(des3_ede))) (echainiv-authenc-hmac-sha256-cbc-des3_ede-caam-qi2)
[ 10.984771] alg: No test for authenc(hmac(md5),cbc(des3_ede)) (authenc-hmac-md5-cbc-des3_ede-caam)
[ 10.984783] audit: type=1400 audit(1618251686.859:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=538 comm="apparmor_parser"
[ 10.984793] audit: type=1400 audit(1618251686.863:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=538 comm="apparmor_parser"
[ 10.997036] alg: No test for echainiv(authenc(hmac(sha384),cbc(des3_ede))) (echainiv-authenc-hmac-sha384-cbc-des3_ede-caam-qi2)
[ 11.005320] alg: No test for echainiv(authenc(hmac(md5),cbc(des3_ede))) (echainiv-authenc-hmac-md5-cbc-des3_ede-caam)
[ 11.020976] alg: No test for echainiv(authenc(hmac(sha512),cbc(des3_ede))) (echainiv-authenc-hmac-sha512-cbc-des3_ede-caam-qi2)
[ 11.035710] alg: No test for echainiv(authenc(hmac(sha1),cbc(des3_ede))) (echainiv-authenc-hmac-sha1-cbc-des3_ede-caam)
[ 11.040992] audit: type=1400 audit(1618251686.931:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/chronyd" pid=539 comm="apparmor_parser"
[ 11.046466] alg: No test for authenc(hmac(md5),cbc(des)) (authenc-hmac-md5-cbc-des-caam-qi2)
[ 11.057617] alg: No test for echainiv(authenc(hmac(sha224),cbc(des3_ede))) (echainiv-authenc-hmac-sha224-cbc-des3_ede-caam)
[ 11.068539] alg: No test for echainiv(authenc(hmac(md5),cbc(des))) (echainiv-authenc-hmac-md5-cbc-des-caam-qi2)
[ 11.079995] alg: No test for echainiv(authenc(hmac(sha256),cbc(des3_ede))) (echainiv-authenc-hmac-sha256-cbc-des3_ede-caam)
[ 11.087597] audit: type=1400 audit(1618251686.983:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="tcpdump" pid=536 comm="apparmor_parser"
[ 11.095577] alg: No test for echainiv(authenc(hmac(sha1),cbc(des))) (echainiv-authenc-hmac-sha1-cbc-des-caam-qi2)
[ 11.103841] alg: No test for echainiv(authenc(hmac(sha384),cbc(des3_ede))) (echainiv-authenc-hmac-sha384-cbc-des3_ede-caam)
[ 11.116252] alg: No test for echainiv(authenc(hmac(sha224),cbc(des))) (echainiv-authenc-hmac-sha224-cbc-des-caam-qi2)
[ 11.125095] alg: No test for echainiv(authenc(hmac(sha512),cbc(des3_ede))) (echainiv-authenc-hmac-sha512-cbc-des3_ede-caam)
[ 11.137336] alg: No test for echainiv(authenc(hmac(sha256),cbc(des))) (echainiv-authenc-hmac-sha256-cbc-des-caam-qi2)
[ 11.150293] alg: No test for authenc(hmac(md5),cbc(des)) (authenc-hmac-md5-cbc-des-caam)
[ 11.162441] alg: No test for echainiv(authenc(hmac(sha384),cbc(des))) (echainiv-authenc-hmac-sha384-cbc-des-caam-qi2)
[ 11.171905] alg: No test for echainiv(authenc(hmac(md5),cbc(des))) (echainiv-authenc-hmac-md5-cbc-des-caam)
[ 11.184465] alg: No test for echainiv(authenc(hmac(sha512),cbc(des))) (echainiv-authenc-hmac-sha512-cbc-des-caam-qi2)
[ 11.194360] alg: No test for echainiv(authenc(hmac(sha1),cbc(des))) (echainiv-authenc-hmac-sha1-cbc-des-caam)
[ 11.204360] alg: No test for authenc(hmac(md5),rfc3686(ctr(aes))) (authenc-hmac-md5-rfc3686-ctr-aes-caam-qi2)
[ 11.212935] alg: No test for echainiv(authenc(hmac(sha224),cbc(des))) (echainiv-authenc-hmac-sha224-cbc-des-caam)
[ 11.223123] alg: No test for seqiv(authenc(hmac(md5),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-md5-rfc3686-ctr-aes-caam-qi2)
[ 11.233564] alg: No test for echainiv(authenc(hmac(sha256),cbc(des))) (echainiv-authenc-hmac-sha256-cbc-des-caam)
[ 11.243622] alg: No test for seqiv(authenc(hmac(sha1),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha1-rfc3686-ctr-aes-caam-qi2)
[ 11.254123] alg: No test for echainiv(authenc(hmac(sha384),cbc(des))) (echainiv-authenc-hmac-sha384-cbc-des-caam)
[ 11.263433] alg: No test for authenc(hmac(sha224),rfc3686(ctr(aes))) (authenc-hmac-sha224-rfc3686-ctr-aes-caam-qi2)
[ 11.274351] alg: No test for echainiv(authenc(hmac(sha512),cbc(des))) (echainiv-authenc-hmac-sha512-cbc-des-caam)
[ 11.284901] alg: No test for seqiv(authenc(hmac(sha224),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha224-rfc3686-ctr-aes-caam-qi2)
[ 11.295046] alg: No test for authenc(hmac(md5),rfc3686(ctr(aes))) (authenc-hmac-md5-rfc3686-ctr-aes-caam)
[ 11.306638] alg: No test for seqiv(authenc(hmac(sha256),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha256-rfc3686-ctr-aes-caam-qi2)
[ 11.316497] alg: No test for seqiv(authenc(hmac(md5),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-md5-rfc3686-ctr-aes-caam)
[ 11.327026] alg: No test for seqiv(authenc(hmac(sha384),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha384-rfc3686-ctr-aes-caam-qi2)
[ 11.337421] alg: No test for seqiv(authenc(hmac(sha1),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha1-rfc3686-ctr-aes-caam)
[ 11.349007] alg: No test for seqiv(authenc(hmac(sha512),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha512-rfc3686-ctr-aes-caam-qi2)
[ 11.358693] alg: No test for authenc(hmac(sha224),rfc3686(ctr(aes))) (authenc-hmac-sha224-rfc3686-ctr-aes-caam)
[ 11.370036] dpaa2_caam dpseci.0: algorithms registered in /proc/crypto
[ 11.380988] alg: No test for seqiv(authenc(hmac(sha224),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha224-rfc3686-ctr-aes-caam)
[ OK 11.443004] alg: No test for seqiv(authenc(hmac(sha256),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha256-rfc3686-ctr-aes-caam)
0m] Finished 11.455676] alg: No test for seqiv(authenc(hmac(sha384),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha384-rfc3686-ctr-aes-caam)
;1;39mUpdate UTM[ 11.468281] alg: No test for seqiv(authenc(hmac(sha512),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha512-rfc3686-ctr-aes-caam)
P about System B[ 11.480592] caam algorithms registered in /proc/crypto
oot/Shutdown.
[ 10.996345] cloud-init[606]: Cloud-init v. 20.4.1 running 'init-local' at Mon, 12 Apr 2021 18:21:26 +0000. Up 10.90 seconds.
[ OK ] Finished Load AppArmor profiles.
[ 11.598417] dpaa2_caam dpseci.0: hash algorithms registered in /proc/crypto
[ OK ] Finished Initial cloud-init job (pre-networking).
[ OK ] Reached target Network (Pre).
Starting Raise network interfaces...
[ 11.737177] random: crng init done
[ 11.740583] random: 7 urandom warning(s) missed due to ratelimiting
[ OK ] Finished Load/Save Random Seed.
[ 11.779075] caam 8000000.crypto: caam pkc algorithms registered in /proc/crypto
[ 11.786520] caam 8000000.crypto: registering rng-caam
Starting Commit a transient machine-id on disk...
[ 11.819734] fsl_dpaa2_eth dpni.3 eth6: configuring for inband/qsgmii link mode
[ OK ] Finished Commit a transient machine-id on disk.
[** ] A start job is running for Raise network interfaces (6s / 5min 3s)
[ 14.891142] fsl_dpaa2_eth dpni.3 eth6: Link is Up - 1Gbps/Full - flow control rx/tx
[ OK ] Finished Raise network interfaces.
[ OK ] Reached target Network.
Starting Initial cloud-ini… (metadata service crawler)...
[ 31.232856] cloud-init[870]: Cloud-init v. 20.4.1 running 'init' at Mon, 12 Apr 2021 18:21:47 +0000. Up 31.14 seconds.
[ 31.279238] cloud-init[870]: ci-info: +++++++++++++++++++++++++++++++++++++++Net device info+++++++++++++++++++++++++++++++++++++++
[ 31.300623] cloud-init[870]: ci-info: +--------+-------+-----------------------------+---------------+--------+-------------------+
[ 31.320469] cloud-init[870]: ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
[ 31.340516] cloud-init[870]: ci-info: +--------+-------+-----------------------------+---------------+--------+-------------------+
[ 31.360472] cloud-init[870]: ci-info: | eth0 | False | . | . | . | 00:0a:fa:24:2d:95 |
[ 31.380598] cloud-init[870]: ci-info: | eth1 | False | . | . | . | 00:0a:fa:24:2d:96 |
[ 31.400515] cloud-init[870]: ci-info: | eth2 | False | . | . | . | 00:0a:fa:24:2d:97 |
[ 31.420517] cloud-init[870]: ci-info: | eth3 | False | . | . | . | 00:0a:fa:24:2d:98 |
[ 31.440516] cloud-init[870]: ci-info: | eth4 | False | . | . | . | 00:0a:fa:24:2d:99 |
[ 31.460538] cloud-init[870]: ci-info: | eth5 | False | . | . | . | 00:0a:fa:24:2d:9a |
[ 31.480552] cloud-init[870]: ci-info: | eth6 | True | 192.168.0.104 | 255.255.255.0 | global | 00:0a:fa:24:2d:9b |
[ 31.500542] cloud-init[870]: ci-info: | eth6 | True | fe80::20a:faff:fe24:2d9b/64 | . | link | 00:0a:fa:24:2d:9b |
[ 31.520568] cloud-init[870]: ci-info: | eth7 | False | . | . | . | 00:0a:fa:24:2d:9c |
[ 31.540538] cloud-init[870]: ci-info: | eth8 | False | . | . | . | 00:0a:fa:24:2d:9e |
[ 31.560543] cloud-init[870]: ci-info: | eth9 | False | . | . | . | 00:0a:fa:24:2d:9d |
[ 31.580568] cloud-init[870]: ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . |
[ 31.604468] cloud-init[870]: ci-info: | lo | True | ::1/128 | . | host | . |
[ 31.624541] cloud-init[870]: ci-info: +--------+-------+-----------------------------+---------------+--------+-------------------+
[ 31.644465] cloud-init[870]: ci-info: +++++++++++++++++++++++++++++Route IPv4 info+++++++++++++++++++++++++++++
[ 31.664303] cloud-init[870]: ci-info: +-------+-------------+-------------+---------------+-----------+-------+
[ 31.688593] cloud-init[870]: ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
[ 31.708489] cloud-init[870]: ci-info: +-------+-------------+-------------+---------------+-----------+-------+
[ 31.728531] cloud-init[870]: ci-info: | 0 | 0.0.0.0 | 192.168.0.1 | 0.0.0.0 | eth6 | UG |
[ 31.748551] cloud-init[870]: ci-info: | 1 | 192.168.0.0 | 0.0.0.0 | 255.255.255.0 | eth6 | U |
[ 31.768534] cloud-init[870]: ci-info: +-------+-------------+-------------+---------------+-----------+-------+
[ 31.788487] cloud-init[870]: ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
[ 31.804584] cloud-init[870]: ci-info: +-------+-------------+---------+-----------+-------+
[ 31.820571] cloud-init[870]: ci-info: | Route | Destination | Gateway | Interface | Flags |
[ 31.836485] cloud-init[870]: ci-info: +-------+-------------+---------+-----------+-------+
[ 31.852636] cloud-init[870]: ci-info: | 1 | fe80::/64 | :: | eth6 | U |
[ 31.868554] cloud-init[870]: ci-info: | 3 | local | :: | eth6 | U |
[ 31.884296] cloud-init[870]: ci-info: | 4 | multicast | :: | eth6 | U |
[ 31.900279] cloud-init[870]: ci-info: +-------+-------------+---------+-----------+-------+
[ 36.736714] cloud-init[870]: Generating public/private rsa key pair.
[ 36.752619] cloud-init[870]: Your identification has been saved in /etc/ssh/ssh_host_rsa_key
[ 36.776457] cloud-init[870]: Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
[ 36.800535] cloud-init[870]: The key fingerprint is:
[ 36.820533] cloud-init[870]: SHA256:SBl0GdfHGjAPHphfo107ZADZeKfs51mkQQc3qnay+KU root@ten64-sid
[ 36.840554] cloud-init[870]: The key's randomart image is:
[ 36.860503] cloud-init[870]: +---[RSA 3072]----+
[ 36.880318] cloud-init[870]: | .o o=BB.o.o.|
[ 36.896301] cloud-init[870]: | ++oo=B X.o|
[ 36.916345] cloud-init[870]: | o ..*.& o |
[ OK ] Finished Initial cloud-ini…ob (metadata service crawler).
[ 36.932724] cloud-init[870]: | . . o * + .|
[ OK ] Reached target Cloud-config availability.
[ 36.964676] cloud-init[870]: | . S = . = |
[ OK ] Reached target Network is Online.
[ 36.996612] cloud-init[870]: | o = o .|
[ OK ] Reached target System Initialization.
[ 37.028493] cloud-init[870]: | . . + o |
[ OK ] Started Daily Cleanup of Temporary Directories.
[ 37.060569] cloud-init[870]: | . o o |
[ OK ] Listening on D-Bus System Message Bus Socket.
[ 37.092605] cloud-init[870]: | E |
[ OK ] Listening on UUID daemon activation socket.
[ 37.124497] cloud-init[870]: +----[SHA256]-----+
[ OK ] Reached target Sockets.
[ 37.156559] cloud-init[870]: Generating public/private dsa key pair.
[ OK ] Reached target Basic System.
[ 37.188597] cloud-init[870]: Your identification has been saved in /etc/ssh/ssh_host_dsa_key
Starting chrony, an NTP client/server...
[ 37.224320] cloud-init[870]: Your public key has been saved in /etc/ssh/ssh_host_dsa_key.pub
Starting Apply the settings specified in cloud-config...
[ 37.260354] cloud-init[870]: The key fingerprint is:
[ OK ] Started Regular background program processing daemon.
[ 37.292319] cloud-init[870]: SHA256:2oh7YmtiOtYPXp71mG0jHz/vNxAokK6rdAsd4I/pEC0 root@ten64-sid
[ OK ] Started D-Bus System Message Bus.
[ 37.332364] cloud-init[870]: The key's randomart image is:
Starting Remove Stale Onli…t4 Metadata Check Snapshots...
[ 37.364293] cloud-init[870]: +---[DSA 1024]----+
Starting System Logging Service...
[ 37.396375] cloud-init[870]: | . |
Starting OpenBSD Secure Shell server...
[ 37.428436] cloud-init[870]: | o |
Starting User Login Management...
[ 37.460345] cloud-init[870]: | . . . . |
Starting Permit User Sessions...
[ 37.492369] cloud-init[870]: | o . . . . . |
[ OK ] Started chrony, an NTP client/server.
[ 37.528286] cloud-init[870]: | E o .. S . . |
[ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots.
[ 37.560331] cloud-init[870]: | o =o.+ . |
[ OK ] Finished Permit User Sessions.
[ 37.592394] cloud-init[870]: | ..*.=+... . |
[ OK ] Reached target System Time Synchronized.
[ 37.628366] cloud-init[870]: |..B.Xo=.=oo. o |
[ OK ] Started Daily apt download activities.
[ 37.660332] cloud-init[870]: |o+ B=O o++..+o. .|
[ OK ] Started Daily apt upgrade and clean activities.
[ 37.692315] cloud-init[870]: +----[SHA256]-----+
[ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems.
[ 37.728315] cloud-init[870]: Generating public/private ecdsa key pair.
[ OK ] Started Discard unused blocks once a week.
[ 37.760596] cloud-init[870]: Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
[ OK ] Started Daily rotation of log files.
[ 37.796361] cloud-init[870]: Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
[ OK ] Started Daily man-db regeneration.
[ 37.836358] cloud-init[870]: The key fingerprint is:
[ OK ] Reached target Timers.
[ 37.868322] cloud-init[870]: SHA256:qf9P6ngy0C4/ovLsoC/A3SAtv3T0cQINiBtgPGD4d1M root@ten64-sid
[ OK ] Started Getty on tty1.
[ 37.908303] cloud-init[870]: The key's randomart image is:
[ OK ] Started Serial Getty on ttyS0.
[ 37.932332] cloud-init[870]: +---[ECDSA 256]---+
[ OK ] Reached target Login Prompts.
[ 37.956386] cloud-init[870]: |Bo. ..o |
[ OK ] Started OpenBSD Secure Shell server.
[ 37.988351] cloud-init[870]: |+= . . .E |
[ OK ] Started User Login Management.
[ 38.020355] cloud-init[870]: | .= .. |
[ OK ] Started Unattended Upgrades Shutdown.
[ 38.056326] cloud-init[870]: | +.o..oo o |
[ OK ] Started System Logging Service.
[ 38.096390] cloud-init[870]: |. =.+..oS |
[ OK ] Reached target Multi-User System.
[ 38.128416] cloud-init[870]: |.. + o.o. |
[ OK ] Reached target Graphical Interface.
[ 38.164395] cloud-init[870]: |. o o .o . |
Starting Update UTMP about System Runlevel Changes...
[ 38.204393] cloud-init[870]: |...+ o.=..o |
[ OK ] Finished Update UTMP about System Runlevel Changes.
[ 38.240420] cloud-init[870]: |.o.+=. ++B+.. |
[ 38.276365] cloud-init[870]: +----[SHA256]-----+
[ 38.296315] cloud-init[870]: Generating public/private ed25519 key pair.
[ 38.316326] cloud-init[870]: Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
[ 38.340249] cloud-init[870]: Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
[ 38.360275] cloud-init[870]: The key fingerprint is:
[ 38.380345] cloud-init[870]: SHA256:/vPpWzkDJtf1TPG1TsZuhZ0Aj3CAaULHl8+rpZxj0Yg root@ten64-sid
[ 38.404816] cloud-init[870]: The key's randomart image is:
[ 38.420523] cloud-init[870]: +--[ED25519 256]--+
[ 38.436605] cloud-init[870]: | ....oooo.. ..|
[ 38.452561] cloud-init[870]: | ..= oo o oo*|
[ 38.468572] cloud-init[870]: | o . o. ..**|
[ 38.484624] cloud-init[870]: | o .=+o|
[ 38.500374] cloud-init[870]: | S + = .+o|
[ 38.520649] cloud-init[870]: | E o B ... |
[ 38.536267] cloud-init[870]: | o * = |
[ 38.552467] cloud-init[870]: | O. o o |
[ 38.568565] cloud-init[870]: | . o+=. |
[ 38.584564] cloud-init[870]: +----[SHA256]-----+
[ 38.620861] cloud-init[949]: Cloud-init v. 20.4.1 running 'modules:config' at Mon, 12 Apr 2021 18:21:54 +0000. Up 38.30 seconds.
[ 38.646985] cloud-init[949]: Generating locales (this might take a while)...
Starting Online ext4 Metad…a Check for All Filesystems...
Starting Rotate log files...
Starting Daily man-db regeneration...
[ OK ] Finished Online ext4 Metadata Check for All Filesystems.
Debian GNU/Linux 11 ten64-sid ttyS0
ten64-sid login: [ 49.381443] cloud-init[949]: de_DE.UTF-8... done
[ 51.562274] cloud-init[949]: de_DE.ISO-8859-1... done
[ 51.563075] cloud-init[949]: Generation complete.
[ 52.054629] device-mapper: uevent: version 1.0.3
[ 52.059458] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[ 53.892022] cloud-init[1059]: Cloud-init v. 20.4.1 running 'modules:final' at Tue, 22 Jun 2021 07:03:31 +0000. Up 53.68 seconds.
ci-info: no authorized SSH keys fingerprints found for user debian.
[ 53.973248] cloud-init[1059]: ci-info: no authorized SSH keys fingerprints found for user debian.
<14>Jun 22 07:03:31 ec2:
<14>Jun 22 07:03:31 ec2: #############################################################
<14>Jun 22 07:03:31 ec2: -----BEGIN SSH HOST KEY FINGERPRINTS-----
<14>Jun 22 07:03:31 ec2: 1024 SHA256:2oh7YmtiOtYPXp71mG0jHz/vNxAokK6rdAsd4I/pEC0 root@ten64-sid (DSA)
<14>Jun 22 07:03:31 ec2: 256 SHA256:qf9P6ngy0C4/ovLsoC/A3SAtv3T0cQINiBtgPGD4d1M root@ten64-sid (ECDSA)
<14>Jun 22 07:03:31 ec2: 256 SHA256:/vPpWzkDJtf1TPG1TsZuhZ0Aj3CAaULHl8+rpZxj0Yg root@ten64-sid (ED25519)
<14>Jun 22 07:03:31 ec2: 3072 SHA256:SBl0GdfHGjAPHphfo107ZADZeKfs51mkQQc3qnay+KU root@ten64-sid (RSA)
<14>Jun 22 07:03:31 ec2: -----END SSH HOST KEY FINGERPRINTS-----
<14>Jun 22 07:03:31 ec2: #############################################################
-----BEGIN SSH HOST KEY KEYS-----
ecdsa-sha2-nistp256 [snip] root@ten64-sid
-----END SSH HOST KEY KEYS-----
[ 54.064144] cloud-init[1059]: Cloud-init v. 20.4.1 finished at Tue, 22 Jun 2021 07:03:31 +0000. Datasource DataSourceNoCloud [seed=/dev/nvme0n1p15][dsmode=net]. Up 54.04 seconds
ten64-sid login:
Firmware v0.8.5 + openSUSE Leap 15.3¶
This release only works in legacy network mode so there will be some differences in enumeration between the other logs on this page.
- By default, openSUSE will boot in 'silent' mode - these logs have been
captured with this disabled in
/etc/default/grub
crc32+ fsl-mc: ten64: setting SFP to legacy (unmanaged) mode
fsl-mc: ten64: setting GBE ports to legacy (unmanaged) mode
fsl-mc: Booting Management Complex ... SUCCESS
fsl-mc: Management Complex booted (version: 10.20.4, boot status: 0x1)
Hit any key to stop autoboot: 0
*** U-Boot Boot Menu ***
Normal boot
Built-in recovery
Boot from NVMe
Boot from USB
Boot from SD
Boot OpenWrt from NAND
Boot from network
Boot from SATA
U-Boot console
Press UP/DOWN to move, ENTER to select
Device 0: Vendor: 0x144d Rev: GXA7301Q Prod: S674NE0NC02476
Type: Hard Disk
Capacity: 244198.3 MB = 238.4 GB (500118192 x 512)
... is now current device
Scanning nvme 0:1...
** Unable to read file / **
Found EFI removable media binary efi/boot/bootaa64.efi
device 0 offset 0x580000, size 0x40000
SF: 262144 bytes @ 0x580000 Read: OK
device 0 offset 0x600000, size 0x40000
SF: 262144 bytes @ 0x600000 Read: OK
TEN64 ft_board_setup start, blob 0000000090000000
INFO: RNG Desc SUCCESS with status 0
INFO: result 71171a86d57fc4b2
TEN64 ft_board_setup end
Card did not respond to voltage select!
mmc_init: -95, time 18
Scanning disk esdhc@2140000.blk...
Disk esdhc@2140000.blk not ready
Scanning disk nvme#0.blk#0...
** Unrecognized filesystem type **
** Unrecognized filesystem type **
Found 4 disks
TEN64 ft_board_setup start, blob 0000000087f00000
TEN64 ft_board_setup already run, not doing anything
BootOrder not defined
EFI boot manager: Cannot load any image
1439744 bytes read in 2 ms (686.5 MiB/s)
TEN64 ft_board_setup start, blob 0000000087ee7000
TEN64 ft_board_setup already run, not doing anything
Welcome to GRUB!
DPMAC7@qsgmii Waiting for PHY auto negotiation to complete.......user interrupt!
DPMAC7@qsgmii: Could not initialize
DPMAC8@qsgmii Waiting for PHY auto negotiation to complete.....user interrupt!
DPMAC8@qsgmii: Could not initialize
DPMAC9@qsgmii Waiting for PHY auto negotiation to complete.user interrupt!
DPMAC9@qsgmii: Could not initialize
DPMAC10@qsgmii Waiting for PHY auto negotiation to complete.user interrupt!
DPMAC10@qsgmii: Could not initialize
Please press 't' to show the boot menu on this console
error: ../../grub-core/video/video.c:762:no suitable video mode found.
GNU GRUB version 2.04
┌────────────────────────────────────────────────────────────────────────────┐
│*openSUSE Leap 15.3 │
│ Advanced options for openSUSE Leap 15.3 │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
└────────────────────────────────────────────────────────────────────────────┘
Use the ▲ and ▼ keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands
before booting or `c' for a command-line. ESC to return previous
menu.
Loading Linux 5.3.18-57-default ...
Loading initial ramdisk ...
EFI stub: Booting Linux Kernel...
EFI stub: EFI_RNG_PROTOCOL unavailable, KASLR will be disabled
EFI stub: ERROR: Could not determine UEFI Secure Boot status.
EFI stub: Using DTB from configuration table
EFI stub: Exiting boot services and installing virtual address map...
fsl-mc: Deploying data path layout ... SUCCESS
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.3.18-57-default (geeko@buildhost) (gcc version 7.5.0 (SUSE Linux)) #1 SMP Wed Apr 28 10:54:41 UTC 2021 (ba3c2e9)
[ 0.000000] Machine model: Traverse Ten64
[ 0.000000] efi: EFI v2.80 by Das U-Boot
[ 0.000000] efi: RTPROP=0x83dfff7040 SMBIOS=0xf69c6000 MEMRESERVE=0x83dfe85040
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000083dfffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x83de0dd300-0x83de0e0fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000083dfffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x00000000f69c5fff]
[ 0.000000] node 0: [mem 0x00000000f69c6000-0x00000000f69c6fff]
[ 0.000000] node 0: [mem 0x00000000f69c7000-0x00000000fbcbffff]
[ 0.000000] node 0: [mem 0x00000000fbcc0000-0x00000000fbccffff]
[ 0.000000] node 0: [mem 0x00000000fbcd0000-0x00000000fbdfffff]
[ 0.000000] node 0: [mem 0x0000008080000000-0x00000083dffeafff]
[ 0.000000] node 0: [mem 0x00000083dffeb000-0x00000083dffeffff]
[ 0.000000] node 0: [mem 0x00000083dfff0000-0x00000083dfff2fff]
[ 0.000000] node 0: [mem 0x00000083dfff3000-0x00000083dfff3fff]
[ 0.000000] node 0: [mem 0x00000083dfff4000-0x00000083dfff6fff]
[ 0.000000] node 0: [mem 0x00000083dfff7000-0x00000083dfffffff]
[ 0.000000] Zeroed struct page in unavailable ranges: 32 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000083dfffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 32 pages/cpu s93592 r8192 d29288 u131072
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] Speculative Store Bypass Disable mitigation not required
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3982848
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/Image-5.3.18-57-default root=UUID=1e4c6eed-b95c-4d4b-aeb8-45fd94a1db83 plymouth.enable=0
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0xf7cc0000-0xfbcc0000] (64MB)
[ 0.000000] Memory: 2980540K/16185344K available (11456K kernel code, 2082K rwdata, 5544K rodata, 6400K init, 9645K bss, 454192K reserved, 0K cma-reserved)
[ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x50/0x5f8 with crng_init=0
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] ftrace: allocating 40173 entries in 157 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=768 to nr_cpu_ids=8.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 256 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000006100000
[ 0.000000] ITS [mem 0x06020000-0x0603ffff]
[ 0.000000] ITS@0x0000000006020000: allocated 65536 Devices @80bfd80000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x00000080bfd70000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000080bfe10000
[ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c409fb33, max_idle_ns: 440795203156 ns
[ 0.000002] sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 4398046511103ns
[ 0.000425] Console: colour dummy device 80x25
[ 0.000780] printk: console [tty0] enabled
[ 0.000838] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[ 0.000851] pid_max: default: 32768 minimum: 301
[ 0.000941] LSM: Security Framework initializing
[ 0.001007] AppArmor: AppArmor initialized
[ 0.001129] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.001175] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.002126] ASID allocator initialised with 32768 entries
[ 0.002183] rcu: Hierarchical SRCU implementation.
[ 0.002942] Platform MSI: gic-its@6020000 domain created
[ 0.003011] PCI/MSI: /interrupt-controller@6000000/gic-its@6020000 domain created
[ 0.003061] fsl-mc MSI: gic-its@6020000 domain created
[ 0.003815] Remapping and enabling EFI services.
[ 0.004100] smp: Bringing up secondary CPUs ...
[ 0.004422] Detected VIPT I-cache on CPU1
[ 0.004440] GICv3: CPU1: found redistributor 1 region 0:0x0000000006120000
[ 0.004465] GICv3: CPU1: using allocated LPI pending table @0x00000080bfe20000
[ 0.004490] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.004814] Detected VIPT I-cache on CPU2
[ 0.004827] GICv3: CPU2: found redistributor 2 region 0:0x0000000006140000
[ 0.004847] GICv3: CPU2: using allocated LPI pending table @0x00000080bfe30000
[ 0.004861] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.005179] Detected VIPT I-cache on CPU3
[ 0.005192] GICv3: CPU3: found redistributor 3 region 0:0x0000000006160000
[ 0.005213] GICv3: CPU3: using allocated LPI pending table @0x00000080bfe40000
[ 0.005227] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.005545] Detected VIPT I-cache on CPU4
[ 0.005564] GICv3: CPU4: found redistributor 100 region 0:0x0000000006180000
[ 0.005597] GICv3: CPU4: using allocated LPI pending table @0x00000080bfe50000
[ 0.005620] CPU4: Booted secondary processor 0x0000000100 [0x410fd034]
[ 0.005980] Detected VIPT I-cache on CPU5
[ 0.005995] GICv3: CPU5: found redistributor 101 region 0:0x00000000061a0000
[ 0.006020] GICv3: CPU5: using allocated LPI pending table @0x00000080bfe60000
[ 0.006035] CPU5: Booted secondary processor 0x0000000101 [0x410fd034]
[ 0.006364] Detected VIPT I-cache on CPU6
[ 0.006379] GICv3: CPU6: found redistributor 102 region 0:0x00000000061c0000
[ 0.006403] GICv3: CPU6: using allocated LPI pending table @0x00000080bfe70000
[ 0.006418] CPU6: Booted secondary processor 0x0000000102 [0x410fd034]
[ 0.006752] Detected VIPT I-cache on CPU7
[ 0.006768] GICv3: CPU7: found redistributor 103 region 0:0x00000000061e0000
[ 0.006790] GICv3: CPU7: using allocated LPI pending table @0x00000080bfe80000
[ 0.006804] CPU7: Booted secondary processor 0x0000000103 [0x410fd034]
[ 0.006867] smp: Brought up 1 node, 8 CPUs
[ 0.007017] SMP: Total of 8 processors activated.
[ 0.007024] CPU features: detected: 32-bit EL0 Support
[ 0.007032] CPU features: detected: CRC32 instructions
[ 0.007891] CPU: All CPU(s) started at EL2
[ 0.007918] alternatives: patching kernel code
[ 0.433642] node 0 initialised, 3187653 pages in 430ms
[ 0.434363] devtmpfs: initialized
[ 0.437347] Registered cp15_barrier emulation handler
[ 0.437360] Registered setend emulation handler
[ 0.437371] KASLR enabled
[ 0.437576] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.437594] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.437793] pinctrl core: initialized pinctrl subsystem
[ 0.438397] SMBIOS 3.0 present.
[ 0.438412] DMI: traverse ten64/ten64, BIOS 2020.07-rc1-gb47b96d4 06/22/2021
[ 0.438766] NET: Registered protocol family 16
[ 0.439311] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.439648] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.439983] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.440034] audit: initializing netlink subsys (disabled)
[ 0.440146] audit: type=2000 audit(0.440:1): state=initialized audit_enabled=0 res=1
[ 0.440782] cpuidle: using governor ladder
[ 0.440857] cpuidle: using governor menu
[ 0.440927] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.441605] Serial: AMBA PL011 UART driver
[ 0.442577] Machine: Traverse Ten64
[ 0.442583] SoC family: QorIQ LS1088A
[ 0.442588] SoC ID: svr:0x87030010, Revision: 1.0
[ 0.449545] fsl_mc_bus 80c000000.fsl-mc: MC firmware version: 10.20.4
[ 0.452106] fsl_mc_dprc dprc.1: DMA mask not set
[ 0.456155] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.456164] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.456173] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.456181] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.883121] alg: No test for lzo-rle (lzo-rle-generic)
[ 0.883194] alg: No test for lzo-rle (lzo-rle-scomp)
[ 0.892519] ACPI: Interpreter disabled.
[ 0.892954] iommu: Default domain type: Passthrough
[ 0.893102] vgaarb: loaded
[ 0.893342] pps_core: LinuxPPS API ver. 1 registered
[ 0.893349] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.893365] PTP clock support registered
[ 0.893426] EDAC MC: Ver: 3.0.0
[ 0.893675] ima: secureboot mode unknown, no efi
[ 0.894124] NetLabel: Initializing
[ 0.894131] NetLabel: domain hash size = 128
[ 0.894137] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.894175] NetLabel: unlabeled traffic allowed by default
[ 0.894359] clocksource: Switched to clocksource arch_sys_counter
[ 0.935849] VFS: Disk quotas dquot_6.6.0
[ 0.935895] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.936227] AppArmor: AppArmor Filesystem Enabled
[ 0.936261] pnp: PnP ACPI: disabled
[ 0.939954] thermal_sys: Registered thermal governor 'fair_share'
[ 0.939956] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.939964] thermal_sys: Registered thermal governor 'step_wise'
[ 0.939972] thermal_sys: Registered thermal governor 'user_space'
[ 0.940252] NET: Registered protocol family 2
[ 0.940581] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.940701] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.941302] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.941882] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.941962] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.942171] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.942478] NET: Registered protocol family 1
[ 0.942496] NET: Registered protocol family 44
[ 0.942506] PCI: CLS 0 bytes, default 64
[ 0.942616] Trying to unpack rootfs image as initramfs...
[ 5.159501] Freeing initrd memory: 31996K
[ 5.160120] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 5.160297] kvm [1]: IPA Size Limit: 40bits
[ 5.161274] kvm [1]: vgic-v2@c0e0000
[ 5.161289] kvm [1]: GIC system register CPU interface enabled
[ 5.161386] kvm [1]: vgic interrupt IRQ1
[ 5.161513] kvm [1]: Hyp mode initialized successfully
[ 5.162523] Initialise system trusted keyrings
[ 5.162543] Key type blacklist registered
[ 5.162639] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 5.166636] zbud: loaded
[ 5.167313] Platform Keyring initialized
[ 5.176707] Key type asymmetric registered
[ 5.176715] Asymmetric key parser 'x509' registered
[ 5.176737] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 5.176836] io scheduler mq-deadline registered
[ 5.176845] io scheduler kyber registered
[ 5.176919] io scheduler bfq registered
[ 5.178783] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.179497] layerscape-pcie 3400000.pcie: host bridge /soc/pcie@3400000 ranges:
[ 5.179521] layerscape-pcie 3400000.pcie: IO 0x2000010000..0x200001ffff -> 0x0000000000
[ 5.179539] layerscape-pcie 3400000.pcie: MEM 0x2040000000..0x207fffffff -> 0x0040000000
[ 5.179827] layerscape-pcie 3400000.pcie: iATU unroll: disabled
[ 5.179836] layerscape-pcie 3400000.pcie: Detected iATU regions: 256 outbound, 24 inbound
[ 6.180077] layerscape-pcie 3400000.pcie: Phy link never came up
[ 6.180160] layerscape-pcie 3400000.pcie: PCI host bridge to bus 0000:00
[ 6.180172] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 6.180180] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 6.180191] pci_bus 0000:00: root bus resource [mem 0x2040000000-0x207fffffff] (bus address [0x40000000-0x7fffffff])
[ 6.180218] pci 0000:00:00.0: [1957:80c0] type 01 class 0x060400
[ 6.180281] pci 0000:00:00.0: supports D1 D2
[ 6.180289] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
[ 6.182289] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 6.182406] layerscape-pcie 3500000.pcie: host bridge /soc/pcie@3500000 ranges:
[ 6.182431] layerscape-pcie 3500000.pcie: IO 0x2800010000..0x280001ffff -> 0x0000000000
[ 6.182448] layerscape-pcie 3500000.pcie: MEM 0x2840000000..0x287fffffff -> 0x0040000000
[ 6.182485] layerscape-pcie 3500000.pcie: iATU unroll: disabled
[ 6.182494] layerscape-pcie 3500000.pcie: Detected iATU regions: 8 outbound, 6 inbound
[ 6.282527] layerscape-pcie 3500000.pcie: Link up
[ 6.282596] layerscape-pcie 3500000.pcie: PCI host bridge to bus 0001:00
[ 6.282606] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 6.282616] pci_bus 0001:00: root bus resource [io 0x10000-0x1ffff] (bus address [0x0000-0xffff])
[ 6.282628] pci_bus 0001:00: root bus resource [mem 0x2840000000-0x287fffffff] (bus address [0x40000000-0x7fffffff])
[ 6.282648] pci 0001:00:00.0: [1957:80c0] type 01 class 0x060400
[ 6.282694] pci 0001:00:00.0: supports D1 D2
[ 6.282702] pci 0001:00:00.0: PME# supported from D0 D1 D2 D3hot
[ 6.283799] pci 0001:01:00.0: [12d8:b304] type 01 class 0x060400
[ 6.284208] pci 0001:01:00.0: supports D1 D2
[ 6.284216] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 6.284381] pci 0001:01:00.0: PTM enabled (root), unknown granularity
[ 6.284446] pci 0001:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x1 link at 0001:00:00.0 (capable of 8.000 Gb/s with 5 GT/s x2 link)
[ 6.315501] pci 0001:02:01.0: [12d8:b304] type 01 class 0x060400
[ 6.315919] pci 0001:02:01.0: supports D1 D2
[ 6.315927] pci 0001:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 6.316263] pci 0001:02:02.0: [12d8:b304] type 01 class 0x060400
[ 6.316681] pci 0001:02:02.0: supports D1 D2
[ 6.316689] pci 0001:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 6.320000] pci 0001:02:01.0: PCI bridge to [bus 03]
[ 6.320040] pci 0001:02:02.0: PCI bridge to [bus 04]
[ 6.320078] pci 0001:01:00.0: PCI bridge to [bus 02-04]
[ 6.320117] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 6.320307] layerscape-pcie 3600000.pcie: host bridge /soc/pcie@3600000 ranges:
[ 6.320329] layerscape-pcie 3600000.pcie: IO 0x3000010000..0x300001ffff -> 0x0000000000
[ 6.320346] layerscape-pcie 3600000.pcie: MEM 0x3040000000..0x307fffffff -> 0x0040000000
[ 6.320384] layerscape-pcie 3600000.pcie: iATU unroll: disabled
[ 6.320393] layerscape-pcie 3600000.pcie: Detected iATU regions: 8 outbound, 6 inbound
[ 6.420425] layerscape-pcie 3600000.pcie: Link up
[ 6.420495] layerscape-pcie 3600000.pcie: PCI host bridge to bus 0002:00
[ 6.420506] pci_bus 0002:00: root bus resource [bus 00-ff]
[ 6.420515] pci_bus 0002:00: root bus resource [io 0x20000-0x2ffff] (bus address [0x0000-0xffff])
[ 6.420527] pci_bus 0002:00: root bus resource [mem 0x3040000000-0x307fffffff] (bus address [0x40000000-0x7fffffff])
[ 6.420547] pci 0002:00:00.0: [1957:80c0] type 01 class 0x060400
[ 6.420591] pci 0002:00:00.0: supports D1 D2
[ 6.420599] pci 0002:00:00.0: PME# supported from D0 D1 D2 D3hot
[ 6.421687] pci 0002:01:00.0: [144d:a80a] type 00 class 0x010802
[ 6.421788] pci 0002:01:00.0: reg 0x10: [mem 0x3040000000-0x3040003fff 64bit]
[ 6.422308] pci 0002:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8 GT/s x2 link at 0002:00:00.0 (capable of 63.012 Gb/s with 16 GT/s x4 link)
[ 6.423356] pci 0002:00:00.0: BAR 14: assigned [mem 0x3040000000-0x30400fffff]
[ 6.423370] pci 0002:01:00.0: BAR 0: assigned [mem 0x3040000000-0x3040003fff 64bit]
[ 6.423404] pci 0002:00:00.0: PCI bridge to [bus 01-ff]
[ 6.423413] pci 0002:00:00.0: bridge window [mem 0x3040000000-0x30400fffff]
[ 6.427926] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 6.429022] 21c0500.serial: ttyS0 at MMIO 0x21c0500 (irq = 8, base_baud = 21875000) is a 16550A
[ 8.026576] printk: console [ttyS0] enabled
[ 8.031043] 21c0600.serial: ttyS1 at MMIO 0x21c0600 (irq = 8, base_baud = 21875000) is a 16550A
[ 8.039973] Serial: AMBA driver
[ 8.043392] msm_serial: driver initialized
[ 8.048180] arm-smmu 5000000.iommu: probing hardware configuration...
[ 8.054627] arm-smmu 5000000.iommu: SMMUv2 with:
[ 8.059241] arm-smmu 5000000.iommu: stage 1 translation
[ 8.064557] arm-smmu 5000000.iommu: stage 2 translation
[ 8.069866] arm-smmu 5000000.iommu: nested translation
[ 8.075093] arm-smmu 5000000.iommu: stream matching with 128 register groups
[ 8.082229] arm-smmu 5000000.iommu: 64 context banks (0 stage-2 only)
[ 8.088762] arm-smmu 5000000.iommu: Supported page sizes: 0x61311000
[ 8.095205] arm-smmu 5000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA
[ 8.101643] arm-smmu 5000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA
[ 8.108832] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 8.115437] libphy: Fixed MDIO Bus: probed
[ 8.119806] libphy: Freescale XGMAC MDIO Bus: probed
[ 8.171012] libphy: Freescale XGMAC MDIO Bus: probed
[ 8.181600] libphy: Freescale XGMAC MDIO Bus: probed
[ 8.192018] libphy: Freescale XGMAC MDIO Bus: probed
[ 8.218803] libphy: Freescale XGMAC MDIO Bus: probed
[ 8.245652] mousedev: PS/2 mouse device common for all mice
[ 8.252453] ledtrig-cpu: registered to indicate activity on CPUs
[ 8.258783] hidraw: raw HID events driver (C) Jiri Kosina
[ 8.265320] drop_monitor: Initializing network drop monitor service
[ 8.272096] NET: Registered protocol family 10
[ 8.288477] Segment Routing with IPv6
[ 8.292144] RPL Segment Routing with IPv6
[ 8.296653] registered taskstats version 1
[ 8.300755] Loading compiled-in X.509 certificates
[ 8.305684] Loaded X.509 cert 'SUSE Linux Enterprise Secure Boot Signkey: 5a240449d29fd0d8a7a187e6fc0e26b95d1aa87b'
[ 8.316190] zswap: loaded using pool lzo/zbud
[ 8.320581] page_owner is disabled
[ 8.335399] Key type encrypted registered
[ 8.339418] AppArmor: AppArmor sha1 policy hashing enabled
[ 8.344928] ima: No TPM chip found, activating TPM-bypass!
[ 8.350424] ima: Allocated hash algorithm: sha256
[ 8.355156] ima: No architecture policies found
[ 8.359704] evm: Initialising EVM extended attributes:
[ 8.364843] evm: security.selinux
[ 8.368151] evm: security.apparmor
[ 8.371546] evm: security.ima
[ 8.374511] evm: security.capability
[ 8.378080] evm: HMAC attrs: 0x1
[ 8.382415] fsl_mc_dprc dprc.1: Adding to iommu group 0
[ 8.468959] fsl_mc_allocator dpbp.9: Adding to iommu group 0
[ 8.474699] fsl_mc_allocator dpbp.8: Adding to iommu group 0
[ 8.480422] fsl_mc_allocator dpbp.7: Adding to iommu group 0
[ 8.486158] fsl_mc_allocator dpbp.6: Adding to iommu group 0
[ 8.491881] fsl_mc_allocator dpbp.5: Adding to iommu group 0
[ 8.497614] fsl_mc_allocator dpbp.4: Adding to iommu group 0
[ 8.503338] fsl_mc_allocator dpbp.3: Adding to iommu group 0
[ 8.509065] fsl_mc_allocator dpbp.2: Adding to iommu group 0
[ 8.514799] fsl_mc_allocator dpbp.1: Adding to iommu group 0
[ 8.520523] fsl_mc_allocator dpbp.0: Adding to iommu group 0
[ 8.527262] fsl_mc_allocator dpmcp.34: Adding to iommu group 0
[ 8.533663] fsl_mc_allocator dpmcp.33: Adding to iommu group 0
[ 8.540070] fsl_mc_allocator dpmcp.32: Adding to iommu group 0
[ 8.546476] fsl_mc_allocator dpmcp.31: Adding to iommu group 0
[ 8.552879] fsl_mc_allocator dpmcp.30: Adding to iommu group 0
[ 8.559290] fsl_mc_allocator dpmcp.29: Adding to iommu group 0
[ 8.565695] fsl_mc_allocator dpmcp.28: Adding to iommu group 0
[ 8.572096] fsl_mc_allocator dpmcp.27: Adding to iommu group 0
[ 8.578511] fsl_mc_allocator dpmcp.26: Adding to iommu group 0
[ 8.584919] fsl_mc_allocator dpmcp.25: Adding to iommu group 0
[ 8.591324] fsl_mc_allocator dpmcp.24: Adding to iommu group 0
[ 8.597733] fsl_mc_allocator dpmcp.23: Adding to iommu group 0
[ 8.604135] fsl_mc_allocator dpmcp.22: Adding to iommu group 0
[ 8.610544] fsl_mc_allocator dpmcp.21: Adding to iommu group 0
[ 8.616953] fsl_mc_allocator dpmcp.20: Adding to iommu group 0
[ 8.623358] fsl_mc_allocator dpmcp.19: Adding to iommu group 0
[ 8.629768] fsl_mc_allocator dpmcp.18: Adding to iommu group 0
[ 8.636178] fsl_mc_allocator dpmcp.17: Adding to iommu group 0
[ 8.642585] fsl_mc_allocator dpmcp.16: Adding to iommu group 0
[ 8.648992] fsl_mc_allocator dpmcp.15: Adding to iommu group 0
[ 8.655414] fsl_mc_allocator dpmcp.14: Adding to iommu group 0
[ 8.661819] fsl_mc_allocator dpmcp.13: Adding to iommu group 0
[ 8.668226] fsl_mc_allocator dpmcp.12: Adding to iommu group 0
[ 8.674638] fsl_mc_allocator dpmcp.11: Adding to iommu group 0
[ 8.681044] fsl_mc_allocator dpmcp.10: Adding to iommu group 0
[ 8.687458] fsl_mc_allocator dpmcp.9: Adding to iommu group 0
[ 8.693776] fsl_mc_allocator dpmcp.8: Adding to iommu group 0
[ 8.700105] fsl_mc_allocator dpmcp.7: Adding to iommu group 0
[ 8.706432] fsl_mc_allocator dpmcp.6: Adding to iommu group 0
[ 8.712748] fsl_mc_allocator dpmcp.5: Adding to iommu group 0
[ 8.719075] fsl_mc_allocator dpmcp.4: Adding to iommu group 0
[ 8.725401] fsl_mc_allocator dpmcp.3: Adding to iommu group 0
[ 8.731723] fsl_mc_allocator dpmcp.2: Adding to iommu group 0
[ 8.738050] fsl_mc_allocator dpmcp.1: Adding to iommu group 0
[ 8.743869] fsl_mc_allocator dpcon.72: Adding to iommu group 0
[ 8.749779] fsl_mc_allocator dpcon.71: Adding to iommu group 0
[ 8.755698] fsl_mc_allocator dpcon.70: Adding to iommu group 0
[ 8.761602] fsl_mc_allocator dpcon.69: Adding to iommu group 0
[ 8.767513] fsl_mc_allocator dpcon.68: Adding to iommu group 0
[ 8.773417] fsl_mc_allocator dpcon.67: Adding to iommu group 0
[ 8.779331] fsl_mc_allocator dpcon.66: Adding to iommu group 0
[ 8.785240] fsl_mc_allocator dpcon.65: Adding to iommu group 0
[ 8.791146] fsl_mc_allocator dpcon.64: Adding to iommu group 0
[ 8.797060] fsl_mc_allocator dpcon.63: Adding to iommu group 0
[ 8.802966] fsl_mc_allocator dpcon.62: Adding to iommu group 0
[ 8.808875] fsl_mc_allocator dpcon.61: Adding to iommu group 0
[ 8.814793] fsl_mc_allocator dpcon.60: Adding to iommu group 0
[ 8.820699] fsl_mc_allocator dpcon.59: Adding to iommu group 0
[ 8.826616] fsl_mc_allocator dpcon.58: Adding to iommu group 0
[ 8.832523] fsl_mc_allocator dpcon.57: Adding to iommu group 0
[ 8.838438] fsl_mc_allocator dpcon.56: Adding to iommu group 0
[ 8.844351] fsl_mc_allocator dpcon.55: Adding to iommu group 0
[ 8.850257] fsl_mc_allocator dpcon.54: Adding to iommu group 0
[ 8.856171] fsl_mc_allocator dpcon.53: Adding to iommu group 0
[ 8.862078] fsl_mc_allocator dpcon.52: Adding to iommu group 0
[ 8.867991] fsl_mc_allocator dpcon.51: Adding to iommu group 0
[ 8.873900] fsl_mc_allocator dpcon.50: Adding to iommu group 0
[ 8.879814] fsl_mc_allocator dpcon.49: Adding to iommu group 0
[ 8.885729] fsl_mc_allocator dpcon.48: Adding to iommu group 0
[ 8.891639] fsl_mc_allocator dpcon.47: Adding to iommu group 0
[ 8.897553] fsl_mc_allocator dpcon.46: Adding to iommu group 0
[ 8.903458] fsl_mc_allocator dpcon.45: Adding to iommu group 0
[ 8.909375] fsl_mc_allocator dpcon.44: Adding to iommu group 0
[ 8.915290] fsl_mc_allocator dpcon.43: Adding to iommu group 0
[ 8.921201] fsl_mc_allocator dpcon.42: Adding to iommu group 0
[ 8.927116] fsl_mc_allocator dpcon.41: Adding to iommu group 0
[ 8.933026] fsl_mc_allocator dpcon.40: Adding to iommu group 0
[ 8.938945] fsl_mc_allocator dpcon.39: Adding to iommu group 0
[ 8.944861] fsl_mc_allocator dpcon.38: Adding to iommu group 0
[ 8.950771] fsl_mc_allocator dpcon.37: Adding to iommu group 0
[ 8.956688] fsl_mc_allocator dpcon.36: Adding to iommu group 0
[ 8.962597] fsl_mc_allocator dpcon.35: Adding to iommu group 0
[ 8.968517] fsl_mc_allocator dpcon.34: Adding to iommu group 0
[ 8.974431] fsl_mc_allocator dpcon.33: Adding to iommu group 0
[ 8.980343] fsl_mc_allocator dpcon.32: Adding to iommu group 0
[ 8.986261] fsl_mc_allocator dpcon.31: Adding to iommu group 0
[ 8.992172] fsl_mc_allocator dpcon.30: Adding to iommu group 0
[ 8.998087] fsl_mc_allocator dpcon.29: Adding to iommu group 0
[ 9.004000] fsl_mc_allocator dpcon.28: Adding to iommu group 0
[ 9.009923] fsl_mc_allocator dpcon.27: Adding to iommu group 0
[ 9.015843] fsl_mc_allocator dpcon.26: Adding to iommu group 0
[ 9.021755] fsl_mc_allocator dpcon.25: Adding to iommu group 0
[ 9.027674] fsl_mc_allocator dpcon.24: Adding to iommu group 0
[ 9.033586] fsl_mc_allocator dpcon.23: Adding to iommu group 0
[ 9.039505] fsl_mc_allocator dpcon.22: Adding to iommu group 0
[ 9.045424] fsl_mc_allocator dpcon.21: Adding to iommu group 0
[ 9.051336] fsl_mc_allocator dpcon.20: Adding to iommu group 0
[ 9.057258] fsl_mc_allocator dpcon.19: Adding to iommu group 0
[ 9.063175] fsl_mc_allocator dpcon.18: Adding to iommu group 0
[ 9.069095] fsl_mc_allocator dpcon.17: Adding to iommu group 0
[ 9.075015] fsl_mc_allocator dpcon.16: Adding to iommu group 0
[ 9.080930] fsl_mc_allocator dpcon.15: Adding to iommu group 0
[ 9.086851] fsl_mc_allocator dpcon.14: Adding to iommu group 0
[ 9.092762] fsl_mc_allocator dpcon.13: Adding to iommu group 0
[ 9.098685] fsl_mc_allocator dpcon.12: Adding to iommu group 0
[ 9.104605] fsl_mc_allocator dpcon.11: Adding to iommu group 0
[ 9.110521] fsl_mc_allocator dpcon.10: Adding to iommu group 0
[ 9.116440] fsl_mc_allocator dpcon.9: Adding to iommu group 0
[ 9.122267] fsl_mc_allocator dpcon.8: Adding to iommu group 0
[ 9.128103] fsl_mc_allocator dpcon.7: Adding to iommu group 0
[ 9.133932] fsl_mc_allocator dpcon.6: Adding to iommu group 0
[ 9.139767] fsl_mc_allocator dpcon.5: Adding to iommu group 0
[ 9.145602] fsl_mc_allocator dpcon.4: Adding to iommu group 0
[ 9.151430] fsl_mc_allocator dpcon.3: Adding to iommu group 0
[ 9.157266] fsl_mc_allocator dpcon.2: Adding to iommu group 0
[ 9.163092] fsl_mc_allocator dpcon.1: Adding to iommu group 0
[ 9.168928] fsl_mc_allocator dpcon.0: Adding to iommu group 0
[ 9.187288] fsl_mc_dprc dprc.1: DPRC device bound to driver
[ 9.192921] pcieport 0000:00:00.0: Adding to iommu group 1
[ 9.198551] pcieport 0000:00:00.0: PME: Signaling with IRQ 353
[ 9.204513] pcieport 0000:00:00.0: AER: enabled with IRQ 353
[ 9.210364] pcieport 0001:00:00.0: Adding to iommu group 2
[ 9.215958] pcieport 0001:00:00.0: PME: Signaling with IRQ 354
[ 9.221925] pcieport 0001:00:00.0: AER: enabled with IRQ 354
[ 9.227760] pcieport 0001:01:00.0: Adding to iommu group 2
[ 9.233948] pcieport 0001:02:01.0: Adding to iommu group 2
[ 9.240014] pcieport 0001:02:01.0: DPC: error containment capabilities: Int Msg #1, RPExt- PoisonedTLP- SwTrigger- RP PIO Log 0, DL_ActiveErr-
[ 9.253241] pcieport 0001:02:02.0: Adding to iommu group 2
[ 9.259311] pcieport 0001:02:02.0: DPC: error containment capabilities: Int Msg #1, RPExt- PoisonedTLP- SwTrigger- RP PIO Log 0, DL_ActiveErr-
[ 9.272576] pcieport 0002:00:00.0: Adding to iommu group 3
[ 9.278171] pcieport 0002:00:00.0: PME: Signaling with IRQ 360
[ 9.284118] pcieport 0002:00:00.0: AER: enabled with IRQ 360
[ 9.289991] hctosys: unable to open rtc device (rtc0)
[ 9.299185] Freeing unused kernel memory: 6400K
[ 9.314388] Run /init as init process
[ 9.333789] systemd[1]: System time before build time, advancing clock.
[ 9.536667] systemd[1]: systemd 246.13+suse.127.g60e71ffa7e running in system mode. (+PAM +AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 9.561142] systemd[1]: Detected architecture arm64.
[ 9.566153] systemd[1]: Running in initial RAM disk.
Welcome to openSUSE Leap 15.3 dracut-049.1+suse.188.gbf445638-3.30.1 (Initramfs)!
[ 9.634458] systemd[1]: No hostname configured.
[ 9.638997] systemd[1]: Set hostname to <localhost>.
[ 9.644046] random: systemd: uninitialized urandom read (16 bytes read)
[ 9.650685] systemd[1]: Initializing machine ID from random generator.
[ 9.824920] systemd[1]: Queued start job for default target Initrd Default Target.
[ 9.832821] random: systemd: uninitialized urandom read (16 bytes read)
[ 9.839588] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Started Dispatch Password …ts to Console Directory Watch.
[ 9.884448] random: systemd: uninitialized urandom read (16 bytes read)
[ 9.891077] systemd[1]: Reached target Local Encrypted Volumes.
[ OK ] Reached target Local Encrypted Volumes.
[ 9.924441] systemd[1]: Reached target Local File Systems.
[ OK ] Reached target Local File Systems.
[ 9.964407] systemd[1]: Reached target Paths.
[ OK ] Reached target Paths.
[ 9.994440] systemd[1]: Reached target Slices.
[ OK ] Reached target Slices.
[ 10.024422] systemd[1]: Reached target Swap.
[ OK ] Reached target Swap.
[ 10.054426] systemd[1]: Reached target Timers.
[ OK ] Reached target Timers.
[ 10.084636] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 10.124607] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 10.154620] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 10.194560] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 10.234416] systemd[1]: Reached target Sockets.
[ OK ] Reached target Sockets.
[ 10.267644] systemd[1]: Starting Create list of static device nodes for the current kernel...
Starting Create list of st…odes for the current kernel...
[ 10.307520] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 10.346759] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 10.386906] systemd[1]: Starting Setup Virtual Console...
Starting Setup Virtual Console...
[ 10.400801] SCSI subsystem initialized
[ 10.426441] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ OK ] Finished Create list of st… nodes for the current kernel.
[ 10.465773] systemd[1]: Finished Load Kernel Modules.
[ OK ] Finished Load Kernel Modules.
[ 10.505726] systemd[1]: Finished Setup Virtual Console.
[ OK ] Finished Setup Virtual Console.
[ 10.544832] systemd[1]: Condition check resulted in dracut ask for additional cmdline parameters being skipped.
[ 10.557347] systemd[1]: Starting dracut cmdline hook...
Starting dracut cmdline hook...
[ 10.606667] systemd[1]: Starting Apply Kernel Variables...
Starting Apply Kernel Variables...
[ 10.646786] systemd[1]: Starting Create Static Device Nodes in /dev...
Starting Create Static Device Nodes in /dev...
[ 10.685990] systemd[1]: Finished Apply Kernel Variables.
[ OK ] Finished Apply Kernel Variables.
[ 10.725996] systemd[1]: Finished Create Static Device Nodes in /dev.
[ OK ] Finished Create Static Device Nodes in /dev.
[ 10.775945] systemd[1]: Finished dracut cmdline hook.
[ OK ] Finished dracut cmdline hook.
[ 10.826885] systemd[1]: Starting dracut pre-udev hook...
Starting dracut pre-udev hook...
[ 10.864758] systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
[ 10.891981] device-mapper: uevent: version 1.0.3
[ 10.896792] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
Starting Create Volatile Files and Directories...
[ OK ] Finished Create Volatile Files and Directories.
[ OK ] Finished dracut pre-udev hook.
Starting Rule-based Manage…for Device Events and Files...
[ OK ] Started Rule-based Manager for Device Events and Files.
Starting dracut pre-trigger hook...
[ OK ] Finished dracut pre-trigger hook.
Starting Coldplug All udev Devices...
[ 11.893842] input: buttons as /devices/platform/buttons/input/input0
[ 11.902171] imx-i2c 2000000.i2c: can't get pinctrl, bus recovery not supported
[ OK 11.910082] i2c i2c-0: IMX I2C adapter registered
0m] Finished 11.915909] imx-i2c 2020000.i2c: can't get pinctrl, bus recovery not supported
;1;39mColdplug A[ 11.924504] i2c i2c-1: IMX I2C adapter registered
ll udev Devices imx-i2c 2030000.i2c: can't get pinctrl, bus recovery not supported
[0m.
[ 11.939296] i2c i2c-2: IMX I2C adapter registered
[ 11.939624] sdhci: Secure Digital Host Controller Interface driver
[ 11.950511] sdhci: Copyright(c) Pierre Ossman
[ 11.955657] caam 8000000.crypto: device ID = 0x0a13030000000000 (Era 8)
[ 11.962303] caam 8000000.crypto: job rings = 3, qi = 1
[ 11.962538] sdhci-pltfm: SDHCI platform and OF driver helper
[ 11.968660] dwc3 3100000.usb: Failed to get clk 'ref': -2
[ 11.978644] dwc3 3100000.usb: IRQ host not found
[ 11.983279] dwc3 3100000.usb: IRQ dwc_usb3 not found
[ 11.983797] dwc3 3110000.usb: Failed to get clk 'ref': -2
[ OK 11.993738] dwc3 3110000.usb: IRQ host not found
m] Reached targe[ 11.999813] dwc3 3110000.usb: IRQ dwc_usb3 not found
t Syste[ 12.004411] mmc0: SDHCI controller on 2140000.esdhc [2140000.esdhc] using ADMA 64-bit
m Initialization.
[ 12.017226] nvme 0002:01:00.0: Adding to iommu group 3
[ OK 12.023027] nvme nvme0: pci function 0002:01:00.0
0m] Reached target Basic System.
[ 12.032789] fsl_mc_dpio dpio.8: Adding to iommu group 0
[ 12.041654] nvme nvme0: Shutdown timeout set to 10 seconds
[ 12.043057] fsl_mc_dpio dpio.8: probed
[ 12.051652] fsl_mc_dpio dpio.7: Adding to iommu group 0
Starting 12.053449] nvme nvme0: 8/0/0 default/read/poll queues
9mdracut initque[ 12.060924] fsl_mc_dpio dpio.7: probed
ue hook...
[ 12.067288] random: fast init done
[ 12.069451] fsl_mc_dpio dpio.6: Adding to iommu group 0
[ 12.080131] nvme0n1: p1 p2 p3
[ 12.082617] fsl_mc_dpio dpio.6: probed
[ 12.088700] fsl_mc_dpio dpio.5: Adding to iommu group 0
[ 12.098903] fsl_mc_dpio dpio.5: probed
[ 12.103737] fsl_mc_dpio dpio.4: Adding to iommu group 0
[ 12.112937] fsl_mc_dpio dpio.4: probed
[ 12.118808] fsl_mc_dpio dpio.3: Adding to iommu group 0
[ 12.130125] fsl_mc_dpio dpio.3: probed
[ 12.134314] pca953x 0-0076: 0-0076 supply vcc not found, using dummy regulator
[ 12.135417] fsl_mc_dpio dpio.2: Adding to iommu group 0
[ 12.141731] pca953x 0-0076: using no AI
[ 12.151802] fsl_mc_dpio dpio.2: probed
[ 12.153654] usbcore: registered new interface driver usbfs
[ 12.153663] GPIO line 381 (admin_led_lower) hogged as output/low
[ 12.156238] fsl_mc_dpio dpio.1: Adding to iommu group 0
[ 12.161188] usbcore: registered new interface driver hub
[ 12.170606] fsl_mc_dpio dpio.1: probed
[ 12.172422] usbcore: registered new device driver usb
[ 12.189518] dpaa2_caam dpseci.0: Adding to iommu group 0
[ 12.196446] dpaa2_caam dpseci.0: dpseci v5.3
[ 12.213693] fsl_mc_dprc dprc.1 (unnamed net_device) (uninitialized): netif_napi_add() called with weight 512
[ 12.228796] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 12.234300] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 12.242080] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
[ 12.251522] xhci-hcd xhci-hcd.0.auto: irq 14, io mem 0x03100000
[ 12.257656] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[ 12.265146] dpaa2_caam dpseci.0: FD error: 000000a0
[ 12.265933] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.270819] dpaa2_caam dpseci.0: FD error: 000000a0
[ 12.278030] usb usb1: Product: xHCI Host Controller
[ 12.282937] dpaa2_caam dpseci.0: FD error: 000000a0
[ 12.287790] usb usb1: Manufacturer: Linux 5.3.18-57-default xhci-hcd
[ 12.292693] dpaa2_caam dpseci.0: FD error: 000000a0
[ 12.299023] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 12.303935] dpaa2_caam dpseci.0: FD error: 000000a0
[ 12.309098] hub 1-0:1.0: USB hub found
[ 12.313708] dpaa2_caam dpseci.0: FD error: 000000a0
[ 12.317438] hub 1-0:1.0: 1 port detected
[ 12.322330] dpaa2_caam dpseci.0: FD error: 000000a0
[ 12.326466] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 12.334047] alg: No test for authenc(hmac(md5),cbc(aes)) (authenc-hmac-md5-cbc-aes-caam-qi2)
[ 12.336597] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 12.336606] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 12.345121] alg: No test for echainiv(authenc(hmac(md5),cbc(aes))) (echainiv-authenc-hmac-md5-cbc-aes-caam-qi2)
[ 12.352749] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 12.359246] raid6: neonx8 gen() 3142 MB/s
[ 12.361126] alg: No test for echainiv(authenc(hmac(sha1),cbc(aes))) (echainiv-authenc-hmac-sha1-cbc-aes-caam-qi2)
[ 12.369418] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
[ 12.377528] alg: No test for authenc(hmac(sha224),cbc(aes)) (authenc-hmac-sha224-cbc-aes-caam-qi2)
[ 12.381729] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.381732] usb usb2: Product: xHCI Host Controller
[ 12.381735] usb usb2: Manufacturer: Linux 5.3.18-57-default xhci-hcd
[ 12.381738] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 12.392073] alg: No test for echainiv(authenc(hmac(sha224),cbc(aes))) (echainiv-authenc-hmac-sha224-cbc-aes-caam-qi2)
[ 12.400542] hub 2-0:1.0: USB hub found
[ 12.411099] alg: No test for echainiv(authenc(hmac(sha256),cbc(aes))) (echainiv-authenc-hmac-sha256-cbc-aes-caam-qi2)
[ 12.416503] hub 2-0:1.0: 1 port detected
[ 12.421441] alg: No test for authenc(hmac(sha384),cbc(aes)) (authenc-hmac-sha384-cbc-aes-caam-qi2)
[ 12.428000] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 12.432688] alg: No test for echainiv(authenc(hmac(sha384),cbc(aes))) (echainiv-authenc-hmac-sha384-cbc-aes-caam-qi2)
[ 12.443251] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 12.448969] alg: No test for echainiv(authenc(hmac(sha512),cbc(aes))) (echainiv-authenc-hmac-sha512-cbc-aes-caam-qi2)
[ 12.457707] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
[ 12.461634] alg: No test for authenc(hmac(md5),cbc(des3_ede)) (authenc-hmac-md5-cbc-des3_ede-caam-qi2)
[ 12.470552] xhci-hcd xhci-hcd.1.auto: irq 15, io mem 0x03110000
[ 12.476095] alg: No test for echainiv(authenc(hmac(md5),cbc(des3_ede))) (echainiv-authenc-hmac-md5-cbc-des3_ede-caam-qi2)
[ 12.486873] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[ 12.494740] alg: No test for echainiv(authenc(hmac(sha1),cbc(des3_ede))) (echainiv-authenc-hmac-sha1-cbc-des3_ede-caam-qi2)
[ 12.504941] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.514727] alg: No test for echainiv(authenc(hmac(sha224),cbc(des3_ede))) (echainiv-authenc-hmac-sha224-cbc-des3_ede-caam-qi2)
[ 12.523648] usb usb3: Product: xHCI Host Controller
[ 12.529561] raid6: neonx8 xor() 2234 MB/s
[ 12.529961] alg: No test for echainiv(authenc(hmac(sha256),cbc(des3_ede))) (echainiv-authenc-hmac-sha256-cbc-des3_ede-caam-qi2)
[ 12.540536] usb usb3: Manufacturer: Linux 5.3.18-57-default xhci-hcd
[ 12.549204] alg: No test for echainiv(authenc(hmac(sha384),cbc(des3_ede))) (echainiv-authenc-hmac-sha384-cbc-des3_ede-caam-qi2)
[ 12.559954] usb usb3: SerialNumber: xhci-hcd.1.auto
[ 12.567569] alg: No test for echainiv(authenc(hmac(sha512),cbc(des3_ede))) (echainiv-authenc-hmac-sha512-cbc-des3_ede-caam-qi2)
[ 12.578946] hub 3-0:1.0: USB hub found
[ 12.583618] alg: No test for authenc(hmac(md5),cbc(des)) (authenc-hmac-md5-cbc-des-caam-qi2)
[ 12.587842] hub 3-0:1.0: 1 port detected
[ 12.599378] alg: No test for echainiv(authenc(hmac(md5),cbc(des))) (echainiv-authenc-hmac-md5-cbc-des-caam-qi2)
[ 12.605856] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 12.617554] alg: No test for echainiv(authenc(hmac(sha1),cbc(des))) (echainiv-authenc-hmac-sha1-cbc-des-caam-qi2)
[ 12.622037] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 12.633898] alg: No test for echainiv(authenc(hmac(sha224),cbc(des))) (echainiv-authenc-hmac-sha224-cbc-des-caam-qi2)
[ 12.637278] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 12.646115] alg: No test for echainiv(authenc(hmac(sha256),cbc(des))) (echainiv-authenc-hmac-sha256-cbc-des-caam-qi2)
[ 12.649686] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 12.660128] alg: No test for echainiv(authenc(hmac(sha384),cbc(des))) (echainiv-authenc-hmac-sha384-cbc-des-caam-qi2)
[ 12.665302] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
[ 12.675891] alg: No test for echainiv(authenc(hmac(sha512),cbc(des))) (echainiv-authenc-hmac-sha512-cbc-des-caam-qi2)
[ 12.683160] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.693836] alg: No test for authenc(hmac(md5),rfc3686(ctr(aes))) (authenc-hmac-md5-rfc3686-ctr-aes-caam-qi2)
[ 12.700308] usb usb4: Product: xHCI Host Controller
[ 12.700310] raid6: neonx4 gen() 3016 MB/s
[ 12.700315] usb usb4: Manufacturer: Linux 5.3.18-57-default xhci-hcd
[ 12.710992] alg: No test for seqiv(authenc(hmac(md5),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-md5-rfc3686-ctr-aes-caam-qi2)
[ 12.719030] usb usb4: SerialNumber: xhci-hcd.1.auto
[ 12.729757] alg: No test for seqiv(authenc(hmac(sha1),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha1-rfc3686-ctr-aes-caam-qi2)
[ 12.738186] hub 4-0:1.0: USB hub found
[ 12.748598] alg: No test for authenc(hmac(sha224),rfc3686(ctr(aes))) (authenc-hmac-sha224-rfc3686-ctr-aes-caam-qi2)
[ 12.755786] hub 4-0:1.0: 1 port detected
[ 12.765763] alg: No test for seqiv(authenc(hmac(sha224),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha224-rfc3686-ctr-aes-caam-qi2)
[ 12.838165] alg: No test for seqiv(authenc(hmac(sha256),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha256-rfc3686-ctr-aes-caam-qi2)
[ 12.849874] alg: No test for seqiv(authenc(hmac(sha384),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha384-rfc3686-ctr-aes-caam-qi2)
[ 12.858374] alg: No test for authenc(hmac(sha224),ecb(cipher_null)) (authenc-hmac-sha224-ecb-cipher_null-caam)
[ 12.861562] alg: No test for seqiv(authenc(hmac(sha512),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha512-rfc3686-ctr-aes-caam-qi2)
[ 12.871452] raid6: neonx4 xor() 2162 MB/s
[ 12.871534] alg: No test for authenc(hmac(sha256),ecb(cipher_null)) (authenc-hmac-sha256-ecb-cipher_null-caam)
[ 12.883040] dpaa2_caam dpseci.0: algorithms registered in /proc/crypto
[ 12.898094] alg: No test for authenc(hmac(sha384),ecb(cipher_null)) (authenc-hmac-sha384-ecb-cipher_null-caam)
[ 12.913993] alg: No test for authenc(hmac(sha512),ecb(cipher_null)) (authenc-hmac-sha512-ecb-cipher_null-caam)
[ 12.924139] alg: No test for authenc(hmac(md5),cbc(aes)) (authenc-hmac-md5-cbc-aes-caam)
[ 12.932382] alg: No test for echainiv(authenc(hmac(md5),cbc(aes))) (echainiv-authenc-hmac-md5-cbc-aes-caam)
[ 12.981455] alg: No test for echainiv(authenc(hmac(sha1),cbc(aes))) (echainiv-authenc-hmac-sha1-cbc-aes-caam)
[ 12.991522] alg: No test for authenc(hmac(sha224),cbc(aes)) (authenc-hmac-sha224-cbc-aes-caam)
[ 12.994364] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 13.000300] alg: No test for echainiv(authenc(hmac(sha224),cbc(aes))) (echainiv-authenc-hmac-sha224-cbc-aes-caam)
[ 13.034355] raid6: neonx2 gen() 2783 MB/s
[ 13.056433] alg: No test for echainiv(authenc(hmac(sha256),cbc(aes))) (echainiv-authenc-hmac-sha256-cbc-aes-caam)
[ 13.066844] alg: No test for authenc(hmac(sha384),cbc(aes)) (authenc-hmac-sha384-cbc-aes-caam)
[ 13.075629] alg: No test for echainiv(authenc(hmac(sha384),cbc(aes))) (echainiv-authenc-hmac-sha384-cbc-aes-caam)
[ 13.114755] dpaa2_caam dpseci.0: hash algorithms registered in /proc/crypto
[ 13.132222] alg: No test for echainiv(authenc(hmac(sha512),cbc(aes))) (echainiv-authenc-hmac-sha512-cbc-aes-caam)
[ 13.142573] alg: No test for authenc(hmac(md5),cbc(des3_ede)) (authenc-hmac-md5-cbc-des3_ede-caam)
[ 13.151746] alg: No test for echainiv(authenc(hmac(md5),cbc(des3_ede))) (echainiv-authenc-hmac-md5-cbc-des3_ede-caam)
[ 13.168166] alg: No test for echainiv(authenc(hmac(sha1),cbc(des3_ede))) (echainiv-authenc-hmac-sha1-cbc-des3_ede-caam)
[ 13.184676] alg: No test for echainiv(authenc(hmac(sha224),cbc(des3_ede))) (echainiv-authenc-hmac-sha224-cbc-des3_ede-caam)
[ 13.196254] usb 3-1: New USB device found, idVendor=0424, idProduct=2744, bcdDevice= 2.08
[ 13.201525] alg: No test for echainiv(authenc(hmac(sha256),cbc(des3_ede))) (echainiv-authenc-hmac-sha256-cbc-des3_ede-caam)
[ 13.204437] raid6: neonx2 xor() 2006 MB/s
[ 13.204444] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 13.221274] alg: No test for echainiv(authenc(hmac(sha384),cbc(des3_ede))) (echainiv-authenc-hmac-sha384-cbc-des3_ede-caam)
[ 13.226987] usb 3-1: Product: USB2744
[ 13.226991] usb 3-1: Manufacturer: Microchip Tech
[ 13.243834] alg: No test for echainiv(authenc(hmac(sha512),cbc(des3_ede))) (echainiv-authenc-hmac-sha512-cbc-des3_ede-caam)
[ 13.257711] alg: No test for authenc(hmac(md5),cbc(des)) (authenc-hmac-md5-cbc-des-caam)
[ 13.265929] alg: No test for echainiv(authenc(hmac(md5),cbc(des))) (echainiv-authenc-hmac-md5-cbc-des-caam)
[ 13.281413] alg: No test for echainiv(authenc(hmac(sha1),cbc(des))) (echainiv-authenc-hmac-sha1-cbc-des-caam)
[ 13.291473] hub 3-1:1.0: USB hub found
[ 13.295262] hub 3-1:1.0: 4 ports detected
[ 13.297082] alg: No test for echainiv(authenc(hmac(sha224),cbc(des))) (echainiv-authenc-hmac-sha224-cbc-des-caam)
[ 13.315255] alg: No test for echainiv(authenc(hmac(sha256),cbc(des))) (echainiv-authenc-hmac-sha256-cbc-des-caam)
[ 13.331232] alg: No test for echainiv(authenc(hmac(sha384),cbc(des))) (echainiv-authenc-hmac-sha384-cbc-des-caam)
[ 13.347291] alg: No test for echainiv(authenc(hmac(sha512),cbc(des))) (echainiv-authenc-hmac-sha512-cbc-des-caam)
[ 13.357574] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 13.357640] alg: No test for authenc(hmac(md5),rfc3686(ctr(aes))) (authenc-hmac-md5-rfc3686-ctr-aes-caam)
[ 13.374280] alg: No test for seqiv(authenc(hmac(md5),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-md5-rfc3686-ctr-aes-caam)
[ 13.374351] raid6: neonx1 gen() 2282 MB/s
[ 13.385139] alg: No test for seqiv(authenc(hmac(sha1),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha1-rfc3686-ctr-aes-caam)
[ 13.400293] alg: No test for authenc(hmac(sha224),rfc3686(ctr(aes))) (authenc-hmac-sha224-rfc3686-ctr-aes-caam)
[ 13.410490] alg: No test for seqiv(authenc(hmac(sha224),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha224-rfc3686-ctr-aes-caam)
[ 13.410568] usb 4-1: New USB device found, idVendor=0424, idProduct=5744, bcdDevice= 2.08
[ 13.421870] alg: No test for seqiv(authenc(hmac(sha256),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha256-rfc3686-ctr-aes-caam)
[ 13.429902] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[ 13.441262] alg: No test for seqiv(authenc(hmac(sha384),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha384-rfc3686-ctr-aes-caam)
[ 13.448270] usb 4-1: Product: USB5744
[ 13.459628] alg: No test for seqiv(authenc(hmac(sha512),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha512-rfc3686-ctr-aes-caam)
[ 13.463155] usb 4-1: Manufacturer: Microchip Tech
[ 13.474394] caam algorithms registered in /proc/crypto
[ 13.497780] hub 4-1:1.0: USB hub found
[ 13.501569] hub 4-1:1.0: 4 ports detected
[ 13.554353] raid6: neonx1 xor() 1631 MB/s
[ 13.724358] raid6: int64x8 gen() 1609 MB/s
[ 13.894347] raid6: int64x8 xor() 1009 MB/s
[ 14.064348] raid6: int64x4 gen() 2255 MB/s
[ 14.142269] caam 8000000.crypto: caam pkc algorithms registered in /proc/crypto
[ 14.149593] caam 8000000.crypto: registering rng-caam
[ 14.200914] random: crng init done
[ 14.204318] random: 7 urandom warning(s) missed due to ratelimiting
[ 14.234355] raid6: int64x4 xor() 1143 MB/s
[ 14.404352] raid6: int64x2 gen() 1891 MB/s
[ 14.574348] raid6: int64x2 xor() 1014 MB/s
[ 14.744358] raid6: int64x1 gen() 1327 MB/s
[ 14.914350] raid6: int64x1 xor() 731 MB/s
[ 14.918615] raid6: using algorithm neonx8 gen() 3142 MB/s
[ 14.924010] raid6: .... xor() 2234 MB/s, rmw enabled
[ 14.928977] raid6: using neon recovery algorithm
[ 14.992148] xor: measuring software checksum speed
[ 15.094347] 8regs : 3055.200 MB/sec
[ 15.194347] 32regs : 3747.200 MB/sec
[ 15.294347] arm64_neon: 3306.000 MB/sec
[ 15.298526] xor: using function: 32regs (3747.200 MB/sec)
[ 15.456900] Btrfs loaded, crc32c=crc32c-generic, assert=on
[ 15.471755] BTRFS: device label ROOT devid 1 transid 45 /dev/nvme0n1p3
[ OK ] Found device SAMSUNG MZVL2256HCHQ-00B00 ROOT.
[ OK ] Finished dracut initqueue hook.
[ OK ] Reached target Initrd Root Device.
[ OK ] Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems.
Starting dracut pre-mount hook...
[ 15.778411] dracut-pre-mount[684]: Created symlink /etc/systemd/system/systemd-fsck-root.service → /dev/null.
[ 16.666917] nvme0n1: p1 p2 p3
[ 16.693706] dracut-pre-mount[1012]: Removed /etc/systemd/system/systemd-fsck-root.service.
[ OK ] Finished dracut pre-mount hook.
Starting File System Check…b95c-4d4b-aeb8-45fd94a1db83...
[ OK ] Finished File System Check…d-b95c-4d4b-aeb8-45fd94a1db83.
Mounting /sysroot...
[ 17.159237] BTRFS info (device nvme0n1p3): disk space caching is enabled
[ 17.166036] BTRFS info (device nvme0n1p3): has skinny extents
[ 17.176106] BTRFS info (device nvme0n1p3): enabling ssd optimizations
[ OK ] Mounted /sysroot.
[ OK ] Reached target Initrd Root File System.
Starting Reload Configuration from the Real Root...
[ OK ] Finished Reload Configuration from the Real Root.
[ OK ] Reached target Initrd File Systems.
[ OK ] Reached target Initrd Default Target.
Starting dracut pre-pivot and cleanup hook...
[ OK ] Finished dracut pre-pivot and cleanup hook.
Starting Cleaning Up and Shutting Down Daemons...
[ OK ] Stopped target Timers.
[ OK ] Stopped dracut pre-pivot and cleanup hook.
[ OK ] Stopped target Initrd Default Target.
[ OK ] Stopped target Basic System.
[ OK ] Stopped target Initrd Root Device.
[ OK ] Stopped target Paths.
[ OK ] Stopped target Remote File Systems.
[ OK ] Stopped target Remote File Systems (Pre).
[ OK ] Stopped target Slices.
[ OK ] Stopped target Sockets.
[ OK ] Stopped target System Initialization.
[ OK ] Stopped target Swap.
[ OK ] Stopped dracut pre-mount hook.
[ OK ] Stopped target Local Encrypted Volumes.
[ OK ] Stopped Dispatch Password …ts to Console Directory Watch.
[ OK ] Stopped dracut initqueue hook.
[ OK ] Stopped Apply Kernel Variables.
[ OK ] Stopped Load Kernel Modules.
[ OK ] Stopped Create Volatile Files and Directories.
[ OK ] Stopped target Local File Systems.
[ OK ] Stopped Coldplug All udev Devices.
[ OK ] Stopped dracut pre-trigger hook.
Stopping Rule-based Manage…for Device Events and Files...
[ OK ] Stopped Setup Virtual Console.
[ OK ] Stopped Rule-based Manager for Device Events and Files.
[ OK ] Closed udev Control Socket.
[ OK ] Closed udev Kernel Socket.
[ OK ] Stopped dracut pre-udev hook.
[ OK ] Stopped dracut cmdline hook.
Starting Cleanup udev Database...
[ OK ] Stopped Create Static Device Nodes in /dev.
[ OK ] Stopped Create list of sta… nodes for the current kernel.
[ OK ] Finished Cleaning Up and Shutting Down Daemons.
[ OK ] Finished Cleanup udev Database.
[ OK ] Reached target Switch Root.
Starting Switch Root...
[ 19.172144] systemd-journald[206]: Received SIGTERM from PID 1 (systemd).
[ 19.508770] systemd[1]: systemd 246.13+suse.127.g60e71ffa7e running in system mode. (+PAM +AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 19.533209] systemd[1]: Detected architecture arm64.
Welcome to openSUSE Leap 15.3!
[ 19.948716] systemd[1]: initrd-switch-root.service: Succeeded.
[ 19.955182] systemd[1]: Stopped Switch Root.
[ OK ] Stopped Switch Root.
[ 19.985099] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[ 19.995756] systemd[1]: Created slice system-getty.slice.
[ OK ] Created slice system-getty.slice.
[ 20.034889] systemd[1]: Created slice system-modprobe.slice.
[ OK ] Created slice system-modprobe.slice.
[ 20.075679] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ 20.114842] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 20.156165] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Started Dispatch Password …ts to Console Directory Watch.
[ 20.194969] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ OK ] Set up automount Arbitrary…s File System Automount Point.
[ 20.234439] systemd[1]: Reached target Local Encrypted Volumes.
[ OK ] Reached target Local Encrypted Volumes.
[ 20.274437] systemd[1]: Stopped target Switch Root.
[ OK ] Stopped target Switch Root.
[ 20.304417] systemd[1]: Stopped target Initrd File Systems.
[ OK ] Stopped target Initrd File Systems.
[ 20.344399] systemd[1]: Stopped target Initrd Root File System.
[ OK ] Stopped target Initrd Root File System.
[ 20.384457] systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
[ 20.424411] systemd[1]: Reached target Slices.
[ OK ] Reached target Slices.
[ 20.454430] systemd[1]: Reached target System Time Set.
[ OK ] Reached target System Time Set.
[ 20.494570] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ OK ] Listening on Device-mapper event daemon FIFOs.
[ 20.534636] systemd[1]: Listening on LVM2 poll daemon socket.
[ OK ] Listening on LVM2 poll daemon socket.
[ 20.574486] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ 20.614672] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 20.654577] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 20.696245] systemd[1]: Activating swap /dev/disk/by-uuid/9aff7a2c-5ce2-4deb-88a9-59cd58ebb210...
Activating swap /dev/disk/…5ce2-4deb-88a9-59cd58ebb210...
[ 20.736549] systemd[1]: Mounting Huge Pages File System...
Mounting Huge Pages File System...
[ 20.754394] Adding 511996k swap on /dev/nvme0n1p2. Priority:-2 extents:1 across:511996k SSFS
[ 20.776437] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 20.816514] systemd[1]: Mounting Kernel Debug File System...
Mounting Kernel Debug File System...
[ 20.856551] systemd[1]: Mounting Kernel Trace File System...
Mounting Kernel Trace File System...
[ 20.896787] systemd[1]: Starting Create list of static device nodes for the current kernel...
Starting Create list of st…odes for the current kernel...
[ 20.936258] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
Starting Monitoring of LVM…meventd or progress polling...
[ 20.976441] systemd[1]: Starting Load Kernel Module configfs...
Starting Load Kernel Module configfs...
[ 21.016412] systemd[1]: Starting Load Kernel Module drm...
Starting Load Kernel Module drm...
[ 21.056425] systemd[1]: Starting Load Kernel Module fuse...
Starting Load Kernel Module fuse...
[ 21.085607] fuse: init (API version 7.31)
[ 21.095134] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 21.104672] systemd[1]: systemd-fsck-root.service: Succeeded.
[ 21.111105] systemd[1]: Stopped File System Check on Root Device.
[ OK ] Stopped File System Check on Root Device.
[ 21.144580] systemd[1]: Stopped Journal Service.
[ OK ] Stopped Journal Service.
[ 21.177667] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 21.217016] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 21.256670] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting Remount Root and Kernel File Systems...
[ 21.275455] BTRFS info (device nvme0n1p3): use lzo compression, level 0
[ 21.282077] BTRFS info (device nvme0n1p3): disk space caching is enabled
[ 21.296723] systemd[1]: Starting Coldplug All udev Devices...
Starting Coldplug All udev Devices...
[ 21.336872] systemd[1]: sysroot.mount: Succeeded.
[ 21.347184] systemd[1]: Activated swap /dev/disk/by-uuid/9aff7a2c-5ce2-4deb-88a9-59cd58ebb210.
[ OK ] Activated swap /dev/disk/b…c-5ce2-4deb-88a9-59cd58ebb210.
[ 21.385008] systemd[1]: Mounted Huge Pages File System.
[ OK ] Mounted Huge Pages File System.
[ 21.424737] systemd[1]: Mounted POSIX Message Queue File System.
[ OK ] Mounted POSIX Message Queue File System.
[ 21.464784] systemd[1]: Mounted Kernel Debug File System.
[ OK ] Mounted Kernel Debug File System.
[ 21.504694] systemd[1]: Mounted Kernel Trace File System.
[ OK ] Mounted Kernel Trace File System.
[ 21.545311] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ OK ] Finished Create list of st… nodes for the current kernel.
[ 21.585078] systemd[1]: modprobe@configfs.service: Succeeded.
[ 21.591371] systemd[1]: Finished Load Kernel Module configfs.
[ OK ] Finished Load Kernel Module configfs.
[ 21.624736] systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
[ OK ] Finished Load Kernel Module drm.
[ OK ] Finished Load Kernel Module fuse.
[ OK ] Finished Load Kernel Modules.
[ OK ] Finished Remount Root and Kernel File Systems.
[ OK ] Reached target Swap.
Mounting FUSE Control File System...
Mounting Kernel Configuration File System...
Starting Apply Kernel Variables...
Starting Create Static Device Nodes in /dev...
[ OK ] Finished Coldplug All udev Devices.
[ OK ] Mounted FUSE Control File System.
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Finished Create Static Device Nodes in /dev.
[ OK ] Finished Apply Kernel Variables.
Starting Wait for udev To …plete Device Initialization...
Starting Rule-based Manage…for Device Events and Files...
[ OK ] Started Rule-based Manager for Device Events and Files.
Starting Load Kernel Module configfs...
[ 22.682393] qoriq-cpufreq qoriq-cpufreq: Freescale QorIQ CPU frequency scaling driver
[ OK ] Finished Load Kernel Module configfs.
[ 22.716841] optee: probing for conduit method.
[ 22.721299] optee: api uid mismatch
[ 22.724841] optee: probe of firmware:optee failed with error -22
[ 22.752165] i2c i2c-2: Added multiplexed i2c bus 3
[ 22.757099] i2c i2c-2: Added multiplexed i2c bus 4
[ 22.761898] pca954x 2-0070: registered 2 multiplexed busses for I2C mux pca9540
[ 22.788572] tpm tpm0: starting up the TPM manually
[ 22.840443] sp805-wdt c000000.wdt: registration successful
[ 22.846878] fsl_dpaa2_eth dpni.9: Adding to iommu group 0
[ 22.849146] sp805-wdt c010000.wdt: registration successful
[ 22.858259] sp805-wdt c020000.wdt: registration successful
[ 22.863997] sp805-wdt c030000.wdt: registration successful
[ 22.869734] sp805-wdt c100000.wdt: registration successful
[ 22.875451] sp805-wdt c110000.wdt: registration successful
[ 22.881197] sp805-wdt c120000.wdt: registration successful
[ 22.887029] sp805-wdt c130000.wdt: registration successful
[ 22.892738] fsl_dpaa2_eth dpni.9: Probed interface eth0
[ 22.898130] fsl_dpaa2_eth dpni.8: Adding to iommu group 0
[ 22.935109] cryptd: max_cpu_qlen set to 1000
[ 22.944047] fsl_dpaa2_eth dpni.8: Probed interface eth1
[ 22.949473] fsl_dpaa2_eth dpni.7: Adding to iommu group 0
[ 22.994973] fsl_dpaa2_eth dpni.7: Probed interface eth2
[ 23.000347] fsl_dpaa2_eth dpni.6: Adding to iommu group 0
[ 23.045775] fsl_dpaa2_eth dpni.6: Probed interface eth3
[ 23.051104] fsl_dpaa2_eth dpni.5: Adding to iommu group 0
[ OK ] Finished Monitoring of LVM… dmeventd or progress polling.
[ 23.097468] fsl_dpaa2_eth dpni.5: Probed interface eth4
[ 23.102781] fsl_dpaa2_eth dpni.4: Adding to iommu group 0
[ OK ] Reached target Local File Systems (Pre).
[ 23.148093] fsl_dpaa2_eth dpni.4: Probed interface eth5
[ 23.153398] fsl_dpaa2_eth dpni.3: Adding to iommu group 0
Mounting /.snapshots...
[ 23.198757] fsl_dpaa2_eth dpni.3: Probed interface eth6
[ 23.204071] fsl_dpaa2_eth dpni.2: Adding to iommu group 0
Mounting /boot/efi...
Mounting /boot/grub2/arm64-efi...
[ 23.250551] fsl_dpaa2_eth dpni.2: Probed interface eth7
[ 23.257314] fsl_dpaa2_eth dpni.1: Adding to iommu group 0
Mounting /home...
[ 23.302727] fsl_dpaa2_eth dpni.1: Probed interface eth8
[ 23.308070] fsl_dpaa2_eth dpni.0: Adding to iommu group 0
Mounting /opt...
Mounting /root...
[ 23.353407] fsl_dpaa2_eth dpni.0: Probed interface eth9
[ 23.364914] fsl_dpaa2_eth dpni.8 rename3: renamed from eth1
Mounting /srv...
Mounting /tmp...
Mounting /usr/local...
[ 23.467445] fsl_dpaa2_eth dpni.2 rename9: renamed from eth7
Mounting /var...
[ OK ] Mounted /.snapshots.
[ 23.545333] fsl_dpaa2_eth dpni.1 rename10: renamed from eth8
[ OK ] Mounted /boot/efi.
[ OK ] Mounted /boot/grub2/arm64-efi.
[ OK ] Mounted /home.
[ 23.624844] fsl_dpaa2_eth dpni.0 eth1: renamed from eth9
[ OK ] Mounted /opt.
[ OK ] Mounted /root.
[ OK ] Mounted /srv.
[ 23.715089] fsl_dpaa2_eth dpni.9 eth7: renamed from eth0
[ OK ] Mounted /tmp.
[ OK ] Mounted /usr/local.
[ 23.784604] fsl_dpaa2_eth dpni.2 eth8: renamed from rename9
[ OK ] Mounted /var.
[ 23.854663] fsl_dpaa2_eth dpni.8 eth9: renamed from rename3
[ OK ] Reached target Local File Systems.
[ 23.914665] fsl_dpaa2_eth dpni.1 eth0: renamed from rename10
Starting Restore /run/initramfs on shutdown...
Starting Flush Journal to Persistent Storage...
[ 23.976403] systemd-journald[1146]: Received client request to flush runtime journal.
[ 23.987454] systemd-journald[1146]: File /var/log/journal/826c9d7a747c44dc9bf29e8c9c7129a0/system.journal corrupted or uncleanly shut down, renaming and replacing.
Starting Load/Save Random Seed...
[ OK ] Finished Restore /run/initramfs on shutdown.
[ OK ] Finished Load/Save Random Seed.
[ OK ] Finished Wait for udev To Complete Device Initialization.
[ OK ] Finished Flush Journal to Persistent Storage.
Starting Create Volatile Files and Directories...
[ OK ] Finished Create Volatile Files and Directories.
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Finished Update UTMP about System Boot/Shutdown.
[ OK ] Reached target System Initialization.
[ OK ] Started Watch /etc/sysconfig/btrfsmaintenance.
[ OK ] Started Watch for changes in CA certificates.
[ OK ] Started Watch for changes in issue snippets.
[ OK ] Started Daily Cleanup of Snapper Snapshots.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target Paths.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
[ OK ] Started D-Bus System Message Bus.
[ OK ] Started Detect if the system suffers from bsc#1089761.
[ OK ] Started irqbalance daemon.
Starting Generate issue file for login session...
Starting Apply settings from /etc/sysconfig/keyboard...
Starting User Login Management...
Starting wicked AutoIPv4 supplicant service...
Starting wicked DHCPv4 supplicant service...
Starting wicked DHCPv6 supplicant service...
[ OK ] Started wicked AutoIPv4 supplicant service.
[ OK ] Started wicked DHCPv4 supplicant service.
[ OK ] Started wicked DHCPv6 supplicant service.
[ OK ] Finished Generate issue file for login session.
[ OK ] Finished Apply settings from /etc/sysconfig/keyboard.
Starting wicked network management service daemon...
[ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
[ OK ] Started User Login Management.
[ OK ] Started wicked network management service daemon.
Starting wicked network nanny service...
[ OK ] Started wicked network nanny service.
Starting wicked managed network interfaces...
[ 25.823623] No iBFT detected.
[ OK ] Finished wicked managed network interfaces.
[ OK ] Reached target Network.
Starting NTP client/server...
Starting OpenSSH Daemon...
Starting Permit User Sessions...
[ OK ] Finished Permit User Sessions.
[ OK ] Started Getty on tty1.
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Reached target Login Prompts.
[ OK ] Started OpenSSH Daemon.
[ OK ] Started NTP client/server.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
[ OK ] Reached target System Time Synchronized.
[ OK ] Started Backup of RPM database.
[ OK ] Started Backup of /etc/sysconfig.
[ OK ] Started Balance block groups on a btrfs filesystem.
[ OK ] Started Defragment file data and/or directory metadata.
[ OK ] Started Scrub btrfs filesystem, verify block checksums.
[ OK ] Started Discard unused blocks on a mounted filesystem.
[ OK ] Started Check if mainboard battery is Ok.
[ OK ] Started Discard unused blocks once a week.
[ OK ] Started Daily rotation of log files.
[ OK ] Started Timeline of Snapper Snapshots.
[ OK ] Reached target Timers.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Finished Update UTMP about System Runlevel Changes.
Welcome to openSUSE Leap 15.3 - Kernel 5.3.18-57-default (ttyS0).
eth0:
eth1:
eth2:
eth3:
eth4:
eth5:
eth6:
eth7:
eth8:
eth9:
localhost login: